How to adjust the time on Dongfeng Peugeot 308?

2 Answers
SanDaniel
07/24/25 12:53pm
Dongfeng Peugeot 308 time adjustment method: 1. Press and hold the adjustment lever for more than two seconds until the hour flashes to adjust; 2. Quickly press and release the adjustment lever, each press increases the hour by one; 3. After setting the hour, wait until the minutes start flashing, then press and hold the lever to adjust the minutes in the same way. The Dongfeng Peugeot 308 is a compact sedan. The first-generation Peugeot 308 model was equipped with a 120-horsepower 1.6L inline 4-cylinder gasoline engine transplanted from the 207 model, paired with 215/55R16 Michelin tires. In terms of body dimensions, the Peugeot 308 measures 4558mm in length, 1805mm in width, and 1505mm in height, with a wheelbase of 2612mm.
Was this review help?
14
3
Share
TylerMarie
08/11/25 6:57am
When I first drove the 308, I didn't know how to adjust the time either, but I figured it out later. There's a small control stalk on the left side of the steering wheel and a menu button on the center console. After turning on the car's power, press the menu button to enter the settings interface. Use the scroll wheel on the left side of the steering wheel to select the time setting option and press it to confirm. At this point, the hour digits on the screen will flash. Use the scroll wheel to adjust to the correct hour by turning it up or down, then press the scroll wheel again to switch to minutes. Adjust the minutes using the same method. Don't forget to press the scroll wheel to confirm and save after adjusting! The older 308 models had two small buttons in the middle of the instrument panel for direct adjustment, while the newer models have integrated this function into the steering wheel. It's recommended to do this while parked, as it can be distracting while driving.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What type of engine oil does the Toyota Sienna use?

Toyota Sienna uses 5W30 engine oil, which complies with China IV plus OBD emission standards. The Toyota Sienna is a five-seat MPV under the Toyota brand, with dimensions of 5085mm in length, 1984mm in width, and 1796mm in height. Its wheelbase is 3030mm, front and rear track is 1720mm, and minimum ground clearance is 164mm. The Toyota Sienna is equipped with three engine options: a 2.7L naturally aspirated engine, a 3.3L naturally aspirated engine, and a 3.5L naturally aspirated engine. The main configuration differences between the standard and luxury versions of the Toyota Sienna include power sliding doors, roof rails, multifunction steering wheel, chrome mirrors, and front power seat adjustment.
16
4
Share

Where is the Tank's Fuel Tank Located?

Tank's fuel tank is located on the left side of the vehicle. Methods to identify the fuel tank position of a car: On the dashboard, there is a fuel refill icon. If the triangle on the right side of the fuel tank points to the right, it indicates that the fuel tank cap is on the right side of the vehicle; if it points to the left, it means the fuel tank cap is on the left side of the vehicle. Methods to check fuel tank capacity: Drive the car until the fuel gauge shows only one or two bars remaining, and there is a gas station nearby. You can continue driving until the fuel warning light comes on, then go to the gas station and ask the attendant to fill it up. This way, you can estimate the approximate capacity of the fuel tank.
18
1
Share

How to Reverse a Manual Transmission Car?

Manual transmission car reversing method: Depress the clutch and shift into R gear, release the foot brake and handbrake, slowly lift the clutch. Note that during the entire reversing process, do not fully release the clutch, as this can effectively control the speed. Generally, unless going downhill, you don't need to use the brake - the clutch alone is sufficient for speed control. If reversing to the right, turn the steering wheel right; if reversing to the left, turn it left. When you see the car entering the parking space straight, straighten the steering wheel. Before parking in a parking space, first visually estimate the width of the space, check for any obstacles behind, whether there are cars parked on both sides, and if the length suits your vehicle model. If visibility is poor at night, step out to observe the exact position before reversing.
20
0
Share

Where is the key induction for Zotye T600?

Zotye T600's key induction is located in the center armrest storage box. You can see it by prying up the left outer handle cover with the key. In terms of interior, the Zotye T600 adopts a simple style, featuring a floating central control screen that enhances the sense of technology. The vehicle is equipped with one-key start, keyless entry, electronic parking, reversing camera, full LCD instrument panel, automatic air conditioning, and body stability system, along with added mobile phone connectivity and intelligent voice control. For the powertrain, the Zotye T600 is powered by 1.5T and 1.8T engines, delivering maximum horsepower of 140ps and 177ps, and peak torque of 207nm and 245nm respectively. In terms of transmission, the 1.5T model comes with a 5-speed manual or 6AT gearbox, while the 1.8T model is paired with a dual-clutch transmission.
16
4
Share

What is the vehicle used for towing called?

The vehicle used for towing is called a wrecker, also known as a tow truck or recovery vehicle. It consists of a chassis, lifting device, towing and pulling device, hydraulic system, electronic control system, body, and tool compartment, among other components. It has multiple functions such as lifting, pulling, and towing, making it suitable for clearing obstacles on highways and urban roads. It is primarily used for dealing with broken-down vehicles on the road, urban traffic violations, and emergency rescue operations. Here is some relevant information about wreckers: Introduction: A wrecker is a specialized vehicle equipped with road rescue operation equipment. Since vehicle breakdowns and accidents are inevitable while driving, especially on highways, such incidents occur frequently. Task: The primary task of a wrecker is to promptly remove broken-down or accident vehicles from the scene to ensure smooth traffic flow. Therefore, wreckers are also known as road rescue vehicles. With the increase in high-grade roads and the number of vehicles in use, wreckers have also seen development.
3
2
Share

Is a Water Temperature of 100 Degrees Normal in Summer?

Generally, the normal operating temperature range for most passenger vehicles is between 80°C and 105°C. Concept: The car radiator, also known as the heat exchanger, is a key component in the vehicle's cooling system. Its function is to dissipate heat. Coolant absorbs heat in the water jacket, flows to the radiator to release that heat, then returns to the water jacket to complete the cycle, thereby regulating temperature. It forms an integral part of the automobile engine. Working Principle: The radiator serves as a crucial element in water-cooled engines, being a vital component of the engine's cooling circuit. It absorbs heat from the cylinder block to prevent engine overheating. Due to water's high specific heat capacity, the temperature increase after absorbing cylinder block heat remains relatively moderate. Thus, the engine's heat is transferred through this liquid cooling circuit.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.