How to Align the Timing on Chery Cowin 2?

[LaOlivia]

Specific steps are as follows: 1. Rotate the crankshaft to align the mark on the transmission with the scale line on the flywheel. 2. Rotate the camshaft to align the mark on the camshaft timing gear with the bottom of the valve chamber. 3. Locate the driving end of the oil pump shaft and align the raised rectangular side of the driving end with the direction of the crankshaft. 4. Insert the distributor assembly into the mounting hole and secure it. 5. Align the distributor rotor with the mark on the housing, then cover the distributor cap and connect the spark plug wires and various internal components. 6. Install the timing belt and start the engine for inspection. Re-adjust if any issues are found. Additional information about timing: 1. When installing the engine on the Chery Cowin 2, the ignition timing must be determined. 2. When viewing the timing gear, there is a prominent tooth on the gear. Near the top of the timing gear on the oil pump, there are three teeth. The tooth on the timing gear should be aligned with the middle one of the three teeth on the oil pump.