···
Log in / Register

How to adjust the time on the new Volkswagen Magotan?

4 Answers
OliviaMarie
07/23/25 3:50pm
Here is the method to set the time on the new Magotan: 1. There is a button on the lower left and lower right corners of the instrument panel. Simply use these two buttons to quickly adjust the time. 2. The left button is the selection key—press once to adjust the hour. The right button is the adjustment key—press once to increase the value by one. Press the left button twice to adjust the minutes. Below is an introduction to the new Magotan: 1. Design: The Magotan adopts groundbreaking cutting-edge design, interpreting fashionable aesthetics with grandeur, perfectly blending design aesthetics with luxury quality. It has won numerous top international design awards, including the "Red Dot" award, known as the "Oscar of the Industrial Design World," the renowned "iF" Industrial Design Gold Award, the European Car of the Year Award, and the AUTO-BILD Golden Steering Wheel Award. 2. Technology: The Magotan has long been synonymous with "technological innovation" in China's mid-to-high-end car market. The all-new generation Magotan is equipped with a series of high-end intelligent technologies surpassing its peers. Features such as the FPK digital LCD instrument panel, third-generation ACC advanced adaptive cruise control, and a 360-degree panoramic parking system—originally exclusive to C-segment cars—are now integrated into this B-segment model, once again leading the trend in forward-thinking intelligent driving. 3. Powertrain: The entire lineup comes standard with engine start-stop and SSR2.0 second-generation brake energy recovery technology. The powertrain has been comprehensively upgraded while perfectly balancing fuel consumption, taking energy efficiency and environmental protection to the next level. The all-new generation Magotan, equipped with the advanced second-generation DCC dynamic chassis system for the first time, allows drivers to switch between comfort, standard, and sport modes, effortlessly transitioning between driving pleasure and comfort.
Was this review help?
14
0
Share
VonJade
08/10/25 11:40am
I think when adjusting the time on the Volkswagen New Magotan, you should first sit down and operate calmly, not rush like you're in a hurry. When I first drove this car, I figured it out: after turning on the ignition switch, press the 'MENU' button on the multifunction steering wheel on the right to enter the instrument panel's settings menu; then scroll to the 'Time' option, adjust the hours and minutes using the left and right buttons on the steering wheel, and finally confirm to save. The whole process takes about two minutes, which is quite convenient. I found that the automatic time synchronization can sometimes be inaccurate due to signal issues, so manual setting is more reliable. Don’t do this while driving to avoid distraction—safety first. Additionally, the central control screen can also adjust the time, but the steering wheel method is faster.
Was this review help?
5
3
Share
Expand All
LeFelicity
09/22/25 5:38am
I usually set the time for the Volkswagen New Magotan quickly, after all, driving isn't about playing with your phone. The method is simple: start the car but don't drive off, lightly press the multifunction wheel on the left side of the steering wheel, scroll into the dashboard menu, and select the 'Time Settings' section; then use the buttons to fine-tune the numbers to the exact time. This process is time-saving and effortless, easy for beginners to learn. I recommend doing it while parked, as adjusting it while driving could be extremely dangerous. By the way, inaccurate time can affect navigation displays, so adjusting it promptly can optimize the experience.
Was this review help?
9
5
Share
Expand All
EmmettFitz
11/05/25 8:58am
The first time I adjusted the time on the Volkswagen New Magotan, I was a bit confused, but I figured it out gradually. After turning on the ignition, press the settings button on the steering wheel to enter the menu; locate the 'Time' tab, then use the directional keys to adjust the minutes and hours up or down, and confirm to save—that's it. The whole process is simple and intuitive, the key is not to rush. I found that inaccurate time often comes from the battery being disconnected and resetting, so regular checks can avoid this hassle. For safety, it's best to operate while parked to prevent mistakes while driving.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

Is it allowed to temporarily park while driving a motor vehicle in a tunnel?

When driving a motor vehicle in a tunnel, temporary parking is not allowed. Motor vehicles are prohibited from parking at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. Temporary parking of motor vehicles on the road should comply with the following regulations: 1. Parking is prohibited in sections with no-parking signs or markings, sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, crosswalks, and construction areas; 2. Parking is prohibited at intersections, railway crossings, sharp turns, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations; 3. Parking is prohibited in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (posts), and within 30 meters of these locations, except when using these facilities.
5
0
Share

Why is the spare tire pressure 420?

The spare tire pressure is 420 because the tire pressure during storage should be higher than the standard upper limit, but it should be adjusted to match the standard tire pressure of the original tires when in use. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass, the tire is more prone to punctures, leading to internal cracks, blowouts, and potential tire bursts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire components, leading to excessive rolling and abnormal heat generation; Weakens the function of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire bursts; Increases tire deformation, leading to sidewall cracks, flexing movements, excessive heat, rubber aging, cord fatigue, and breakage, while also enlarging the tire's contact area and accelerating shoulder wear.
3
2
Share

What Impact Does a Driver's Safe Driving Record Have?

Querying a driver's safe driving record serves to encourage safe driving practices. Below is expanded information regarding traffic violation handling: 1. Timeframe: Vehicle owners must address violations at the local traffic police station where the violation occurred. Failure to do so within 15 days will incur a late fee of 3% per day, although the total late fee will not exceed double the original fine amount. Early resolution helps avoid unnecessary penalties. 2. Verification method: The quickest and most effective way to confirm whether you have committed a violation is to inquire at the vehicle management office or traffic police station. Essential documents to bring include your driver's license, vehicle registration certificate, and ID card—all three are mandatory. It's also advisable to carry some cash, so that if a violation is found, you can promptly complete the necessary procedures.
7
2
Share

What grade of fuel should a normal car use?

Usually, the fuel grade label is marked on the fuel tank cap. The only criterion for selecting the gasoline grade is the compression ratio of the car engine. Generally, the higher the compression ratio, the higher the gasoline grade. Typically, when the compression ratio is between 7.5-8.0, 90-93 grade gasoline should be used; for a compression ratio of 8.0-8.5, 90-93 grade gasoline is suitable; when the compression ratio is 8.5-9.0, 93-95 grade gasoline should be selected; and for a compression ratio of 9.5-10.0, 95-97 grade gasoline is recommended. The manual clearly specifies which grade of gasoline to use. There is no mistake in following the manual's instructions. Generally, the higher the compression ratio, the higher the gasoline grade. However, a high compression ratio does not entirely mean that high-grade gasoline is required. With clever engineering, high-compression engines can also use lower-grade gasoline.
18
2
Share

Which is the Brake and Which is the Accelerator in a Motor Vehicle?

In a manual transmission vehicle, there are three pedals arranged from left to right: the first is the clutch, the second is the brake, and the third is the accelerator. The left foot controls the clutch, while the right foot controls the brake and accelerator. An automatic transmission vehicle has only two pedals, arranged from left to right: the brake pedal and the accelerator pedal, both controlled solely by the right foot. The brake system consists of brake calipers and brake pads installed on the wheel hubs, with a master brake cylinder installed in the driver's compartment. Brake cylinders can be hydraulic, pneumatic, or lever-type, and operating the master brake cylinder applies braking force to the moving vehicle. The accelerator controls the fuel injection volume of the engine. When the accelerator is pressed down, a larger fuel injection increases the engine speed, thereby making the vehicle move faster.
20
3
Share

Why is the Camry's daytime running light flickering?

Possible reasons for the flickering of the Camry's daytime running light: it could be due to poor contact between the fuse and the headlight plug, or poor connection between the cathode power supply and the wiring harness with the frame. The daytime running light automatically turns on after the vehicle is started and remains lit in any position of the light switch, with no option for manual shutdown. The purpose of daytime running lights is to make the vehicle more easily recognizable during daytime driving. The Camry has a length of 4885mm, width of 1840mm, height of 1455mm, and a wheelbase of 2825mm. In terms of exterior design, the Camry features a large trapezoidal horizontal grille, a streamlined body posture with a lower waistline, an extended roofline that increases rear headroom, and a dual-sided quad-exhaust design at the rear.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.