How to adjust the time on Honda CR-V?

2 Answers
DeIsabella
07/24/25 3:49am
Honda CR-V time adjustment method is as follows: 1. Turn off the ignition switch, then rotate the light switch to turn on the parking lights. 2. Press and hold the instrument button for a while, the hour zone on the instrument panel will start flashing, then release the button. 3. Press the button again, each press increases by one hour. After adjusting the hour, do not touch the button. 4. After flashing 5 times, it will automatically switch to minute adjustment. Use the same method to adjust the minutes. Below is some information about the Honda CR-V: 1. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. It features a sporty and fashionable design with excellent handling performance. 2. In terms of exterior, the new Honda CR-V adopts Honda's latest family design language, with a more rugged styling. The large chrome grille is eye-catching, and the sharp LED headlights on both sides connect seamlessly with the grille. The front face incorporates many three-dimensional lines. The rear retains the controversial but very sexy "fat butt" design from the previous generation, but also adds rugged lines, giving it an overall stable feel. The C-shaped LED taillights perform well in terms of both design and visibility when lit. 3. The interior of the new Honda CR-V has become more refined and includes many technological elements. The cabin uses soft plastic materials extensively, and the passenger seat features leather wrapping, aiming to close the gap with mainstream competitors in terms of materials. 4. In terms of power, the new Honda CR-V is equipped with a 1.5T turbocharged engine, delivering a maximum power of 142kW/5600rpm and a maximum torque of 243Nm/2000-5000rpm, paired with a CVT continuously variable transmission.
Was this review help?
15
5
Share
LaCourtney
08/10/25 11:24pm
I frequently study the various functional details of the Honda CRV, and setting the time is quite straightforward. You need to start the engine or power on first, then locate the settings button on the center console; for newer models, you might find the clock option by tapping the vehicle settings icon on the touchscreen homepage. Older CRV models often have a physical CLOCK button near the steering wheel or dashboard—press it, and the time digits will blink. Use the directional keys or knob to adjust the hour, then the minutes, and finally press the OK button to save and exit. Ensure safety during the process and avoid fiddling with it while driving. I've noticed slight variations across different model years—for instance, post-2017 models rely more on screen menus. A quick glance at the manual beforehand can save time from randomly pressing buttons. Overall, the steps are simple and can be done in a minute once you're familiar. Remember to periodically check the time accuracy to prevent navigation system issues—I've tried it multiple times without errors.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How to open the fuel tank of a Jeep Compass?

Method to open the fuel tank of a Jeep Compass: Lift the metal fuel tank cover, insert the key into the fuel tank cap, turn the key to the right to grip the fuel cap's rotating knob, then turn it to the left to open the fuel cap. Hang the plastic cord on the cap onto the hook of the metal cover. Generally, there are three ways to open the fuel tank cap for household cars: using a key, an interior switch, or direct pressing. The mechanical key method is more complicated, so it's rarely used in household cars nowadays. The more common method now is having an interior switch button, which is more convenient compared to the mechanical key method. The Jeep Compass is a young compact SUV in the Jeep family. In terms of body dimensions, the Jeep Compass measures 4448mm in length, 1812mm in width, and 1663mm in height.
17
0
Share

What engine does the Geely Emgrand GL have?

The Geely Emgrand GL is equipped with two types of engines: a 1.8L naturally aspirated engine and a 1.3T turbocharged engine, paired with a 6-speed manual transmission and a 6-speed dual-clutch transmission respectively. The 1.3T turbocharged engine delivers a maximum power of 98 kW and a peak torque of 185 Nm. The Geely Emgrand GL is the fourth model of Geely's premium 3.0 generation and is classified as an A+ segment sedan. In terms of body dimensions, it measures 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. For the interior, the Emgrand GL features an aviation-inspired wraparound cockpit design and the brand's signature arched bridge instrument panel. The center console adopts a layered design, offering a clean, sophisticated, and well-structured appearance.
2
4
Share

What is the correct method for washing a car?

There are many things to pay attention to when washing a car. Here is an introduction to the car washing method: Car washing method: Spray the pre-wash car shampoo on the car body. After soaking, most of the sand and dirt can be separated from the car paint. Then rinse with a water gun to avoid scratches on the paint surface caused by sand and mud during washing. Also, follow a top-down sequence when washing the car. Do not use cold water to wash the car, choose the correct car shampoo, etc. Precautions: Do not wash the car under strong sunlight, as this will leave dried water drop marks on the car body, seriously affecting the post-wash results. Whether you wash the car yourself or go to a car wash shop, avoid washing the car in direct sunlight. Do not use water other than soft water for cleaning, including hot water, alkaline water, and water with high hardness, as these substances can damage the paint. Washing with hard water will leave marks and a film on the car surface after drying.
1
2
Share

How to use the automatic parking feature on Audi A6?

Audi A6L's automatic parking button is the 'A' button next to the electronic handbrake on the center console. Once activated, when the vehicle comes to a stop with the brakes applied, releasing the brake requires pressing the accelerator for the vehicle to move, ensuring it doesn't roll back on slopes. Below are detailed explanations about the automatic parking system: 1. The automatic parking system replaces the function of the handbrake. When stopping at traffic lights, there's no need to pull the handbrake. This feature is particularly useful on slopes and during frequent starts and stops. 2. Its working principle is the same as the mechanical handbrake, both achieving parking control through the friction generated between the brake disc and brake pads, but the control method changes from a mechanical handbrake lever to an electronic button. 3. The automatic parking system provides a more relaxed driving experience and also reduces wear caused by frequent pressing of the accelerator and brake.
20
1
Share

How to Check the Vehicle Emission Standard (National Standard Level)?

Methods to check the vehicle emission standard (National Standard level) are as follows: 1. Check the vehicle's environmental protection label, which usually has clear markings on the back. 2. Visit the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center to inquire. 3. Bring the vehicle registration certificate (original or copy) to the local vehicle management office for inquiry. 4. For new vehicles, refer to the vehicle's factory qualification certificate. Generally, the qualification certificate is kept at the vehicle management office, so it's advisable to make a copy when purchasing a new vehicle. 5. Make a rough estimation based on the vehicle's registration year. Most vehicles registered after 2008 are National Standard IV; vehicles registered in 2007 could be National Standard III or IV; vehicles registered before 2007 are mostly below National Standard IV, meaning National Standard III or II; vehicles registered before 2005 are mostly National Standard II.
13
1
Share

How to Determine if a Car Air Conditioning Compressor is Faulty?

Methods to determine if a car air conditioning compressor is faulty: 1. If the pipeline has not been disassembled, start the car and maintain the engine speed at 2000 RPM. Open the area where the compressor is installed and grasp the exhaust pipe (there are only two pipes, the thinnest one) with your hand. If it feels very hot, it indicates that the compressor can compress, meaning the compressor is functioning properly. Otherwise, it can be judged as faulty. Before performing this step, be sure to check whether the AC switch or the thermostat switch is turned on. You can also observe whether the compressor's clutch plate is engaged. 2. If the pipeline has already been disassembled, it is even easier to determine. Start the car and turn on the compressor switch. Use your thumb to press against the exhaust pipe. If the exhaust pipe has high pressure and cannot be pressed down, it indicates normal function. If it can be pressed down, it means the compressor's compression ability has declined and needs replacement. Note that this test method should not be performed for too long, as the compressor is running without refrigerant.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.