How to adjust valves on a 4-cylinder engine?

What Causes Engine Vibration in Geely Vehicles?

Engine vibration in cars is most likely caused by insufficient or deteriorated engine oil. Severe Engine Carbon Buildup: The most common cause of car vibration is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injectors can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making the engine difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction, making the air-fuel mixture too rich. The constantly fluctuating air-fuel mixture causes idle vibration after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or weak sparking from the spark plugs can also lead to such issues. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the gaskets and spark plugs, but still experience body vibration at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance from the intake pressure sensor can also cause body vibration. Aging Engine Components: Car vibration can also be related to worn engine mounts. Engine mounts act as the shock absorption system for the engine, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and the cabin, causing vibration at idle.

4

3

Share

Can You Start a Car While the Battery is Charging?

You can start a car while the battery is charging, but doing so will directly damage the charger, making it an incorrect and discouraged practice. The vehicle relies on the battery's power supply during the startup moment. After starting the car and letting it idle, the power comes from the alternator, not the battery. The alternator's electricity is only sufficient for driving or idling and cannot charge the battery. Attempting to charge the battery by starting the vehicle is inefficient, results in a weak charge, wastes fuel, and is unsafe. The best method for battery maintenance is to use a proper battery charger and follow correct charging procedures, prioritizing safety. If the car remains unused for an extended period, remove the battery clamps and periodically charge the battery.

15

4

Share

How to start the Trumpchi GS8 with the key?

Method to start the Trumpchi GS8 with the key: To start the Trumpchi GS8 with one-button start, you need to carry the smart remote key with you and enter the vehicle. Press the brake pedal all the way down and keep it in that position, ensuring the start switch indicator is green. Shift the gear lever to P or N position, then press the start switch to start the engine. The Trumpchi GS8 is a mid-size SUV under GAC Motor. The dimensions of the vehicle are 4835mm in length, 1910mm in width, and 1785mm in height, with a wheelbase of 2800mm. In terms of power, the Trumpchi GS8 is equipped with a turbocharged engine, delivering a maximum horsepower of 252 hp, a maximum torque of 390 Nm, and a maximum power of 185 kW.

19

3

Share

What to Do If the Highway Toll Card Is Lost?

The solution for a lost highway toll card: The highway operating unit should first check the vehicle's entry information based on the license plate number or card serial number. If the actual entry information can be identified, the toll will be calculated based on the actual entry point. If the actual entry information cannot be identified, the toll will be calculated based on the farthest entry point within the connected toll network area. If the driver has any objections regarding the toll calculation due to a lost card or abnormal entry information, they can file a complaint with the highway operating unit or other relevant authorities within 5 days. The relevant authorities should actively conduct investigations, gather evidence, and handle the results. The entire complaint process should be completed within 7 working days from the date the highway operating unit receives the complaint.

15

1

Share

How to reset the maintenance reminder for the 2015 Ford Escort?

Method to reset the maintenance reminder for the 2015 Ford Escort: 1. With the engine turned off, press and hold the short-distance trip counter reset button located below the tachometer. 2. Turn the ignition switch to the ON position, then release the short-distance trip counter reset button. The display will show the SERVICE indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition switch back to the ON position, and the SERVICE indicator will disappear. The Ford Escort is a compact car produced by Changan Ford, with dimensions of 4587mm in length, 1825mm in width, and 1490mm in height, and a wheelbase of 2687mm. In terms of suspension, the front suspension of the Ford Escort is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.

13

2

Share

Why is there frost inside the car windshield?

The reason for frost inside the car windshield: After leaving the car, residual heat inside the vehicle keeps the glass temperature higher than the outside. If the external temperature is too low or it's snowing, the snowflakes landing on the glass will melt initially. As the interior temperature gradually drops to match the outside temperature, the melted snow on the glass begins to freeze. Once frozen, any additional snowflakes won't melt, and the moisture on the glass solidifies into ice beads, forming frost on the glass. Solutions: 1. Warm up the car sufficiently to allow the engine coolant temperature to rise; 2. Once the engine coolant temperature rises, turn on the heater and set it to blow upward toward the windshield to quickly increase the front windshield temperature; 3. When the heater melts the external frost, gently wipe the frost with a car cleaning cloth to accelerate the melting process; 4. After all the external frost has melted, use the windshield wipers to remove any water stains from the glass surface.

2

3

Share

How to adjust valves on a 4-cylinder engine?

What Causes Engine Vibration in Geely Vehicles?

Can You Start a Car While the Battery is Charging?

How to start the Trumpchi GS8 with the key?

What to Do If the Highway Toll Card Is Lost?

How to reset the maintenance reminder for the 2015 Ford Escort?

Why is there frost inside the car windshield?

What is the reason for no air coming out from the middle vents of an Audi A6's air conditioning?

Where is the headlight relay located on the Baojun 730?

Is the Baojun 530 Front-Wheel Drive or Rear-Wheel Drive?

Can vehicles undergo annual inspection in another location?