How to Adjust the Time on the New Sylphy?

2 Answers
LaRyan
07/24/25 6:25am
Here are the steps to adjust the time on the New Sylphy: 1. Power on the vehicle, there is a button on the lower left and lower right corners of the dashboard, press the left button once; 2. The left button is the selection key, press it once to adjust the hour; 3. Press the right button on the dashboard once, the right button is the adjustment key, press it once to increase the value by one; 4. Press the left button on the dashboard twice to adjust the minutes. Additional information: The New Sylphy has a length, width, and height of 4641mm, 1815mm, and 1450mm respectively, a wheelbase of 2712mm, a front track of 1588mm, a rear track of 1594mm, and a fuel tank capacity of 47L. The engine equipped in this vehicle has a maximum horsepower of 122Ps, a maximum power of 90kW, and a maximum torque of 155Nm.
Was this review help?
8
5
Share
MilesFitz
08/11/25 2:12am
Adjusting the time on the new Sylphy is quite easy. Whenever I notice it's inaccurate, I just adjust it myself. After getting in the car, don't start the engine immediately—press the start button twice to illuminate the instrument panel. There's a multifunction button on the upper right side of the steering wheel; press it to enter the main menu. Use the directional keys to navigate to the clock settings option, where you can adjust the hours and minutes. After making the adjustments, press OK to save. An incorrect time can affect navigation accuracy, especially during long trips when map displays may deviate. Manually adjusting it gives much more peace of mind. Remember to park the car securely before operating to avoid distractions—safety is crucial. The new Sylphy's interface is quite intuitive, so it's good to check the time settings during routine maintenance to prevent issues like GPS synchronization failures. It takes just over a minute to complete—super convenient!
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What is the impact of seat height on reference points in Subject 2?

The impact of seat height on reference points in Subject 2 is mainly reflected in the timing of operations. Here are the relevant details: 1. After adjusting the seat, the reference points will change, which significantly affects Subject 2. Operations such as hill starts, right-angle turns, S-curve driving, reverse parking, and parallel parking all require reference points. Generally, if the seat is raised, the timing for each operation needs to be delayed; if the seat is lowered, the timing can be adjusted earlier. 2. It is recommended to fix a position when learning to drive and adjust it to a familiar and comfortable position during practice. At the same time, it is advisable not to rigidly memorize reference points during practice, as the feel of the exam car may differ from that of the training car, and the test site may not have markers.
6
1
Share

How Many Turns of the Steering Wheel for a U-Turn?

When making a U-turn, the steering wheel is typically turned more than 90 degrees and then adjusted to half a turn, aligning the front of the vehicle with the center of the road. Here is some related knowledge about making U-turns with a car: Wide Roads: You can use the method of making a wide turn. First, position the car slightly towards the opposite side of the U-turn, then turn on the signal light, confirm safety, and turn the steering wheel fully to complete the U-turn. Narrow Roads: Use a combination of forward and reverse movements to make the U-turn. When turning for the U-turn, as the front wheels approach the roadside or the front of the vehicle nears an obstacle, press the clutch, lightly apply the brake, and before the vehicle comes to a complete stop, quickly turn the steering wheel in the opposite direction to the maximum. Turn the front wheels to the new direction needed for reversing, then immediately bring the vehicle to a stop.
3
4
Share

Within how many kilometers should the first car maintenance be performed?

Different car manufacturers specify different maintenance intervals, generally the first maintenance is recommended at 3,000 to 5,000 kilometers or within six months. The items for the first car maintenance are as follows: Engine oil and filter replacement: The first car maintenance usually requires changing the engine oil and filter. The purpose of changing the engine oil is to ensure better lubrication for the engine, as the lubricating effect of the oil deteriorates after a period of use, hence the need for replacement. Engine inspection: Check the working condition of the engine, such as whether all pipe connections are normal, if there are any leakage points, whether the engine sounds normal during operation, and if there are any abnormal noises, etc. Brake pads and other inspections: Inspect the wear level of the brake pads and tires. After lifting the vehicle, check if there are any deformations or damages to the chassis caused by collisions or scrapes.
17
5
Share

Can a Dash Cam Use an 8GB Memory Card?

Yes, it can. Most dash cams use loop recording, where the recorded videos are stored on the memory card for a certain period, ranging from 1 minute to 3 minutes, or 5 minutes to 10 minutes. When the memory card is full, new recordings will overwrite the old video clips (except for locked videos). The advantage of this mechanism is that it prevents the dash cam from stopping recording due to insufficient storage space. However, an 8GB card has relatively small capacity. If there are no specific requirements for video quality, clip duration, or time span, an 8GB card is sufficient for daily driving. Nevertheless, it is recommended to purchase a memory card with a larger capacity. The larger the memory, the more videos can be stored, and the longer the recording time. Taking 1080P video as an example, an 8GB memory card can typically record about 60 minutes of video, while a 16GB card can record 100 minutes, a 32GB card can record 200 minutes, and a 64GB card can record 400 minutes.
12
0
Share

Does Rainy Weather Affect Vehicle Painting?

Rainy weather does have a certain impact on vehicle painting. Below is some information about vehicle painting: 1. Reason: Rainwater generally contains acidity, and acid rain can cause significant damage to the car paint, leading to oxidation of the paint surface and loss of gloss. 2. Consequences: The increased humidity after rain can affect the drying speed of freshly painted surfaces, but the moisture also reduces the amount of dust in the air, which is beneficial for painting. 3. Precautions: (1) If the car has just been painted, avoid contact with water and dust on the newly painted areas; (2) It is best not to drive the car out on rainy days, as the fresh paint is still delicate and contact with rainwater can leave marks that may be difficult to remove, even with polishing. Parking in a garage at night is recommended; (3) Sunlight is not a concern, as it only speeds up the drying process of the paint, which is beneficial; (4) Avoid exposing the newly painted areas to chemicals and oil stains.
7
5
Share

Can Old License Plates Be Used on New Cars?

Old license plates can be used on new cars. The condition that must be met is that the license plate number has been continuously used under the original owner's name for at least one year, and it will automatically be retained for one year. The following are relevant matters to note regarding the use of old license plates on new cars: 1. Situations where legal entities cannot inherit: If the original owner is a unit (company), after the vehicle is transferred, the license plate is retained under the name of the unit (company), not under the name of the company's legal representative. The legal representative has no right to inherit it. 2. Situations where natural persons cannot inherit: If the vehicle undergoes a transfer of marital property, and the license plate is transferred from one spouse to the other, it must be used under the new owner's name for at least one year before it can be retained. Even if the original owner passes away, the license plate number is not included in the inheritance. 3. Archiving period: After the old license plate is transferred, it cannot be used immediately; there is typically a 3-business-day archiving period.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.