How to adjust the time on Hyundai Verna?

How to Replace the Fuel Filter on a Great Wall M4?

Steps to replace the fuel filter on a Great Wall M4: 1. Park the vehicle on a solid, level surface. 2. Reduce the fuel system pressure. 3. Start the engine and let it run until the fuel in the lines is depleted and the engine stops. 4. Remove the mounting bolts of the fuel filter, then take out the old fuel filter. 5. Install the new fuel filter, ensuring the correct orientation (it should point toward the engine). Once confirmed, secure the fuel filter with the mounting bolts. 6. Reconnect the fuel lines and install the fuel pump fuse. 7. Reconnect the battery. Additional information about the Great Wall M4: 1. Exterior dimensions: With a ground clearance of 185mm and larger tire size, its off-road capability is evident. For consumers who desire an SUV but are concerned about urban parking difficulties, the compact Great Wall M4 could be an ideal compromise. 2. Performance: The Great Wall M4 is equipped with a self-developed 1.5L VVT all-aluminum engine, widely used across multiple Great Wall models. Its reliability is well-established, and the 78kW and 139Nm output is more than sufficient for this small vehicle. Four-wheel disc brakes are uncommon in this segment, and the rear semi-independent torsion beam suspension aligns well with the M4's positioning. 3. Features and configurations: The top-tier Great Wall M4 offers an MP5+GPS+rearview camera system, SD card slot with map card, 4 rear parking sensors, automatic climate control, power sunroof, heated front seats, heated and defrosting side mirrors, and more—making it both feature-rich and practical.

20

4

Share

Reasons for the Engine Warning Light in the 2020 New Bora?

Sensor issues, car maintenance problems, fuel quality problems, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust problems, and anti-theft system malfunctions are the main causes of the engine warning light turning on. Additionally, when the car is started, the vehicle performs a self-check on the engine system. Normally, the engine warning light will turn off after the self-check is completed. If it remains on for an extended period, you should promptly seek professional help at a repair station to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor problems: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to turn on. In such cases, you should promptly visit a repair center for professional diagnosis and elimination of safety hazards. Maintenance issues: Poor engine maintenance is the most common cause of the engine warning light turning on. Vehicles have a certain maintenance cycle. If maintenance is not performed on schedule, coupled with poor driving habits, the burden on the engine will increase, and eventually, the engine warning light will turn on to alert the owner of a fault. Fuel quality issues: This includes both fuel and engine oil. The fuel added to a car usually has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers generally recommend which grade of fuel and type of engine oil to use. If the owner does not follow these recommendations, long-term use can cause engine wear, and the warning light will turn on. Always use the recommended fuel grade and engine oil for your vehicle. Poor combustion of the air-fuel mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion of the air-fuel mixture in the engine. Poor combustion leads to engine carbon buildup or knocking, which is detected by the engine's oxygen sensor and reported to the ECU, triggering the warning light. Intake problems: The engine requires air for combustion, and the air filter plays a crucial role in this process. If the car's air filter is dirty or not cleaned regularly, it can affect the engine's air intake. Over time, this can lead to blockages and, in severe cases, cause the engine warning light to turn on. Turbocharging issues: Problems with the intake turbocharging pipeline or turbocharger can also cause the engine warning light to turn on. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust problems: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the engine warning light. The most common issue is a faulty catalytic converter. Factors such as using leaded gasoline, lead- or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily cause catalytic converter failure. Anti-theft system: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine warning light will turn on. There are two scenarios when the engine warning light turns on: one is a yellow light, indicating a warning that certain system parameters may be out of range. The car can still be driven, but some functions may be limited. The other is a red light, which means the car must be stopped immediately, the engine turned off, and driving prohibited until the fault is checked. Solutions for the engine warning light: If the engine warning light turns on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance. If the engine warning light turns on and the car can still be driven but exhibits severe shaking or loss of acceleration, pull over and call for roadside assistance. If the engine warning light turns on but there are no noticeable driving issues, it may be due to a faulty sensor. In this case, you can continue driving at low speeds but should visit a repair shop as soon as possible to eliminate safety hazards.

19

4

Share

How to Determine if the Car Body is Straight in Subject Two?

Here are the specific methods to determine if the car body is straight in Subject Two: 1. Sit upright with eyes looking straight ahead: If the line of sight is parallel to the lane edge line, the car body is straight; if the line of sight intersects with the lane edge line, the car body is tilted. 2. Observe the rearview mirrors: While driving, not only look ahead but also check the side mirrors. On roads with markings, you can observe whether the vehicle is driving in the middle through the rearview mirrors. 3. Look at the windshield washer nozzles: Check if the windshield washer nozzles are level with your line of sight, or choose a reference object to compare with the car body to see if it is straight.

6

5

Share

What does the 3363+16 fault code mean?

3363+16 fault code indicates that the Catalyst 1 Tank Heater Circuit is too high. 1. Causes: Coolant pipe direction reversed, tank heater control valve reversed, aftertreatment fluid level temperature sensor reversed; tank heating valve stuck open; incorrect heating valve model used. 2. Solutions: Check whether the coolant pipe, tank heater control valve and aftertreatment fluid level temperature sensor are reversed; perform "Diesel Engine Urea Injection System Heater Test" to check if the tank heating valve is functioning properly. If blockage or mechanical failure is found, repair or replace the heating valve. Check whether the tank heating valve model matches the ECM model.

3

4

Share

What brand is the tank car?

tank is an automotive brand under Great Wall Motors. Exterior: The new vehicle measures 5437/1958/1893 (1918) mm in length/width/height with a wheelbase of 3230mm. The cargo bed interior dimensions are 1520/1520/538mm. The body side features curved wheel arches that protrude significantly outward, accommodating oversized off-road tires. Interior: The Great Wall Pao off-road version adopts a black-red dual-tone scheme with stitching and diamond-pattern elements. The dashboard is equipped with a large central LCD screen paired with rectangular air vents, creating a harmonious overall design.

2

3

Share

Where to Apply for a Replacement Motor Vehicle Driver's License?

To apply for a replacement motor vehicle driver's license, you need to visit the local Vehicle Management Office. Below are the relevant details for replacing a driver's license: 1. Applying for a replacement in a different location: After losing a motor vehicle driver's license, the driver does not need to apply for a replacement at the place where the license was originally issued. They can apply for a replacement at any regional Vehicle Management Office. 2. Driving is prohibited during the loss period: Drivers must carry their motor vehicle driver's license when driving. Otherwise, it will be treated as driving without a license. Upon discovering the loss of the driver's license, the driver should carry the relevant documents and apply for a replacement as soon as possible.

16

0

Share

How to adjust the time on Hyundai Verna?

How to Replace the Fuel Filter on a Great Wall M4?

Reasons for the Engine Warning Light in the 2020 New Bora?

How to Determine if the Car Body is Straight in Subject Two?

What does the 3363+16 fault code mean?

What brand is the tank car?

Where to Apply for a Replacement Motor Vehicle Driver's License?

What is the transmission of the Tiguan L?

Is the Lavida's Fuel Consumption High?

How to Open a Ford Mondeo Key?

Where is the coolant drain port on the Passat?