How to adjust the time on Trumpchi GA5?

1 Answers
VonKaylee
07/30/25 2:51am
The method to adjust the time on Trumpchi GA5 is: 1. While the car is on, press and hold DISPSET for 5 seconds; 2. Rotate SEL to the 6th option CLOCK; 3. Press SEL, then rotate to adjust the hour; 4. Press SEL again, then rotate to adjust the minutes; 5. Press SEL, then rotate to EXIT to confirm. The Trumpchi GA6 has a wheelbase of 2815mm, length of 4891mm, width of 1850mm, and height of 1505mm. This model is equipped with a 1.5-liter turbocharged four-cylinder engine, which delivers a maximum power of 124 kW and a maximum torque of 265 Nm.
Was this review help?
7
5
Share
More Forum Discussions

What is the fuel consumption of the Baojun Valli?

The fuel consumption of the Baojun Valli is 6.5L/100km. Definition of fuel consumption: Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. Factors affecting vehicle fuel consumption: Different vehicles inherently have different fuel consumption levels. Generally, SUVs have higher fuel consumption than ordinary sedans. When purchasing a car, you can choose a vehicle with relatively low fuel consumption. Fuel consumption is related to engine displacement. A 1.0L displacement car typically has a fuel consumption of around 5L/100km, while a 1.5-1.6L displacement car usually consumes about 7L/100km. These are just reference values, and the actual situation depends on the specific vehicle.
13
5
Share

What is the lifespan of a Volvo engine?

Generally around 15 years, but with good quality and proper maintenance, the engine can last up to 20 years. A major overhaul is usually performed at around 100,000 kilometers to extend its service life. Function of the engine: The car engine is the device that provides power to the vehicle, serving as the heart of the car. It determines the vehicle's power, fuel efficiency, stability, and environmental friendliness. Materials used: Engine oil is the essential material for the engine and is crucial for its operation. Engine oil contains various additives that effectively protect the engine's important moving parts, ensuring normal operation.
4
5
Share

What are the symptoms of a faulty transmission computer?

Transmission computer failure symptoms include the transmission being unable to shift gears normally, rendering the vehicle undrivable. Only vehicles equipped with automatic transmissions have a TCU (Transmission Control Unit), while manual transmission vehicles do not. The TCU acts as the brain of the automatic transmission, collecting data through various sensors and controlling gear shifts via actuators after processing. There are three common types of automatic transmissions in vehicles: CVT (Continuously Variable Transmission), dual-clutch transmission, and AT (Automatic Transmission). The transmission, also known as a gearbox, is an automotive component designed to alter the speed and torque from the engine, with the capability to maintain or change the gear ratio between the output and input shafts.
11
2
Share

Does the Porsche 718 have an exhaust sound?

Porsche 718 does not have an exhaust sound, and the exhaust system needs to be modified. The following are specific details about the Porsche 718: 1. Dimensions: The Porsche 718 has a length, width, and height of 4918mm, 1983mm, and 1673mm respectively, with a wheelbase of 2895mm, a minimum ground clearance of 215mm, a fuel tank capacity of 75 liters, a trunk capacity of 648 liters, and a curb weight of 2355kg. 2. Powertrain: The Porsche 718 uses a total of three engines, which are a 3.0-liter turbocharged engine, a 2.9-liter twin-turbocharged engine, and a 4.0-liter twin-turbocharged engine. The engines are equipped with hybrid injection technology and use aluminum alloy cylinder heads and cast iron cylinder blocks.
13
1
Share

How Much Steering Wheel Turn is Needed for a Curve?

Turning requires one full rotation of the steering wheel. For tight turns at small intersections, you may need to turn the wheel one full rotation and then adjust slightly if the angle is insufficient. For easier turns at larger intersections, you can start with half a turn of the steering wheel and make minor adjustments as needed. The steering wheel is a wheel-shaped device used to control the direction of vehicles such as cars, boats, and airplanes. Its function is to convert the force applied by the driver on the wheel's edge into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam padding, and mounting clips or screw holes for the driver's airbag (DAB). Generally, for gentle curves, you should steer early and slowly, and return early and slowly. For sharp curves, steer late and quickly, and return early and quickly.
8
2
Share

What is the difference between P gear and handbrake?

P stands for Parking gear, used when parking (when turning off the engine and idling for a long time). The principle is to lock the car using the internal device of the transmission, so it must be used only when the car is completely stopped. The handbrake prevents the vehicle from sliding through the braking system. Here are some extended information: 1. The importance of P gear and handbrake: When parking, if only P gear is engaged without pulling the handbrake, parking on a slope can put a lot of pressure on the gear lock mechanism of the vehicle's transmission. In severe cases, it may cause damage or oil leakage to the transmission, and there is a high chance of the car rolling away. If only the handbrake is pulled without engaging P gear when parking, the vehicle's transmission is still in a separated state, which can also easily lead to the car rolling away. 2. Parking an automatic transmission car: When parking an automatic transmission car, it is essential to firmly pull the handbrake and then shift into P gear. P gear serves as an auxiliary brake, acting as a backup. Sometimes, if you directly shift into P gear and turn off the engine without firmly pulling the handbrake while stepping on the brake, there will be a slight impact when releasing the foot brake, especially noticeable when parked on a slope. At this point, P gear comes into play, with the lock pawl engaging with the parking lock wheel and tightly locking together, creating tension. This is also why it is often difficult to shift out of P gear; P gear can be easily disengaged only in a natural state, so the handbrake needs to be firmly pulled first.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.