How to Adjust the Time on the Toyota Corolla Central Control Display Screen?
2 Answers
To adjust the time on the car's central control display screen, follow these steps: 1. Press the left button and wait for the trip computer's time to flash, then press the right SET button; 2. Pressing SET adjusts the time once, while holding down the SET button makes the time numbers jump quickly. Use both buttons in combination to adjust the time. Below is an introduction to the car's instrument panel: 1. Function: The car's central control display screen is a device that reflects the working conditions of various vehicle systems, featuring multiple indicator or warning lights. 2. Components: It includes the coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, ABS indicator, traction control indicator, and airbag warning light.
I just helped my dad adjust the time on his Corolla a couple of days ago, and it was actually quite simple. First, start the car's ignition – note that it must be in the running state to access the settings. Then, locate the small gear-shaped settings icon on the center console screen and tap into it. Inside, there's an option called Clock Settings. After entering, first disable the automatic time synchronization feature; otherwise, the system will prevent manual adjustments. Next, you'll see the hour and minute displayed separately. Tap the hour section and use the rotary knob to adjust the number, then do the same for the minutes. Remember to press the confirm button to save the settings after adjustment, or all changes will be lost upon exiting. Here's a little tip: Before adjusting the time, check if there's a lock icon at the bottom of the screen. If present, you'll need to shift to P gear and engage the handbrake before modifying the settings. This method applies to most Corolla models from recent years.
