How to adjust the up and down position of the GAC GS7 steering wheel?

1 Answers
PenelopeDella
07/30/25 8:01am
The method to adjust the up and down position of the GAC GS7 steering wheel: There is a small lever directly below the steering wheel. Before adjusting, the driver must first adjust their seat height and backrest angle. After pulling the small lever, the up and down position of the steering wheel can be adjusted. The GAC GS7 is a mid-size SUV model with dimensions of 4730mm in length, 1910mm in width, and 1770mm in height, and a wheelbase of 2720mm. In terms of configuration, the automatic transmission model of the GAC GS7 is equipped with a driving mode selection system. The switch button is located at the front left of the gear lever, offering four driving modes in total: Normal, Economy, Manual, and Snow.
Was this review help?
13
2
Share
More Forum Discussions

Does the Audi A3 belong to FAW-Volkswagen Audi or SAIC Audi?

The Audi A3 belongs to FAW-Volkswagen Audi. The Audi A3 is a sedan product produced by FAW-Volkswagen Audi, developed based on the Volkswagen MQB platform. It features lightweight design and aluminum materials in its body, and is equipped with various engines such as the 1.4TFSI and 1.8TFSI. Below are the differences between SAIC Audi and FAW-Volkswagen Audi: Different joint venture manufacturers: SAIC Audi is a joint venture model co-produced by SAIC Motor Corporation Limited and Audi, while FAW-Volkswagen Audi is a joint venture model co-produced by China FAW Group Corporation and Audi. Different establishment times: SAIC Audi was established in 2016, while FAW-Volkswagen Audi was established in 1988. Different production lineups: Imported models such as the Audi A7L are produced by SAIC Audi, and future models like the A5, A8L, Q7, and Q8 will also be produced by SAIC Audi. On the other hand, FAW-Volkswagen Audi produces models such as the Audi A3, Audi A4L, Audi A6L, Audi Q3, and Audi Q5.
20
2
Share

What Transmission Does the Regal Use?

Regal transmission brand is the 9-speed HYDRA-MATIC intelligent transmission. More information about the transmission is as follows: 1. The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. 2. The manual transmission mainly consists of gears and shafts, achieving speed and torque variation through different gear combinations, requiring the driver to use shift control. 3. The automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system. It achieves speed and torque variation through hydraulic transmission and gear combinations. When the driver engages the drive gear and releases the brake, the vehicle moves slowly. 4. The 9-speed HYDRA-MATIC intelligent transmission equipped in the Regal utilizes over 60 General Motors patented technologies, including a newly designed selectable one-way clutch, torque converter, start-stop hydraulic accumulator, external TCM control module, and a coaxial design that gives it a compact size comparable to a 6AT. 6. It features a compact structure and efficient transmission. The nine forward gears have a dense and reasonable gear ratio distribution, with an overall gear ratio range reaching a broad 7.6:1. Along with the setting of two overdrive gears, it can significantly reduce engine speed during high-speed cruising, improving fuel efficiency.
12
5
Share

Can Four-Wheel Soundproofing Solve Tire Noise Issues?

Four-wheel soundproofing in cars can effectively address tire noise issues. Tire noise is generated by the friction between the tires and the road surface, and such noise is transmitted to the cabin through the vehicle's structural components. By applying damping and soundproofing materials to the vehicle, the transmission of noise through the metal panels can be significantly reduced. Below are some relevant details: Different levels of noise may occur: Due to variations in vehicle construction and assembly processes, different vehicles may exhibit varying degrees of noise. When noise occurs, it's essential to first identify its source. If the noise inside and outside the car is excessive, even the best vehicles may become uncomfortable to drive, affecting the driver's peace of mind. Therefore, solving tire noise issues can greatly enhance driving comfort, making four-wheel soundproofing an excellent solution. Soundproofing treatment: The application of damping and soundproofing materials, particularly focusing on the four-wheel support structures outside the vehicle, is recommended. For those seeking higher noise reduction effects, additional soundproofing in the trunk area can be considered. Additionally, it is advisable for car owners to maintain their vehicles properly, including rotating the tires every 10,000 kilometers and checking the four-wheel alignment every 20,000 kilometers.
18
0
Share

What are the reasons for the key light on the Haima M6 dashboard?

There are two reasons for the key light on the Haima M6 dashboard. Below are the reasons and configuration introduction for the key light on the Haima M6 dashboard: Reasons for the key light on the Haima M6 dashboard: One type without the KEY symbol is the engine anti-theft indicator light, which normally turns off after the car is started. The other type with the KEY symbol indicates insufficient battery power in the car key. It should be checked promptly to determine whether the battery needs to be replaced. Configuration introduction: The dimensions are approximately 4700mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2730mm. In terms of power, it is expected that this Haima M6 will be equipped with a 1.6L engine, with a maximum power of approximately 118 horsepower (86.5kW), paired with a 5-speed manual transmission. The powertrain adopts Haima's self-developed platform, including the 1.6-liter NG116 engine with a maximum power of about 118 horsepower; the transmission will be matched with a 5-speed manual gearbox. Additionally, a 1.5T model will be launched later, which is also Haima's first "T" powertrain technology application model.
2
2
Share

What license plate is required for Honda hybrid vehicles?

Honda hybrid vehicles require either blue or green license plates, depending on the specific type. Conventional hybrid models use standard blue plates, while plug-in hybrid models qualify for new energy vehicle plates (green plates). Strictly speaking, conventional hybrids are considered energy-efficient vehicles, sharing the same classification as traditional gasoline-powered cars. Plug-in hybrids can primarily operate using electric motors, whereas conventional hybrids rely mainly on gasoline engines. Honda is a multinational automobile manufacturer listed on the Tokyo Stock Exchange, with current product lines consisting of four major businesses: automobiles, motorcycles, power products, and aircraft.
15
0
Share

Is the Honda LFA11 Engine an Earth Dreams Engine?

Honda LFA11 engine is not an Earth Dreams engine. Earth Dreams includes Honda's 1.5-liter turbocharged engine, which is equipped in models such as the Jade, Fit, and Civic. The LFA11 engine is a 2.0-liter four-cylinder naturally aspirated engine with dual-motor hybrid technology, and it is equipped in the Honda Accord. The Honda Accord has a length, width, and height of 4930mm, 1845mm, and 1470mm respectively, with a wheelbase of 2775mm. The Honda Accord is equipped with dazzling crystal LED headlights, featuring a unique square high-grade perspective that reflects dynamic tension, with a 50% increase in illumination range compared to previous models.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.