How to Adjust the Time on Hyundai Verna?
3 Answers
Modern Verna's method of changing the time is as follows: 1. Turn the key to the ACC position and hold down the CLOCK button for a few seconds. 2. Enter the time adjustment mode. Rotate the knob on the right to adjust the hour, then press the knob once to switch to adjusting the minutes. 3. After adjustment, press the knob on the right to confirm. More information about the Hyundai Verna is as follows: 1. The Hyundai Verna is a model jointly designed and developed by Beijing Hyundai, Hyundai North America, and the European Design Center. It features smooth line designs with a focus on a fashionable style, targeting young consumers. 2. The Hyundai Verna has a length, width, and height of 4340mm/1700mm/1460mm, with a wheelbase of 2570mm.
To adjust the time on a Hyundai Verna, look for the clock display position on the center console or the left side of the steering wheel. There are usually two buttons marked H and M, which stand for hour and minute. First, press the H button, and when the numbers start flashing, press H again to adjust the hour—each press increases the number by one. The same goes for minutes: press M to make it flash, then press M to adjust the minutes. After adjusting, wait a few seconds, and it will save automatically. My 2016 Verna requires resetting the time every time the battery is replaced. After the last maintenance, I noticed a RESET button next to the light switch—holding it down resets the clock system, which is especially useful when the date gets messed up. Remember to adjust the time only when parked, as doing so while driving can be distracting and unsafe. If you can't find the buttons, check the user manual in the glove compartment—manufacturers usually mark the exact operation location. Don’t press the MENU button on the audio unit, as it only adjusts audio settings and won’t affect the time display.
Last time I drove a Hyundai Verna, I noticed the time was off by half an hour, so I immediately pulled over to adjust it. Look for the clock button on the center control panel below the left side of the steering wheel. Press and hold the H button for a few seconds until the hour starts flashing, then release and tap H to adjust the hour. For minutes, press and hold M and then tap to adjust. I once encountered a situation where pressing the buttons didn't work—turns out the ignition needs to be turned to the ON position. If the time keeps resetting to zero after adjustment, it might be due to loose battery terminals causing a power interruption. Just have a mechanic tighten the screws. It's best to wear gloves when doing this yourself, as pressing those small buttons with your nails can easily scratch the panel surface. This design is much more convenient than the older models, where you had to poke a small hole in the instrument cluster to adjust the time.
