How to Align the Timing Chain on a BYD?

What is a Hybrid Electric Vehicle?

A hybrid electric vehicle is essentially a pure electric vehicle equipped with an additional internal combustion engine, referring to an oil-electric hybrid system that combines fuel and electric power. More relevant information is as follows: 1. Hybrid electric vehicles implement different energy supply schemes for different road environments, significantly reducing emission pollution levels. For example, during urban operation, the engine shuts off during traffic jams or at red lights. When the traffic moves or the signal turns green, the driver only needs to lightly press the accelerator pedal, and the electric motor can drive the vehicle forward. 2. In urban areas, when the car engine is idling inefficiently or the vehicle is moving slowly, using the electric motor as the power source is not only environmentally friendly but also reduces noise. Therefore, the more hybrid electric vehicles are used in increasingly congested large cities, the more their advantages in energy savings, environmental protection, and broad adaptability are demonstrated.

8

1

Share

How to Reset the Tire Pressure Warning on Sagitar?

The method to reset the tire pressure warning on Sagitar: First, turn on the ignition, then press and hold the tire pressure monitoring reset button. After hearing a "dong" sound, release the button. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to any leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other tires. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as a full direct system does.

19

2

Share

How to turn on the air conditioning cooling in the GAC GS4?

The method to turn on the cold air in the GAC GS4 is to press the AUTO button to turn on the air conditioning, then press the A/C button to activate the cooling, and finally adjust the knob to set the temperature. Below is an introduction to the GAC GS4 air conditioning buttons: 1. OFF button: Used to turn off the air conditioning system. 2. Temperature increase button: Used to raise the desired interior temperature. 3. Fan speed increase button: Used to manually increase the blower speed setting. 4. MODE button: Allows selection of the airflow direction from the vents, with adjustments displayed on the screen. 5. Recirculation button: Turns the air recirculation mode on or off. 6. A/C button: Used to activate the air conditioning cooling system.

12

2

Share

Should the Car Air Conditioner Use Internal or External Circulation in Winter?

In winter, the car air conditioner should use internal circulation. More related information is as follows: 1. Internal circulation means the air circulates inside the car without exchanging with the outside air, resulting in higher heating efficiency. However, during winter driving, the car is usually in a closed state. Prolonged use of internal circulation can lead to a decline in air quality inside the car. For short-distance driving, using internal circulation is sufficient as it heats up quickly, and the air quality inside the car won’t deteriorate too rapidly in a short time. 2. External circulation exchanges air with the outside, which results in slower heating efficiency but better air quality inside the car. For long-distance driving, you can consider using internal circulation first and switch to external circulation periodically. If the outside air quality is poor, be cautious when using external circulation.

12

3

Share

How to Open the Trunk from Inside the Roewe i5?

There are two methods to open the trunk from inside the Roewe i5: 1. After starting the Roewe i5, use the trunk opening button on the car key to open the trunk, or use the trunk opening button on the central control panel or the left side of the steering wheel. 2. If there is no such button inside the car, it might be designed as a lever located on the lower left side of the driver's seat or the lower left side of the steering wheel, marked with an icon of a raised car trunk. It is usually placed together with the fuel tank cap lever. Here is some related information about the Roewe i5: 1. The Roewe i5 is equipped with a VDC vehicle stability system, hill-start assist, traction control system, while higher-end models also include features like a panoramic camera, XDS electronic differential lock, hydraulic brake assist, and side airbags. 2. It is powered by a 1.5T engine, delivering a maximum power of 124kW (169PS) and a peak torque of 250N·m.

11

1

Share

How to adjust the headlights of Fengguang 330?

The height adjustment for Fengguang 330 headlights is located at the rear of the headlight assembly, where there is an adjustment screw. A cross-head screwdriver can be inserted directly into this screw. Standing at the front of the car, turning it to the right will raise the headlight beam. Below is an introduction to car headlight adjustments: 1. The function of a car headlight adjuster is to restore the headlight beam direction from a deviated position back to the standard direction, thereby improving the lighting effect of the headlights. 2. Headlight adjusters mainly come in two types: manual and automatic. The manual type primarily consists of a headlight adjustment motor and a manual switch. The headlight adjustment motor is located at the front headlight, while the control part is in the cabin. There is a manual switch on the dashboard, allowing the driver to adjust it as needed. The automatic type consists of a headlight adjustment motor, controller, and level sensors. The level sensors are installed at the front and rear ends of the vehicle body, mainly detecting the height from the chassis to the ground. The height difference is transmitted to the controller as an electrical signal, which then calculates and controls the headlight adjustment motor to achieve automatic headlight adjustment.

10

0

Share

How to Align the Timing Chain on a BYD?

What is a Hybrid Electric Vehicle?

How to Reset the Tire Pressure Warning on Sagitar?

How to turn on the air conditioning cooling in the GAC GS4?

Should the Car Air Conditioner Use Internal or External Circulation in Winter?

How to Open the Trunk from Inside the Roewe i5?

How to adjust the headlights of Fengguang 330?

How to turn off the rear wiper of Geely Boyue?

Where to Check the Standard Tire Pressure for Cars?

Can the Ora Black Cat Drive on Highways?

What Causes the Steering Wheel Warning Light to Illuminate?