How to adjust the time on Honda City?

1 Answers
DeLevi
07/30/25 12:27am
Honda City time adjustment method is: 1. Press the menu button on the dashboard to select time setting; 2. Enter the time adjustment interface, when the time starts flashing, adjust the numbers by rotating the button; 3. After adjustment is completed, press the OK button. The body dimensions of Honda City are: length 4450mm, width 1695mm, height 1477mm, fuel tank capacity is 45L, and trunk capacity is 536L. Honda City is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum horsepower of 131PS, maximum torque of 155Nm, and maximum power of 96kW.
Was this review help?
4
2
Share
More Forum Discussions

At What Temperature Does Weather Affect Car Paint?

Temperature above 40 degrees Celsius can affect car paint. Types of Car Paint: Standard Paint: Standard paint is the most common type of automotive paint, characterized by low cost and simple application process. However, it has relatively poor gloss and surface hardness, making it particularly prone to scratches. Therefore, it is rarely used in passenger cars nowadays, and when it is used, it is typically found in lower-end models. It is most commonly used in trucks and buses. Metallic Paint: Metallic paint is created by adding aluminum powder to standard paint, resulting in a shiny appearance. The main feature of metallic paint is not just its high brightness, but also its significantly higher hardness compared to standard paint. It is resistant to scratches from ordinary objects, which is why it is widely used in cars, especially high-end models. Pearlescent Paint: Pearlescent paint uses mica instead of aluminum particles. The paint base contains mica pigments coated with titanium dioxide and iron oxide. When light hits the mica particles, it first takes on the color of titanium dioxide and iron oxide, then undergoes complex refraction and interference within the mica particles.
1
3
Share

Does replacing the antenna with a shark fin have any impact?

Replacing the antenna with a shark fin has no impact, but if the shark fin is not chosen properly, it can easily disrupt the vehicle's aerodynamic design. Non-original shark fins are prone to fading after exposure to wind and sun, which can result in a noticeable color difference with the car body. If you want to change to a shark fin antenna, it is recommended to consult a professional at an auto parts store to see if your car can be fitted with one. Shark Fin Antenna: The shark fin car antenna product utilizes internationally advanced electronic technology. Compared to traditional telescopic antennas, rod antennas, and car glass antennas, the shark fin car antenna boasts a stylish, dynamic, and eye-catching appearance. It integrates powerful automotive electronic functions such as FM, GPS, and GSM, effectively combining "fashion" with "functionality" to achieve perfection. Function of the Shark Fin Antenna: The shark fin design helps to split and divert airflow, reducing wind resistance to a certain extent, which in turn significantly lowers fuel consumption, especially at high speeds where this feature is particularly important. Reducing wind resistance can also contribute to fuel savings and noise reduction.
9
3
Share

Is the LED headlight modification for Geely Emgrand GS bright?

Modifying the headlights of the Geely Emgrand GS to LED is brighter than the original headlights. LED headlights refer to car lights that use LEDs (Light Emitting Diodes) as the light source. Because LEDs have the characteristics of high brightness, rich color variety, low power consumption, and long lifespan, they are widely used in the automotive field. LED license plate lights are installed above or on both sides of the rear license plate of the car to illuminate the rear license plate, with a power generally ranging from 1-2W, ensuring that pedestrians can clearly see the text and numbers on the license plate from 20 meters behind the vehicle. LED reverse lights are installed at the rear of the car and automatically light up when the transmission is in reverse gear, illuminating the rear side of the car while warning pedestrians and vehicles behind to pay attention to safety. The power is generally 2-5W, with white light. Brake lights, commonly known as 'LED brake lights,' are installed at the rear of the car. They emit strong red light when the brake pedal is pressed to indicate braking. The power is 2-5W, with red light, and the lens display area is larger than that of the rear position lights. To avoid the danger of large vehicles colliding with sedans from behind, a high-mounted brake light (LED light strip) composed of rows of LEDs can be installed inside the rear window of the sedan.
11
0
Share

What faults will occur if the transmission wiring harness is damaged?

Damage to the automotive transmission wiring harness can cause issues such as poor contact, signal interruption, open circuits, and short circuits to ground. Once the transmission control unit detects these problems, it will "activate emergency mode," also known as "gear lock." After the gear is locked, symptoms may include gear shifting impact, weak acceleration, inability to drive at high speeds, high engine RPM with low vehicle speed, and significantly increased fuel consumption. Transmission Wiring Harness: It is the main network of the automotive electrical system. Without the wiring harness, there would be no automotive circuits. The transmission wiring harness typically consists of contact terminals (connectors) made from stamped copper material, crimped to wires and cables, and then covered with molded insulators or additional metal casings. These components are bundled together to form a circuit connection assembly. Transmission: It is a gearbox that changes the transmission ratio and the direction of motion. Located between the clutch and the central drive, its main functions are: to alter the vehicle's driving force and speed (gear shifting) without changing the engine's RPM and torque; to allow the vehicle to reverse (direction change); and to enable the engine to remain running while the vehicle is stationary (neutral gear).
17
0
Share

Reasons for High Oil Temperature in BMW 525?

If the engine oil temperature is too high, you can replace the oil cooler, as the high oil temperature may be caused by poor performance of the oil cooler. Once the oil temperature becomes excessively high, it must be repaired immediately; otherwise, it will affect the normal operation of the engine. Engine oil is often referred to as the lifeblood of the engine. Without it, the engine cannot function properly. During engine operation, the oil forms a protective film on the surfaces of various components, preventing friction and heat generation between them. In fact, engine oil serves multiple purposes beyond lubrication, including cleaning, sealing, cushioning, rust prevention, and heat dissipation. Over time, the performance of engine oil deteriorates, so it needs to be replaced regularly. It is recommended to adhere to scheduled oil changes during routine vehicle use. Each time you change the oil, the oil filter should also be replaced. The oil filter is designed to purify the oil. Without it, the oil would become contaminated after some use, negatively impacting engine performance. When purchasing an oil filter, always opt for genuine products from reputable brands. Low-quality oil filters cannot effectively filter the oil. Long-term use of inferior oil filters can also impair engine performance. During an oil change, ensure all the old oil is completely drained before adding new oil.
16
5
Share

Can Pawnshops Accept Cars?

Vehicles can be pawned. Business scope of pawnshops: Real estate pawning, motor vehicle pawning, personal item pawning (diamonds, luxury watches and jade, digital luxury goods, etc.), as well as consulting, appraisal and evaluation services. Pawnbroking: Also known as "pawnshop" or "pledge shop". It was an institution in old China that accepted items as collateral and provided usurious loans. Throughout Chinese history, pawnbroking had various names, such as "quality treasury", "solution treasury", "pawn shop", "long-life treasury", etc. China's earliest pawnbroking industry appeared in the Northern and Southern Dynasties, with the earliest records of pawning found in "The Book of Later Han. Biography of Liu Yu": "Yu's rewards were pawned to the Hu barbarians." In old China, pawnshops mostly accepted movable property such as clothing as collateral, providing cash loans at a discount based on the value of the collateral provided by the borrower, with regular repayment of principal and interest. If the collateral could not be redeemed upon maturity, it would be confiscated by the pawnshop. Some pawnshops also accepted real estate as collateral.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.