How to Adjust When a Vehicle Skids?

2 Answers
AndresLee
07/29/25 6:21am
Adjustment methods when a vehicle skids: 1. If a skid suddenly occurs while driving, immediately release the brake pedal and quickly turn the steering wheel toward the direction of the skid. 2. On icy or snowy roads, never use emergency braking. Emergency braking will not only fail to stop the vehicle but may also accelerate the skid or even cause a rollover. 3. Avoid sudden steering or using the foot brake. Immediately release the brake pedal, turn the steering wheel toward the side of the skid, and promptly adjust and correct the direction before continuing to drive. Vehicle skidding, especially rear-wheel skidding, poses a significant threat to driving safety and often leads to severe traffic accidents such as collisions, rollovers, or running off the road. Skidding is more likely to occur when driving on muddy roads or turning on icy surfaces at excessive speeds. In the case of front-wheel skidding, turn the steering wheel in the opposite direction of the skid. For rear-wheel skidding, turn the steering wheel in the same direction as the skid. When skidding occurs on muddy roads, turn the steering wheel appropriately in the direction of the rear-wheel skid to correct the course.
Was this review help?
15
0
Share
LaEmersyn
08/12/25 9:48am
I've been driving for almost ten years, and when I encounter a skid while turning in the rain, I remind myself not to panic. Ease off the accelerator gently, avoid braking, and steer the wheel in the direction the car is sliding—if the rear wheels slide to the left, quickly turn the wheel slightly to the left. Once the car stabilizes, gradually accelerate and straighten the wheel. I’ve also developed the habit of regularly checking tire pressure and tread. Severe wear makes skidding more likely, especially at high speeds or on curves. While driving, I pay extra attention to road conditions and slow down when encountering standing water. These small actions can prevent minor issues from escalating. Every incident teaches a new lesson, and looking back now, staying calm is the most effective approach.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What Parts Make Up a Car Body?

A car body consists of three main sections: the front body, middle body, and rear body. Each of these sections is further divided into the following components: Front Body: Front bumper; Front fender: Located below the sides of the engine hood and above the front wheels, it serves as an important decorative body part, typically made from stamped thin steel plates; Engine hood: Positioned at the front and upper part of the vehicle, it acts as a maintenance cover for the engine compartment; Front bulkhead: Situated at the front of the passenger compartment, it separates the engine compartment from the passenger area; Front longitudinal beam: This is the primary load-bearing component of the front body, directly welded to the lower part of the body. Additional components like the wheel housing (sometimes integrated with the front longitudinal beam) are welded onto it. Middle Body: Pillars, rocker panels, and floor; Roof: Refers to the top cover of the passenger compartment, which may include features like a sunroof, ventilation windows, or an antenna. The roof mainly consists of the roof panel, roof liner, and cross beams, with some models also equipped with roof racks; Doors: Serve as entry and exit points for passengers and house components such as door locks, windows, and window regulators. The door frame forms the main steel structure, with hinges, glass, and handles mounted on it. Rear Body: Trunk and trunk lid: The trunk is a storage space formed by trunk components and the body floor panels; Rear quarter panel: Refers to the body panel behind the rear door frame that covers the rear wheels and the rear side of the body; Rear bumper: Located at the tail end of the vehicle, it provides decoration and protection for the rear components.
10
3
Share

What are the reasons for the car generator fault light to come on?

The reasons for the car generator fault light to come on include sensor damage, poor contact or signal interruption. Poor engine maintenance can cause the engine fault light to illuminate. Poor quality of fuel and engine oil. Issues such as engine spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can also cause this. Here is some additional information: Sensor damage: Poor contact or signal interruption can cause the engine fault light to come on. Poor engine maintenance is the most common reason for the engine fault light to illuminate. Therefore, it is recommended that car owners perform regular maintenance and maintain good driving habits to avoid increasing the engine's operating burden. Poor quality of fuel and engine oil: If not added as required, long-term use can lead to engine wear, which in turn causes the engine fault light to come on. Usually, manufacturers recommend specific grades of fuel and types of engine oil.
14
0
Share

Can Vehicle Ownership Transfer Be Processed in Another Location?

Vehicle ownership transfer can be processed in another location. The relevant information about cross-region used car ownership transfer is as follows: Documents required for cross-region used car ownership transfer: Original and photocopy of the original owner's ID card (1 each)/original and photocopy of the agent's ID card (1 each); original and photocopy of the vehicle registration certificate (1 each, the big green book); original and photocopy of the vehicle license (1 each); original and photocopy of the original purchase invoice (red copy) or the last transfer invoice (red copy) (1 each); vehicle purchase tax payment certificate (small red book before 2001, small green book after 2001). Original ID card of the new owner (1 copy), photocopy (3 copies)/original and photocopy of the agent's ID card (1 each); vehicle registration, transfer, and cancellation form/transfer application form; if the new owner is from another region and wants a local license plate, a valid temporary residence permit is also required. Precautions for cross-region used car ownership transfer: The used car must first go through the ownership transfer and file extraction process at the location where its license plate is registered. However, before extracting the files, it is essential to inquire about the used car admission standards of the destination location, as some places also have requirements on the vehicle's age.
15
0
Share

Does a car need an annual inspection in its fourth year?

New cars require an annual inspection within 4 years, and the fourth year falls under regular annual inspection. Below is extended information: Relevant materials: Required documents for vehicle annual inspection (individual): original vehicle license, copy of compulsory traffic insurance, ID card copy, and the vehicle. Required documents for vehicle annual inspection (organization): original vehicle license, copy of compulsory traffic insurance, Organization Code Certificate of the People's Republic of China (with fresh seal), power of attorney (with fresh seal), agent's ID card copy, and the vehicle. Notes: Vehicles eligible for exemption from inspection and issuance of inspection qualification marks only need to visit the vehicle management office, motor vehicle registration service station, or traffic police squadron to fill out the "Motor Vehicle Inspection Mark Application Form" and then receive the motor vehicle inspection qualification mark and vehicle license.
12
2
Share

Does the car battery charge automatically after starting the car?

When the car is idling during startup, it automatically charges the battery. However, the prerequisite is to ensure that all electrical appliances in the car are turned off (except for the engine), and charging relies on the alternator while the car is running. Below is additional information: Principle: Under the hood, there is a component connected by multiple belts, which is the car's alternator. After the car starts, as the engine runs, it drives the alternator to work, generating electric current. The current flows through the vehicle's voltage regulator transformer, with part of it being used by the vehicle's electrical appliances and the excess charging the battery. Alternator speed: The output voltage of the alternator is directly proportional to its speed. The alternator's speed depends on the engine's speed. During the car's startup phase, the speed is relatively slow, and the alternator's output voltage is also relatively low. Only when the engine continues to operate normally can the battery's charge be better replenished.
20
0
Share

What is needed for car detailing?

Car detailing projects are categorized based on the service areas into exterior detailing, interior detailing, and paint surface detailing. Here is additional information: Car exterior detailing projects include high-pressure car washing, removal of contaminants such as asphalt and tar, waxing and polishing for enhanced shine, new car wax removal, refurbishment of wheel rims, tires, and bumpers, as well as undercarriage anti-corrosion coating. It also includes exterior decoration of the car, such as embellishing the roof, windows, body sides, and wheels. Exterior detailing mainly involves film application, undercarriage armor, engine guards, decorative strips, and accessories. Car interior detailing projects can be divided into interior decoration detailing, engine detailing, and trunk cleaning. Interior decoration detailing includes vacuuming and protecting the dashboard, ceiling, carpets, floor mats, seats, seat covers, and door interiors, as well as steam sterilization, deodorizing of air vents, interior air purification, interior cleaning, dashboard polishing, leather upholstery, and odor removal inside the car.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.