How to adjust the time on Excelle?

What brand are the original tires for the Mercedes-Benz GLA200?

Mercedes-Benz GLA tires are from the Bridgestone brand. The Mercedes-Benz GLA uses tires with the size 235/45/R19. Below is relevant information: 1. Tire width: This is a factor that affects the vehicle's fuel consumption performance. The wider the tire, the larger the contact area with the ground, which increases the friction between the tire and the ground. The energy lost as the vehicle's kinetic energy is converted into frictional heat will increase, meaning wider tires consume more fuel over the same distance. 2. Aspect ratio: This is a major factor influencing the vehicle's responsiveness to the road. Vehicles with a lower aspect ratio have thinner sidewalls and greater tire pressure, making them highly responsive to the road. This allows them to quickly transmit road signals to the driver, enhancing control, and is commonly found in performance-oriented models.

16

3

Share

What are the drawbacks of filler-free dent repair?

The drawbacks of filler-free dent repair are that it requires a higher level of technical skill. If the technique is not up to standard, it may result in uneven surfaces or even thinning of the original material. Additionally, it is expensive and suitable only for niche vehicle models. Some vehicles with aluminum alloy bodies cannot use this repair technique. Below is a detailed introduction to automotive dent repair: 1. Introduction: Automotive dent repair involves restoring the dented parts of a car's paint surface to their original condition. Generally, this method can effectively repair dents with sharp or obtuse angles. Dents without paint damage can often be restored to their original state, including hail damage, though edges and AB pillars are more difficult to repair. 2. Traditional metal sheet repair: Metal sheet repair involves restoring deformed parts of a car's metal body, such as dents caused by collisions. The process reshapes the metal to its original form, followed by applying specialized paint to restore the surface to a smooth, glossy finish, matching the undamaged areas.

8

1

Share

How often should a car be started if not driven?

A car that has been parked for one to two months without being driven needs to be started. Below are some methods for maintaining the car battery: 1. In-car electricity usage: To maintain the car battery, avoid listening to the radio loudly, charging your phone, or using an air pump when the engine is off. Doing so for extended periods can easily drain the battery, and frequent battery drainage will significantly reduce its lifespan. 2. Long-distance highway driving: Regularly driving on highways not only helps remove carbon deposits from the vehicle but also fully charges the battery. Generally, driving on the highway for more than an hour will fully charge the car battery, keeping it in optimal condition. 3. Avoid prolonged inactivity: If the car is not used for an extended period, the battery cable should be disconnected, or the vehicle should be started and driven for several dozen kilometers every two weeks to ensure the battery remains functional. 4. High-power electrical connections: Many car appliances nowadays, such as car refrigerators, vacuum cleaners, and air pumps, have very high instantaneous power. Avoid directly powering these devices with the car battery. Instead, start the vehicle first and then connect the electrical appliances.

5

4

Share

What Causes a Car to Fail to Start on Rainy Days?

On rainy days, a car failing to start is usually due to short circuits caused by damp electrical circuits. Here are other reasons why a car might not start: 1. Carbon buildup in the engine: If the car idles with slight shaking, cleaning the throttle body and fuel injectors can resolve the issue. 2. Weak spark plug ignition: If spark plugs are not replaced after their maintenance cycle, their ignition energy weakens, leading to misfires in severe cases. 3. Insufficient fuel pressure: Low pressure in the fuel system can cause the engine to require a second ignition. Check components such as the fuel pressure regulator, fuel pump, fuel filter, and internal fuel lines. 4. Dead battery: In this case, jump-starting the car with another vehicle or battery is necessary.

15

5

Share

Can the Parking Air Conditioner Be Used While Driving?

The air conditioner that comes with the original engine when it starts is the driving air conditioner, which is used during the vehicle's operation. Here is some relevant information about car air conditioners: 1. Introduction: The car air conditioning device is referred to as the car air conditioner. 2. Function: It is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to the optimal state, providing passengers with a comfortable riding environment and reducing travel fatigue; it also creates good working conditions for the driver and plays an important role in ensuring safe driving as a ventilation device. 3. Components: It generally includes a refrigeration unit, a heating unit, and a ventilation unit. This combined device makes full use of the limited space inside the car, has a simple structure, and is easy to operate, making it a popular modern car air conditioning system internationally.

13

3

Share

How to Add Urea to a Diesel Vehicle?

In diesel vehicles, there is a separate urea filling port. Simply open the port and add the urea. The most basic function of automotive urea solution is to convert nitrogen oxides in vehicle exhaust into harmless nitrogen and water, which is energy-saving and environmentally friendly, enabling the vehicle to meet the national exhaust emission standards. Below is an introduction to automotive urea: 1. Origin: Automotive urea solution was first used in Europe, where it is called AdBlue. In North America, it is referred to as DEF (Diesel Exhaust Fluid), and in China, it is known as automotive urea solution or "automotive denitrification agent." However, it is now generally referred to as "automotive urea" in China. 2. Function: Automotive urea solution is crucial for reducing pollutant emissions from diesel vehicles. It is a urea-based chemical reactant, composed of high-purity urea and deionized water, forming a solution with a concentration of 32.5%. The application of automotive urea solution in the SCR system is key to ensuring that engine exhaust emissions meet the National IV and higher emission standards.

20

4

Share

How to adjust the time on Excelle?

What brand are the original tires for the Mercedes-Benz GLA200?

What are the drawbacks of filler-free dent repair?

How often should a car be started if not driven?

What Causes a Car to Fail to Start on Rainy Days?

Can the Parking Air Conditioner Be Used While Driving?

How to Add Urea to a Diesel Vehicle?

What Causes Water to Come Out of a Car's Exhaust Pipe?

How Much Oil Should Be Added to the Equipment Transmission?

What does D+- mean in automatic transmission?

Will the car hit the wall if turning the steering wheel fully to the left while the right side is close to the wall?