How to Adjust When Reversing into a Parking Space is Off?

Can Diesel No. 0 and -35 Be Mixed?

Mixing half No. -35 diesel and half No. 0 diesel is acceptable. The diesel grade is merely an indicator of the fuel's resistance to congealing. The smaller the number in the diesel grade, the stronger its resistance to congealing. However, the diesel grade cannot be used as a basis for judging fuel quality. The anti-freezing capability of a mixture of half No. -35 diesel and half No. 0 diesel is certainly not as strong as that of pure No. -35 diesel. Therefore, when refueling, it is advisable to choose based on the actual local temperature. Below is an introduction to diesel usage: No. 5 diesel is suitable for use at temperatures above 8°C; No. 0 diesel is suitable for use at temperatures between 8°C and 4°C; No. -10 diesel is suitable for use at temperatures between 4°C and -5°C; No. -20 diesel is suitable for use at temperatures between -5°C and -14°C; No. -35 diesel is suitable for use at temperatures between -14°C and -29°C; No. -50 diesel is suitable for use at temperatures between -29°C and -44°C or below.

8

0

Share

What is the solution for the abnormal noise in the classic Focus?

For the abnormal noise in the classic Focus, you can try purchasing new half-shaft bearing bases and brackets, bearings, and oil seals for installation. Below is more information about the Focus: 1. Focus RS: The Focus RS is a new generation of high-performance sedan developed based on the revamped European version of the Focus. The all-new Ford Focus RS will exclusively feature Michelin tires. Among them, the Michelin Pilot Super Sport (specification 235/35/19) is its standard tire, while the Michelin Pilot Sport Cup 2 (specification 235/35/19), known for its outstanding track performance, is available as an optional tire. 2. Focus RS engine: The massive intercooler intake vents of the Focus RS run from the top of the bumper down to the front lip, adorned with black metal mesh. The fog lights are directly embedded at the front of the front fenders without any additional decoration. Two additional heat dissipation vents are added on the engine hood, and the heat dissipation vents at the rear of the front fenders suggest the car will have a powerful braking system.

2

4

Share

How to Restart After Replacing Car Key Battery?

To restart after replacing the car key battery, first start the vehicle's engine and activate the entire electronic system. Then, press and hold the lock button on the driver's side door for more than 5 seconds without releasing. The car's remote control will then complete the matching process. Below is an introduction to car keys: 1. Introduction: A car key is a tool used to switch the car on and off. Modern car keys use a chip system, which is a magnetic chip system. The car's ignition lock cylinder's reading coil will read the key's chip; each chip has fixed digital information. 2. Categories: A remote key allows you to unlock and lock the car from a distance without inserting the key into the lock. 3. Advantages: The biggest advantage is that, regardless of day or night, you do not need to locate the lock hole and can conveniently unlock and lock the car from a distance. A weak radio wave is emitted from the owner's vicinity, received by the car's antenna, and the signal code is identified by the electronic control unit (ECU). The system's actuator (motor or electromagnetic coil) then performs the lock/unlock action. The system mainly consists of two parts: a transmitter and a receiver.

16

4

Share

What to do if ETC is deducted without reason?

Methods to deal with ETC being deducted without reason: 1. Go to the bank where the ETC service was processed. You need to bring the original and photocopy of the vehicle owner's valid ID card and driving license (if it is not the owner, the agent's valid ID card is also required) and the photocopy of the driving license with the page stamped with the last annual inspection seal; 2. Fill out an application form for a refund, requesting the bank to check the account and confirm the situation of being mistakenly charged; 3. After verification by the bank, the overcharged fees can be refunded. Precautions for using ETC include: 1. The ETC transaction sensing area is 8 meters. To prevent the ETC device failure of the vehicle in front, keep a distance of more than 10 meters from the vehicle in front; 2. The recognition speed for ETC lane passage is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, which will lead to charging failure; 3. When using a debit card to bind ETC, insufficient balance will also lead to charging failure.

10

4

Share

What are the hidden features of the Malibu XL 2021?

The hidden features of the Malibu XL 2021 are as follows: 1. ACC Adaptive Cruise Control: When the vehicle speed exceeds 25km/h, the adaptive cruise system automatically adjusts the vehicle's speed to maintain a preset distance from the vehicle ahead, and can bring the vehicle to a complete stop. It can also be activated and restored to the preset speed based on the driver's input. Additionally, it offers three preset following modes: long distance, medium distance, and short distance. 2. FCA Forward Collision Alert + CIB Collision Imminent Braking: For slow-moving or stationary vehicles ahead, the system comprehensively assesses collision risks and issues dashboard warnings with audible alerts when necessary. If the driver does not actively apply the brakes, the system can trigger braking when a collision is imminent to avoid or reduce collision damage. 3. PAEB Pedestrian Automatic Emergency Braking: When the vehicle speed is between 8-80km/h, the driving detection system can monitor pedestrians and vehicles ahead in real-time, using automatic emergency braking to avoid or reduce collision-related injuries.

4

2

Share

What causes a car's brakes to feel hard and fail to stop the vehicle?

Reasons for hard and unresponsive brakes: 1. Braking before engine shutdown: The car's braking system operates at maximum efficiency when the engine is running, with the brake booster being the key component that amplifies the force applied to the brake pedal. When the engine is off, the brake booster stops functioning, and typically, the remaining vacuum force is depleted after pressing the brake pedal about three times. Thus, the hard brake feel is due to the lack of assistance from the brake booster. Solution: In this case, simply restart the engine and firmly press the brake pedal again. Once the engine is running, the brake booster will resume operation, and the brake pedal will return to normal. 2. Brake booster malfunction: If the car's brake booster is leaking or malfunctioning, and you haven't pressed the brake pedal after turning off the engine, or if you notice the brake pedal is hard to press while driving, it's likely due to a faulty brake booster, a leaking vacuum tube, or a blockage. Solution: If you notice this issue before driving, it's safest to avoid driving and have the car inspected at a repair shop immediately. If the issue arises while driving, stay calm, reduce speed gradually, and try pressing the pedal multiple times to see if braking can be restored. Applying strong pressure can often engage the brakes.

10

4

Share

How to Adjust When Reversing into a Parking Space is Off?

Can Diesel No. 0 and -35 Be Mixed?

What is the solution for the abnormal noise in the classic Focus?

How to Restart After Replacing Car Key Battery?

What to do if ETC is deducted without reason?

What are the hidden features of the Malibu XL 2021?

What causes a car's brakes to feel hard and fail to stop the vehicle?

What is the normal range for the oil dipstick?

What is the ME7?

What is the reason why the car air conditioner only has wind at the 4th speed?

What is the appropriate tire pressure for Nissan Sunny?