···
Log in / Register

How to adjust the time on the Besturn B50?

3 Answers
VonAbigail
07/29/25 11:31pm
The steps to adjust the time on the Besturn B50 are: First, turn on the audio switch, then press and hold the CLOCK button below the CD player (for about 3 seconds). The hour part of the time will start blinking. Rotate the knob at the switch to adjust the hour. Then, press and hold the same button again, and the minute display will start blinking. Rotate the adjustment knob to set the minutes. Once adjusted, press the CLOCK button once to return to normal. The Besturn B50 is a compact car with dimensions of 4695mm in length, 1795mm in width, and 1460mm in height, and a wheelbase of 2725mm. It features a double-wishbone independent front suspension with a stabilizer bar and a multi-link independent rear suspension. The drive system is front-engine, front-wheel drive.
Was this review help?
19
4
Share
DelJourney
08/16/25 2:21am
I remember adjusting the time on the Besturn B50 is actually quite simple, having driven this car for several years. Generally, after starting the car, look at the small screen in the middle of the dashboard where the time is displayed. You need to locate the control button area on the left side of the steering wheel, where there's a button marked 'SET' or 'Settings'. Press and hold it for a few seconds to enter the adjustment mode. At this point, the time on the screen will start flashing, and you can use the '+' or '-' buttons to adjust the hours and minutes. Press the 'OK' button to save after confirmation. If there are no buttons on the dashboard, some older models have a clock setting menu on the center console. Inaccurate time might affect your trip planning. I usually check it once a month, along with fuel level and tire pressure, to ensure a safer and more convenient drive.
Was this review help?
19
0
Share
Expand All
VonJason
10/19/25 2:29am
Adjusting the time on the Besturn B50 is not difficult, as I've done it multiple times myself. First, start the vehicle and locate the multifunction button group on the right side of the steering wheel, usually featuring a 'MENU' key. Press it to enter the system settings interface. Then select the 'Clock Settings' option, use the directional keys to move the cursor to the hour position, and press the adjustment button to modify the number. The same steps apply for minutes. Once done, simply click confirm. Newer models might be more intuitive, allowing direct operation via the touchscreen. Remember to adjust the time when the car is stationary to avoid distracted driving. Precise timekeeping is crucial for daily commutes, such as avoiding speeding or being late. Details may vary across different model years, so consulting the manual or visiting a dealership is advisable for certainty.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

What Are the New Technologies in Automotive Detailing?

Automotive detailing new technology is film application. The following are specific introductions to the benefits of automotive glass film: 1. Heat and Sun Protection: The film can effectively block a large amount of heat generated by infrared rays. 2. UV Protection: Medium and long waves in ultraviolet rays can penetrate thick glass, but applying a heat-insulating film can block most UV rays, preventing skin damage and reducing the aging of car interiors. 3. Safety and Explosion Protection: The base layer of the film is made of polyester, which has excellent tear and puncture resistance. Combined with the adhesive layer of the film, the strength of the glass after film application can prevent injuries to drivers and passengers caused by accidental glass breakage.
20
1
Share

What Does a Friction Clutch Consist Of?

A friction clutch consists of four main parts: the driving part, the driven part, the pressing mechanism, and the operating mechanism. The driving part, driven part, and pressing mechanism are the fundamental structures that ensure the clutch remains engaged and transmits power, while the operating mechanism is primarily the device used to disengage the clutch. The working principle of a friction clutch is as follows: 1. The engine flywheel serves as the driving component of the clutch, while the driven disc with friction linings and the driven hub are connected to the driven shaft via sliding splines; 2. The pressing spring forces the driven disc against the flywheel's end face; 3. The greater the pressing force of the spring, the larger the torque the clutch can transmit.
12
2
Share

How long does it take to fully charge a dead car battery with a charger?

A dead car battery typically takes 10 to 12 hours to fully charge with a charger. The reasons for a dead car battery include: 1. Prolonged vehicle inactivity leading to battery discharge; 2. Battery reaching the end of its service life; 3. Engine damage; 4. Insufficient battery electrolyte or leakage; 5. Blown fuse causing battery power loss; 6. Corrosion of battery terminals. Battery maintenance methods include: 1. Avoid overusing the battery; 2. Regularly clean the positive and negative terminals; 3. Periodically check the vent holes on non-maintenance-free battery covers to prevent clogging; 4. Avoid low battery water levels.
16
2
Share

Why is the car air conditioning pipe cold but the air outlet not cold?

Car air conditioning air outlet is not cold because the fuse has been burned out or the air outlet switch is not connected properly, resulting in a short circuit. The following is relevant information: 1. Car air conditioning: Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing the driver's fatigue and improving driving safety. 2. Composition: Car air conditioning generally includes refrigeration devices, heating devices and ventilation devices. This combined device makes full use of the limited space inside the car, with a simple structure and easy operation, and is currently the internationally popular modern car air conditioning system.
18
2
Share

What is the P with Signal Button in a Car?

The button with a P and signal in a car is the reverse radar switch. The full name of the reverse radar is the reverse anti-collision radar. Here is a detailed introduction to the P with signal in a car: 1. Composition: It consists of ultrasonic sensors (commonly known as probes), a controller, and a display (or buzzer). 2. Function: It informs the driver about surrounding obstacles through sound or a more intuitive display, eliminating the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle. It also helps the driver overcome blind spots and unclear vision, improving driving safety. The reverse radar is also known as the parking assistance system or the reverse computer warning system.
18
1
Share

What is the fuel consumption of the 8th generation Honda Civic?

This car has a fuel consumption of 7.9 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When the car starts at low speed, it is the peak fuel consumption period. Therefore, lightly pressing the accelerator during startup and preventing excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.