How to adjust the wiper speed slower on BMW X1?

[StEllie]

There are two modes: manual and automatic. The wiper control lever has a gear paddle in the middle and displays for gears Ⅰ, Ⅱ, and Ⅲ, allowing manual adjustment of the speed. The new BMW X1 has not undergone any exterior changes and still maintains the familiar BMW style, with the two independent circular angel eyes looking very stylish.

[LeFinley]

I encountered this issue last time when driving in light rain, and had to quickly slow down the wipers to see the road clearly. The wiper controls for the BMW X1 are mainly on the stalk to the right of the steering wheel. First, push the stalk all the way down to select the INT (intermittent) mode, then gently rotate the notched ring—twisting it toward yourself increases the speed, while twisting it outward slows it down. You’ll know it’s working when you see the wipers’ action interval lengthen. If you’re using the automatic wiper mode, which typically relies on a sensor to detect rainfall, you’ll need to enter the iDrive menu and adjust the sensitivity in the settings, such as changing it from ‘High’ to ‘Medium’ or ‘Low.’ This way, the wipers won’t swipe as frequently during light drizzles. I tried this method, and it worked well, especially in misty conditions where overactive wipers could obstruct visibility. Another tip is to double-check the settings before parking and turning off the car—some models may reset to default after restarting, so it’s best to ensure the slower wiper speed is retained for the next drive. Overall, this operation is quite simple, just a few steps to make driving more comfortable once you’re familiar with it.

[EdenLynn]

As a veteran driver with over a decade of experience, I find adjusting the wiper speed quite practical. The approach in the BMW X1 is similar to other cars I've driven: after starting the engine, locate the stalk on the steering wheel, usually marked with an INT position. Switch to that position and turn the knob toward the slower direction – gradually rotating it will show the wiper action interval lengthening, preventing loud swishing sounds during light drizzles. For automatic mode, I recommend accessing the vehicle settings through the onboard screen to adjust wiper sensitivity; setting it lower helps conserve wiper blades. The key is not to overlook regularly cleaning debris off the windshield, as trapped particles can cause wiper failure. I often advise beginners to promptly slow down wipers when transitioning from heavy rain to drizzle to avoid noise; after adjustment, test different frequency ranges to find the most comfortable rhythm, ensuring clear visibility at night. These small tips make daily commutes more hassle-free.

[VonKaden]

I often drive a BMW X1, and adjusting the wiper speed is straightforward. On the right side of the steering wheel, there's a lever; switch it to the INT position and then rotate the notched wheel knob. Turning it clockwise reduces the frequency, and you'll notice the wiper action becoming less frequent. In automatic mode, it's also simple: go to the car settings in the central control screen and lower the wiper sensor sensitivity by one level, for example, from high to medium. After this, light rain won't cause unnecessary wiping that could affect your driving mood. The whole process takes just a minute or two without any hassle.