How to adjust the time on a Toyota Camry?

1 Answers
VanJason
07/29/25 10:00pm
Camry 19 model dashboard time adjustment method: 1. Turn the key to the ACC position or remove it, the dashboard will turn off. 2. Turn the light switch to turn on the small lights. 3. At this time, the dashboard background light will also light up. 4. Press and hold the dashboard button for a while, the hour area on the dashboard will start flashing, release the button and press it again, each press increases the hour by one. 5. After adjusting the hour, do not touch the button, the hour will flash 5 times and then automatically switch to minutes. Each press of the button increases the minute by one, holding it down will continuously increase. After adjustment, do not touch it, the minute count will flash 5 times and then stop, the time is now adjusted.
Was this review help?
3
2
Share
More Forum Discussions

Does the new Jetta have an anti-collision beam?

The new Jetta does not have a rear anti-collision beam, but it is equipped with a front anti-collision beam. The anti-collision beam is a U-shaped channel made of cold-rolled steel plate, connected to the longitudinal beams of the vehicle frame. As the first line of defense in passive safety, the anti-collision beam is an important safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. In terms of power, the new Jetta offers two gasoline engine options: a 1.4L and a 1.5L. The 1.4L engine delivers a maximum power of 66kW and a maximum torque of 132Nm, while the 1.5L engine produces a maximum power of 80kW and a maximum torque of 150Nm.
13
5
Share

How to Deal with Rusty Car Doors?

Methods to handle rusty car doors: 1. If the rust appears on the surface and covers a small area, you can use water sandpaper to grind off the rust and then spray a layer of anti-rust paint; 2. If the rust has damaged the primer, the rust must be ground off, followed by primer spraying, and then topcoat spraying; 3. If the door is severely rusted with large areas of paint peeling, the rusted paint must be completely removed, followed by filling and leveling with putty. After the putty hardens, proceed with repainting; 4. If the door is rusted through, repair is generally not recommended as the effect is limited, and rust may reappear after some time. It is more advisable to replace the door. It is recommended to replace the door at a 4S shop, as they use original factory parts. Many 4S shops do not allow the use of aftermarket parts for vehicle repairs, whereas external repair shops typically use aftermarket parts.
1
1
Share

Is the BYD e6 a pure electric vehicle?

BYD e6 is a pure electric vehicle. The BYD E6 is a pure electric crossover independently developed by BYD, combining the design concepts of SUVs and MPVs, making it a high-performance crossover. The dimensions of this vehicle are 4560mm in length, 1822mm in width, and 1630mm in height, with a wheelbase of 2830mm. The BYD e6 is a single-motor model, with the motor delivering a maximum power of 120kW and a maximum torque of 450Nm. A major highlight of the BYD e6 is its electric drive system, which uses BYD's self-developed and produced ETPOWER iron batteries for both the power battery and the starting battery. These batteries pose no harm to the environment, as all the chemical substances they contain can be decomposed and absorbed by nature in a harmless manner, effectively addressing environmental issues such as secondary recycling. They are truly green and eco-friendly batteries.
12
1
Share

Does the 2012 Mercedes-Benz E300L have four-wheel drive?

2012 Mercedes-Benz E300L does not have four-wheel drive. This model adopts a front-engine, rear-wheel-drive layout, with a slightly raised floor in the rear passenger area due to the space occupied by the driveshaft. The Mercedes-Benz E300L is a mid-to-large-size sedan launched by Mercedes-Benz, positioned above the Mercedes-Benz C-Class but below the Mercedes-Benz S-Class. The 2012 Mercedes-Benz E300L is equipped with an adaptive suspension system, which is standard on the long-wheelbase E-Class models. This system automatically adjusts damping and suspension settings based on driving conditions to ensure comfort and stability. In terms of body dimensions, the 2012 Mercedes-Benz E300L measures 5012mm in length, 1855mm in width, and 1464mm in height.
10
4
Share

Do You Need to Press the Clutch When Applying the Handbrake?

Applying the handbrake does not require pressing the clutch. The handbrake, also known as the parking brake, functions to provide resistance to the car when parked, preventing it from rolling. The parking brake, whether it's a handbrake or the parking gear in an automatic transmission, locks the drive shaft or rear wheels. Its braking force is much weaker compared to the service brake, just enough to prevent the car from rolling on a slope. Parking brakes come in different types, including mechanical systems operated by hand or foot, as well as electronically controlled parking systems, commonly known as electronic parking brakes. An electronic parking brake integrates the temporary braking function during driving with the long-term braking function after parking, and it achieves parking braking through electronic control technology.
11
1
Share

Can You Keep Driving When the Car Radiator Boils Over?

You should not continue driving when the car radiator boils over. Upon noticing the boiling, first pull over to the side of the road but do not immediately turn off the engine. There are various reasons that can cause a car radiator to boil over, though typically only one specific issue is at play each time. If you shut down all other functions, the water temperature may remain excessively high, potentially damaging the engine. The correct approach is to idle the engine, open the hood, turn on the heater to dissipate heat as quickly as possible, and ensure the car is parked in a shaded area. Next, the owner should check if the coolant level is sufficient. This situation often arises from the owner neglecting to top up the coolant regularly. It is crucial to use the same brand and model of coolant when refilling, as mixing different types may cause chemical reactions that render the antifreeze ineffective. Additionally, a coolant leak could be the reason for the low level. In such cases, the owner should thoroughly inspect for any leaks and have them repaired promptly.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.