How to align the timing of the new Jetta?

What is the Difference Between a Four-Cylinder and a Three-Cylinder Engine?

The differences between a four-cylinder and a three-cylinder engine are as follows: Structural design: The three-cylinder engine has a simple structure, small size, light weight, and is easy to arrange. The four-cylinder engine has a relatively complex structure and one more cylinder. In terms of structural design, the three-cylinder engine has one less cylinder than the four-cylinder engine, and the corresponding camshaft has fewer attachments. Fuel consumption: The three-cylinder engine has less pumping loss. With one less cylinder, the three-cylinder engine theoretically has less resistance, and the resistance loss caused by mechanical friction is smaller than that of the four-cylinder engine. Fuel consumption will be slightly lower. Torque: The three-cylinder engine has greater low-speed torque output but smaller high-speed torque, with more significant power attenuation. The three-cylinder engine has a smaller bore and a longer piston stroke. This design is beneficial for the engine's low-speed torque. Therefore, the low torque of the three-cylinder engine is better than that of the four-cylinder engine. However, the corresponding power attenuation and responsiveness will change in the high-speed range. Differences.

16

3

Share

Do You Need to Press the Brake to Start the Car?

Currently, automatic transmission vehicles have two design modes: one requires pressing the brake to start, while the other does not. Most automatic cars do not require pressing the brake to start unless the gear is in N (Neutral) and the handbrake is not engaged. In such cases, pressing the brake is necessary for safety reasons. How Automatic Transmission Works: 1. When starting in P (Park), you must press the brake to shift into any other gear. Without pressing the brake, the gear lever cannot be moved due to a safety lock mechanism. 2. If shifting from N to D (Drive) or R (Reverse), you must also press the brake. This is because the vehicle transitions from a stationary state to motion. Failing to press the brake could cause the vehicle to jerk forward or backward abruptly, leading to safety hazards and significant damage to the transmission system. While driving, shifting from D to R without pressing the brake is not allowed. However, shifting from D to sport mode S does not require pressing the brake. Similarly, manual mode does not require it. When parking and shifting from N to P, you must press the brake; otherwise, the gear lever cannot be moved.

1

2

Share

What are the reasons for the non-illumination of the Qoros 5 central control screen?

Introduction to the reasons for the non-illumination of the Qoros 5 central control screen: 1. Power supply issues, third-party software incompatible with the system; 2. The software version is too outdated, causing system failure and inability to display properly, or screen damage; 3. Prolonged use leading to black screen due to aging circuits; 4. No image but still sound, which may indicate a loose power plug of the navigation display; 5. If there is neither sound nor image, it is likely that the DVD is faulty; 6. Severe battery depletion causing the vehicle's electrical equipment to malfunction. Additional information: The phenomenon of the car's central control screen not lighting up is most likely due to poor circuit contact. It is necessary to promptly check whether there is any loose connection in the circuit. If there is, it will naturally lead to a black screen of the central control screen. At this time, simply reconnecting the loose part properly will suffice.

10

3

Share

How to Open the Hood of a Volvo S90?

Here are the steps to open the front hood of a Volvo S90: 1. There is a switch located near the driver's left leg in the Volvo S90; pulling it will open the hood slightly, creating a gap. 2. After activating the switch inside the car, the front hood will pop up slightly, allowing you to insert your hand. 3. Slightly to the front, you can see a yellow button; reach in and press it, and the hood will fully open. Below is an introduction to the functions of the hood: 1. Airflow guidance: By directing airflow, air resistance can be decomposed into beneficial forces, increasing the grip of the front tires on the ground, which enhances the vehicle's driving stability. 2. Protection for the engine and surrounding components: By improving the strength and structure of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference. It also protects the engine, circuits, oil lines, braking system, and transmission system beneath the hood from external damage, ensuring the vehicle operates normally. 3. Assisting driving visibility: The hood helps in judging the distance between the front of the car and other vehicles or obstacles, preventing collisions. The hood is particularly helpful for parking.

1

2

Share

What is the tire pressure for winter snow tires?

Winter snow tires typically have a standard tire pressure ranging from 2.2 to 2.5 bar. Compared to regular tires, snow tires are designed with special compounds to increase traction on snow and ice-covered roads, and their tread material is softer. Here are some relevant details: Generally, it is advisable to maintain the tire pressure at the lower limit of the standard range for your car's tires. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1 bar to prevent blowouts due to high temperatures. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: standard tires should be between 2.4-2.5 bar; reinforced tires between 2.8-2.9 bar; the maximum tire pressure should not exceed 3.5 bar. Tire pressure anomalies: Generally, a pressure below 1.8 bar or above 3.0 bar will trigger an alert. In such cases, it is necessary to inspect the tires and adjust the pressure accordingly.

2

3

Share

What are the wheel specifications for the 10th-generation Civic?

The ET value for the 10th-generation Civic wheels is 45, with a bolt pattern and center bore size of 5*114.3. Below is relevant information about the Civic: 1. The Honda Civic model lineup includes three-door hatchbacks, coupe hardtop sports cars, hybrid versions, and five-door sedan versions. 2. The new Civic is the domestic version of Honda's 10th-generation Civic. 3. It is equipped with 1.5T and 1.0T engines, with the 1.5T model being launched first, paired with either a 6-speed manual or CVT transmission. Below is relevant information about wheel parameters: 1. Wheel size: Wheel diameter, where 15 or 16 inches refers to the wheel's size (diameter). 2. Width: Wheel width is commonly referred to as the J value. The wheel width affects tire selection; for the same tire size, different J values require different tire aspect ratios and widths. 3. PCD and bolt pattern: PCD, professionally known as pitch circle diameter, refers to the diameter between the fixing bolts at the center of the wheel. 4. Offset: This is the difference between the mounting surface of the wheel's center hub and the wheel's centerline.

8

3

Share

How to align the timing of the new Jetta?

What is the Difference Between a Four-Cylinder and a Three-Cylinder Engine?

Do You Need to Press the Brake to Start the Car?

What are the reasons for the non-illumination of the Qoros 5 central control screen?

How to Open the Hood of a Volvo S90?

What is the tire pressure for winter snow tires?

What are the wheel specifications for the 10th-generation Civic?

Can Chinese citizens still drive after the age of 70?

Is a 2020 model year car purchased in 2021 considered an inventory vehicle?

How to Turn Off the Horn Sound When Locking the 2021 Buick Excelle?

What are the speed limits for the three lanes in urban areas?