How to Adjust the Time on the Sagitar Dashboard?

[NorahFitz]

Steps to change the time on the Sagitar dashboard: 1. First, start the car and power it on: the dashboard will light up. Press the button on the left side of the dashboard to adjust until the hour indicator on the dashboard lights up. 2. Then press the first button on the right side of the dashboard: press once to increase the hour by one, adjust to the correct time, and release. 3. When the hour display on the dashboard stops flashing: press the button on the left side of the dashboard again to switch to the minute display flashing. 4. Press the first button on the right side again: press once to increase the minute by one, adjust to the correct time, and wait until the minute display stops flashing. The time adjustment is now complete.

[DeRemington]

Adjusting the Sagitar's dashboard clock is actually quite simple. I usually prefer to operate it with the vehicle powered on, as it's safer. First, locate the multifunction button area on the left side of the steering wheel, then press and hold the MENU or VIEW button for 2-3 seconds until the settings menu pops up on the screen. Use the directional keys to move the cursor to the clock icon, then press OK to enter adjustment mode. When the hour digits start flashing, use the up/down keys to set the current hour and confirm with OK. Repeat the same process when the minutes start flashing. For newer Sagitar models with touchscreens, it might be more convenient to adjust the time directly in the vehicle settings menu. The whole process takes just 1-2 minutes, and the changes are saved automatically without additional steps.

[VanCali]

I've been driving my Sagitar for three years and have become quite familiar with adjusting the time. It's recommended to perform this operation while the vehicle is parked, not while driving. After starting the vehicle, look at the left side of the steering wheel - the circular button with an arrow is the menu button. Briefly press it to open the menu, then use the up/down/left/right buttons to find the time and date option in the settings. When entering the time setting, press the OK button to make the hours flash, then adjust the hours using the volume or directional buttons before pressing OK to confirm. The same steps apply for adjusting the minutes. Note that some model years of Sagitar require shifting to P gear before time adjustment, and remember to press the return button to exit the menu after finishing. If you find the changes aren't saved, it might be because the operation was too fast and steps weren't completed properly.

[VanJulianna]

Adjusting the instrument panel time is not difficult. There are control buttons on the left side of the steering wheel. First, press the Menu button to bring up the menu. Use the directional keys to switch left and right to find the settings option, then enter the time setting interface. At this point, the hour digits will blink; use the up and down keys to adjust to the correct value and press OK to confirm. Next, the minutes will blink; adjust them using the same method and press OK to finalize. It's best to perform the entire operation with the engine running to prevent a power reset. Last time I helped a neighbor adjust an older Sagitar and found that models before 2018 require holding the setting button for 3 seconds to access the time menu, so keep that in mind. After adjustment, the date automatically calibrates, so no separate setting is needed.