How to adjust the windshield washer spray of Lavida?

Does the generator belt need to be replaced if it has slight cracks?

Generator belt with slight cracks needs replacement. The function of the car generator belt is power transmission. If the belt breaks, it can cause the engine to lose power and stop, and in severe cases, it may even damage the engine. Maintenance precautions for car generator belts: 1. Tightness: After driving a certain mileage, adjust the tightness of the generator belt appropriately, then fix the calibration screws as needed. The bracket screws of the generator should maintain a certain tightness. 2. Bearing wear: Pay attention to the wear level of the bearings. If insufficient lubrication is found, a few drops of oil can be added from the oil cup opening, but be careful not to let it seep into the rectifier, as this could affect power transmission efficiency. 3. Brushes: If the contact surface of the brush is uneven, it can be smoothed with fine sandpaper. If the spring lacks elasticity or the brush is excessively worn, new parts must be replaced. If the brush is too short but not damaged, a gasket can be inserted into the bracket to ensure it fits tightly with the rectifier.

1

4

Share

How to Deal with Heavy Engine Exhaust?

Heavy engine exhaust is mostly caused by a damaged three-way catalytic converter. This situation requires repairing or replacing the new three-way catalytic converter. When using the car normally, it is also necessary to add high-quality fuel as much as possible. The related introduction is as follows: 1. Heavy engine exhaust is basically caused by incomplete fuel combustion. There are many reasons for incomplete fuel combustion, including the addition of low-quality fuel, engine misfire, severe engine carbon deposits, clogged fuel lines, spark plug failure, etc. In such cases, it is necessary to immediately go to a repair shop or 4S store to ask professionals for testing and repair to avoid unnecessary trouble caused by exhaust issues during the vehicle's annual inspection. 2. The three-way catalytic converter in the vehicle is an exhaust purification device and also the most critical exhaust treatment device in the vehicle. Its key function is to convert three harmful gases (CO, HC, and NOx) in the vehicle exhaust into non-toxic and non-polluting gases (CO2, H20, and N2).

12

3

Share

What to Do If the Remote Control of the Remote-Controlled Car Is Lost?

If the car remote key is lost, the following steps can be taken: After losing the original car remote, go to the 4S store where the car was purchased. The 4S store will deactivate the original remote based on the purchase records and provide a new remote. The lost remote will no longer be able to start the vehicle, but it may still unlock the doors. For enhanced security, it is advisable to replace the entire car lock. Additional Information: Every car comes with a pre-configured anti-theft code. The owner only needs to provide the vehicle registration and identification information to the 4S store. The 4S store can then retrieve the car's anti-theft code based on the provided information and configure a new key. Additionally, the data of the lost key can be erased, rendering it invalid for starting the vehicle. However, the lost key may still unlock the doors, so the 4S store may recommend replacing the entire car lock to ensure security.

16

1

Share

Is the highest point of the wiper in the middle of the car?

The highest point is at the far right of the front windshield. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. The technical name for the wiper is 'windshield wiper,' which refers to the blade structure installed in front of the windshield. It consists of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its main purpose is to clear rain, snow, and dust that obstruct the view on the windshield. The types of wipers are as follows: 1. Traditional intermittent wipers: These are the most common wipers, with three to four segments, allowing the driver to adjust according to the intensity of rain and visibility conditions. 2. Rain-sensing wipers: These have been increasingly used in mid-to-high-end models in recent years. A good wiper must have characteristics such as heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, the ability to fit the windshield, reduce the burden on the motor, low noise, strong water repellency, and soft material to avoid scratching the windshield, ensuring clear vision.

9

2

Share

Where is the Venucia engine produced?

Dongfeng Venucia uses Nissan engines, which are joint venture assembled engines. Most of the components are produced domestically, while the engine technology and a small portion of the parts are provided by the foreign joint venture partner. Venucia engines combine the advantages of high efficiency, stability, and fuel economy, making them particularly suitable for family use with lower maintenance and repair costs. Additional information: 1. Venucia engines feature continuous variable valve timing control technology, which improves the engine's air intake and exhaust to ensure complete fuel combustion and optimal thermal efficiency. The durability and fuel economy of these engines are outstanding. 2. Adhering to the new brand slogan "Smart Living, Fun Driving," Dongfeng Venucia is committed to "creating value and enhancing well-being" as its corporate mission. It fully implements a customer-first service philosophy, striving to become a high-value automotive brand trusted by consumers. By integrating world-class advanced technology, Venucia aims to fulfill the dream of Chinese mainstream consumers for a joyful, high-quality automotive life. The Venucia logo features a blue background, symbolizing profound dreams, with the Morning Star representing the origin of Dongfeng Venucia.

10

4

Share

What is the engine configuration of the BMW X6?

The BMW X6 is equipped with 2.0T and 3.0T turbocharged engines, with model numbers B48B20 and B58B30 respectively. In the engine model designation, from left to right, the meanings are as follows: B represents the B-series engines introduced after 2013, 4 and 5 represent four-cylinder and six-cylinder configurations, 8 indicates a gasoline engine, B stands for longitudinal mounting, and 20 and 30 denote 2.0 and 3.0 displacement. Below is more information about the BMW X6: 1. The BMW X6 features a stylish and sophisticated exterior design, making it a highly performance-oriented hatchback. The most striking aspect is the BMW X6's "kidney grille" front design, which uses vertical chrome accents to perfectly blend fashion with classic elements. 2. Except for the entry-level model which uses LED high and low beam headlights, other configurations are equipped with low beam headlights + LED high beam headlights.

17

4

Share

How to adjust the windshield washer spray of Lavida?

Does the generator belt need to be replaced if it has slight cracks?

How to Deal with Heavy Engine Exhaust?

What to Do If the Remote Control of the Remote-Controlled Car Is Lost?

Is the highest point of the wiper in the middle of the car?

Where is the Venucia engine produced?

What is the engine configuration of the BMW X6?

Is it dangerous to sleep in a car with the air conditioning on?

What brand is the transmission for the tenth-generation Civic?

How to Disassemble a Buick Car Key?

What is the e300 car?