How to Adjust the Time on the Excelle?

2 Answers
SanCora
08/28/25 2:25am
Method to adjust the time on the Excelle: 1. Turn on the radio, and when the time is displayed, press and hold the clock button on the right; 2. Press the H button on the left to adjust the hour, and press the M button to adjust the minutes. Taking the 2021 Excelle Automatic Light Hybrid Base Model as an example, it is a compact car under SAIC-GM Buick, with body dimensions of length 4609mm, width 1798mm, height 1486mm, and a wheelbase of 2640mm. The 2021 Excelle Automatic Light Hybrid Base Model is equipped with a 1.3L turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum horsepower of 163PS.
Was this review help?
5
2
Share
OZoey
09/09/25 7:49am
I've always driven an Excelle, and adjusting the time is quite simple but involves key details. First, after starting the car, don't drive off—ensure safety. Locate the MODE button on the steering wheel or the SETTINGS icon on the central display and press it. Then navigate to the CLOCK or TIME SETTING option. Use the small knob or touchscreen to select the hour section, rotate to adjust to the correct number, and do the same for the minutes. After confirming, press the OK button to save. Stay focused throughout the process and avoid distracted driving. I've noticed that incorrect time can affect navigation positioning, such as causing location offsets when using CarPlay. Every year when daylight saving time comes around, I make sure to adjust it. If the new system update causes confusion, a reset might be needed: turn off the engine and start over. Keeping the time accurate is crucial for travel planning.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Can motorcycles go on highways in Guangdong?

Motorcycles can go on highways in Guangdong, but they are not allowed to carry passengers. Legal basis: Article 27 of the "Guangdong Province Road Traffic Safety Regulations" states that vehicles should drive in their respective lanes as prescribed. Low-speed trucks, three-wheeled vehicles, tractors, and motorcycles should drive in the far-right lane. On highways and urban expressways with two lanes in the same direction, trucks are not allowed to enter the left lane except when overtaking. On roads with three or more lanes in the same direction, trucks are not allowed to enter the far-left lane. Roads with two or more motor vehicle lanes in the same direction may have dedicated lanes. Dedicated lanes can be designated for small passenger cars, buses, motorcycles, etc. Article 34 states that low-speed trucks, three-wheeled vehicles, and tractors are not allowed to enter highways or urban expressways, nor are they allowed to travel on roads in the central urban areas of large and medium-sized cities. Other roads restricting tractor traffic shall be designated by municipal governments at the prefecture level or above based on local conditions and reported to the provincial government for approval.
10
4
Share

What documents are required for motorcycle inspection?

Here are the materials required for motorcycle annual inspection: Copy of compulsory insurance: One of the preparations for vehicle inspection is to check the validity period of the compulsory insurance that includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance to avoid delaying the inspection. Documents: ID card of the owner or agent, original driving license, and road and bridge card. Legal basis for annual inspection: Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates that motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration: motorcycles within 4 years shall be inspected once every 2 years; those over 4 years shall be inspected once a year. National regulations: Motor vehicles must regularly pass exhaust emission tests, vehicle appearance, lights, brakes, chassis, and other inspections, and obtain an inspection qualification mark without any violation records. All annual inspection dates are based on the date registered on the driving license. Motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration, generally referred to as "annual inspection" or "annual review."
14
1
Share

How to switch Toyota tripa?

Toyota tripa is switched by pressing the small rod-shaped button on the right side of the instrument panel, located below the speedometer. Here is more information about the instrument panel: 1. Basic components: tachometer, turn signal indicator, coolant temperature gauge, fuel level, speedometer with odometer, adjustment and test button, indicator lights or driver information system, trip odometer reset button. 2. Indicator lights: EPC (Engine Power Control) system indicator, exhaust monitoring system indicator, ESP (Electronic Stability Program) indicator, generator fault indicator, Audi A3 seat belt indicator, fuel tank system warning indicator.
15
1
Share

How to adjust the time and date on a 2007 Audi A6L?

Audi A6L time needs to be adjusted on the MMI control panel. Here is some relevant information about the Audi A6L: 1. Interior: The new Audi A6L's interior adheres to the "wrap-around" design concept, crafted with near-demanding standards to achieve "best-in-class," where nobility and refinement are self-evident. The instrument panel and door trim together outline graceful curves, embracing both the driver and passengers. 2. Management System: Audi's innovative intelligent thermal management system optimally distributes the heat generated by the engine among the engine, transmission, and cabin. Integrated into the engine control unit, the intelligent thermal management system can make real-time adjustments based on engine conditions and environmental variables (such as ambient temperature, air conditioning system settings, etc.).
9
0
Share

What are the vision requirements for a C1 driver's license?

For the C1 driver's license physical examination, the naked vision or corrected vision of both eyes must reach above 4.9 on the logarithmic visual acuity chart. Below is relevant information about the C1 driver's license: 1. License code: C1. 2. Permitted vehicle types: Small and micro passenger vehicles, as well as light and micro cargo vehicles, light, small, and micro special-purpose vehicles. 3. Other permitted vehicle types: C2, C3. 4. Requirements for examination vehicles: Light ordinary cargo vehicles with a length of no less than 5 meters, or small ordinary passenger vehicles with a length of no less than 4 meters, or cars with a length of no less than 4 meters.
10
4
Share

What are the differences between KYB shock absorbers in blue, yellow, and black?

KYB's black shock absorbers are replacement parts for original equipment, and their tuning style is very similar to the original shocks. The yellow shock absorbers are short-stroke shocks, which must be used with shorter springs. KYB's yellow shock absorbers can lower the vehicle height. The blue shock absorbers are stiffer and provide better support, but they do not lower the vehicle height. If you want to use blue shock absorbers, they can be paired with the original springs. Below is some relevant information about shock absorbers: 1. The function of shock absorbers: To improve the wheel's contact with the ground, thereby enhancing traction. Better traction can improve both handling and safety. 2. Composition: Shock absorbers consist of a shock tube and a spring. The spring is the elastic element, and the shock tube provides damping.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.