How to Adjust Vehicle Rearview Mirrors Properly?

What to Pay Attention to When Changing Tires?

Precautions for changing tires are as follows: 1. Choose the right tires: The specifications of the tires must be the same as the previous tires and must match the other tire on the same axle, such as speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. 2. Replace the valve stem: When changing tires, the aging cycle of the new tires and the valve stem may differ. The valve stem might develop issues within the new tire's cycle, so it's best to replace the valve stem at the same time as changing the tires. 3. Pay attention to the installation direction and inflation: If using the original tires, install them according to the manufacturer's requirements. For non-original tires, generally the side with the production date should face outward. For directional tires, align the arrow on the wheel with the direction of the car's forward movement. When inflating, you can inflate to the maximum pressure allowed by the tire and then reduce it to the standard pressure specified by the manufacturer.

11

0

Share

What are the symbols for China 5 and China 6?

The symbols for China 5 and China 6 are "China V, China VI". The following are the differences between China 5 and China 6: 1. Price difference: China 6 vehicles are slightly more expensive than China 5 vehicles, mainly because China 6 vehicles, in response to policy implementation, require automakers to submit applications to relevant departments and undergo various pollution tests, which increases the cost and consequently raises the vehicle's price. Additionally, China 6 vehicles are equipped with more configurations compared to China 5 to reduce environmental pollution. 2. Difference in access restrictions: With the implementation of the China 6 policy, certain vehicles that do not meet the emission standards face certain driving restrictions. Generally, China 5 or lower vehicles may be directly banned from road use due to non-compliance with emission requirements. Therefore, many owners of China 5 vehicles switch to China 6 vehicles to ensure normal road driving.

18

2

Share

What are the instructions for various buttons in the Peugeot 408?

The center console of the Peugeot 408 features a minimalist yet slightly luxurious design. The trip computer clearly indicates which door is not properly closed. The air conditioning is adjusted via the central control screen, as are the sound effects and audio distribution. The driving mode is switched using buttons behind the gear lever, while the cigarette lighter, USB, and AUX ports are located below the center console. Here is more information about the Peugeot 408: 1. Body dimensions: The new Peugeot 408 is 4750mm in length, 1820mm in width, 1488mm in height, with a wheelbase of 2730mm. 2. Powertrain: The Peugeot 408 is equipped with Dongfeng Peugeot's mainstream engines, offering two displacement options: 2.0L and 1.6L. The 2.0L model is the main promoted variant. 3. Safety: The Peugeot 408 features a unique 6+X safety system, including EVA emergency braking assistance, Bosch 8.1 version ABS anti-lock braking system, EBD electronic brake-force distribution, TSC traction control, and ESP electronic stability program.

15

1

Share

What are the differences between the Arrizo 5 and Arrizo EX?

Here are the relevant introductions about the differences between the Arrizo EX and Arrizo 5: 1. The interior adopts superior configurations like a full LCD instrument panel, optimizes the central control screen system with an 8-inch retina-level display, and comes with comprehensive functions including user-friendly features such as road rescue and traffic violation queries. 2. In terms of safety configurations, front side airbags and front/rear head airbags are added to better protect passengers in case of accidents. The number of speaker horns inside and outside the car has also been increased, providing passengers with better auditory enjoyment. The addition of rear air conditioning vents eliminates complaints from rear passengers that drivers used to hear. 3. The most significant exterior change is the redesigned lower front bumper, which gives a more dynamic look. However, the headlight source of the new model still uses halogen, which is obviously outdated. The wheel hub style has also been redesigned, featuring a simpler yet more visually appealing design compared to the previous complex one.

12

2

Share

How Many Liters of Engine Oil Should Be Added to a Small Car?

Small cars typically require 3.2~3.6 liters of engine oil. Precautions for using engine oil: Issues such as too much or too little oil, poor quality, excessive viscosity, or not changing it on time are all key factors affecting engine operation. When using engine oil, it is essential to use oil of guaranteed quality that matches your vehicle's specifications and to change it on schedule. Additionally, a dirty air filter can clog the intake tract, increasing intake resistance, reducing power, and increasing fuel consumption. Introduction to engine oil grades: Engine oil grades usually indicate viscosity and quality. Specific interpretation is as follows: The viscosity of lubricating oil is often identified using SAE grades, where SAE stands for the "Society of Automotive Engineers." The "W" stands for winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating a lower usable environmental temperature and better engine protection during cold starts. The number after the "W" (following the hyphen) indicates the oil's high-temperature resistance, with a higher number meaning better protection at high temperatures.

10

1

Share

Can I Continue Driving with a Nail in the Tire?

Tire punctured by a nail can still be driven on, but it is not recommended for long-distance or high-speed driving. Since the length of the nail is uncertain, it is unclear whether it will cause air leakage. Therefore, potential hazards should be eliminated first. Methods to protect tires are as follows: 1. Pay attention to tire pressure: Both overinflation and underinflation can cause abnormal tire wear and shorten the tire's lifespan. During the harsh winter and summer seasons, tire pressure should be adjusted regularly based on the recommendations of maintenance service stations. 2. Avoid sudden acceleration: Avoid sudden acceleration during daily driving. Starting the car abruptly from a stationary state causes intense friction between the tires and the road surface, accelerating tread wear. 3. Reduce sudden braking: Sudden braking behavior can exacerbate localized tread wear and easily lead to tire bulging or delamination. It is advisable to use coasting to slow down more often and minimize the use of brakes, especially emergency braking. 4. Drive at a steady speed: Maintain an appropriate speed and drive steadily to avoid or minimize the use of emergency braking, thereby reducing tire wear. When stopping during a trip or at a station, develop the habit of safely coasting to a stop.

12

4

Share

How to Adjust Vehicle Rearview Mirrors Properly?

What to Pay Attention to When Changing Tires?

What are the symbols for China 5 and China 6?

What are the instructions for various buttons in the Peugeot 408?

What are the differences between the Arrizo 5 and Arrizo EX?

How Many Liters of Engine Oil Should Be Added to a Small Car?

Can I Continue Driving with a Nail in the Tire?

What is the speed limit on urban roads?

How to Add Windshield Washer Fluid to Tucson?

What are the reasons for the Peugeot 408 engine overheating?

Is Annual Inspection Still Required for Vehicles Eligible for 6-Year Exemption?