How to adjust the time on Jinbei vehicles?

1 Answers
AliceLynn
07/29/25 5:21pm
Method to adjust the time on Jinbei vehicles: After turning on the Jinbei vehicle, the CLK button is used to display and set the time. Press and hold CLK for about 5 seconds until the time display starts flashing on the screen. Then adjust the hours and minutes separately. Turning the button to the left decreases the value, and turning it to the right increases it. After adjusting to the correct time, press the CLK button again to confirm. The Jinbei 750 has a body length, width, and height of 4560mm, 1790mm, and 179mm respectively, with a wheelbase of 2725mm. The vehicle is front-wheel drive, equipped with a 1.5L naturally aspirated engine paired with a 5-speed manual transmission. This engine delivers a maximum power of 82kW and a maximum torque of 147Nm.
Was this review help?
19
3
Share
More Forum Discussions

How to Connect the Positive and Negative Terminals When Jump-Starting a Car?

Method for connecting the positive and negative terminals when jump-starting a car: Connect the positive terminals of both car batteries together, and then connect the negative terminals. Below are precautions for jump-starting a car: 1. During use: Connect the positive terminal first when jump-starting, and disconnect the negative terminal first when finished. 2. When starting: If the car fails to start, listen for sounds. If you hear a warning sound, it indicates insufficient battery power. If there is still a cranking sound from the engine, it might be another issue. 3. If unable to start: If the car still fails to start after a prolonged jump-start, check if the two car batteries have the same power capacity, and consider using a cable with better conductivity.
18
5
Share

How many points are deducted for going straight and turning?

Turning left from a straight lane deducts 3 points and incurs a fine. According to the "Scoring Standards for Road Traffic Safety Violations," Article 3: If a motor vehicle driver commits any of the following violations, 3 points will be deducted: Point 8: Driving a motor vehicle in violation of prohibition signs or prohibition markings. Below is additional information: Vehicle driving precautions: Maintain a safe following distance. According to relevant tests, when braking suddenly at a speed of 100 km/h, even the best car requires nearly 40 meters of braking distance. Even if the speed in urban areas does not reach 100 km/h, it is still impossible to guarantee that the vehicle can come to a complete stop immediately under normal driving conditions.
7
0
Share

Does rainy weather affect car painting?

Painting a car on a rainy day does not have much impact as long as the paint has completely dried. Here are some precautions for car painting: 1. Check the spraying pressure: Before painting, ensure the spraying pressure is normal and the filtration system is clean. 2. Inspect the painting tools: Check the air compressor and oil paint waterproof micro-dust separator to keep the paint hose clean. 3. Maintain cleanliness in the paint booth: Only painting and baking processes should be carried out in the paint booth. The booth door should only be opened when vehicles enter or exit, and the air circulation system must be activated during spraying to create positive pressure, preventing external dust from entering the booth.
4
3
Share

What does S grade mean?

S is the abbreviation of 'super', meaning 'super; top-grade', representing the highest level in grading. When classifying levels, S, A, B, C, D, E are commonly used to indicate the hierarchy of levels. Except for S representing 'super', the rest follow alphabetical order to denote the level hierarchy, i.e., S>A>B>C>D>E. Here is additional information: A itself represents 'excellent, outstanding', and the levels descend accordingly with B, C, D. B is the abbreviation of 'good', meaning 'very good'; C is the abbreviation of 'cool', meaning 'quite good, cool, etc.'; D is the abbreviation of 'dull', meaning 'slow'; S is the abbreviation of 'super', meaning 'extremely powerful'.
1
4
Share

What Causes Brake Pedal Pulsation?

Brake pedal pulsation can occur due to the following reasons: 1. Uneven brake drum: The pulsation may be caused by an uneven brake drum or brake disc. Another possibility is the presence of air in the brake lines. For safety reasons, it is advisable to have the brake system inspected at a repair shop. 2. ABS protection: When braking hard in an emergency, the pulsation of the brake pedal is the ABS system functioning to protect the vehicle. In an emergency, the driver may slam on the brakes to control speed and avoid danger. However, if the braking system locks up suddenly, it could lead to a loss of lateral control of the vehicle.
20
0
Share

How to adjust the time on the Peugeot 408 small screen?

Peugeot 408 small screen time adjustment steps are as follows: 1. Enter the original vehicle settings in the navigation settings, press the MENU item, and then click the OK button. 2. Use the up and down keys to scroll through the options, and the flashing values for year, month, day, hour, and minute will appear respectively. 3. Use the left and right keys to adjust the numbers for any incorrect values, and click OK to complete the adjustment. Notes: 1. The time displayed on the car dashboard is only an auxiliary function and does not have high precision. 2. The adjusted time may gradually become faster or slower. As long as you master the adjustment method, you can adjust it at any time when errors occur.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.