How to adjust the time on a Roewe 350?

1 Answers
SanAsher
07/30/25 3:21am
To adjust the time on a Roewe 350: Press and hold the INFO button until the time format is displayed, then press the confirm button. When the hour format of the clock flashes, use the SEEK plus or SEEK minus button to adjust the hour, then press the confirm button. When the minute format flashes, use the SEEK plus or SEEK minus button to adjust the minutes. After both the hour and minute are correctly set, press and hold the confirm button to finish. The Roewe 350 is a compact sedan produced by SAIC Motor, with body dimensions of 4521mm in length, 1788mm in width, and 1492mm in height, a wheelbase of 2650mm, a front suspension type of MacPherson independent suspension, and a rear suspension type of H-shaped torsion beam non-independent suspension.
Was this review help?
4
4
Share
More Forum Discussions

Why is the rear bumper of the Envision discolored?

The discoloration of the rear bumper on the Envision may be due to daily driving scratches or small areas of discoloration that existed before purchasing the car. Simple solution: If the paint on the bumper is scratched and the damage is not severe or deep, you can purchase a touch-up paint pen online to repair it yourself, as this is about all you can do on your own. Apply original paint: You can visit a 4S store or a professional repair center specializing in your car brand. If they happen to be painting cars at the time, ask the painter for some original paint and apply it to the scratched area yourself. Apply stickers: Choose a sticker you like and apply it over the scratched area. This not only covers the damaged spot but also adds aesthetic appeal to your beloved car.
8
4
Share

Is the Mercedes-Benz R350 a full-time four-wheel drive?

Mercedes-Benz R350 is a full-time four-wheel drive. Introduction to four-wheel drive systems: There are three common four-wheel drive systems in cars, namely full-time four-wheel drive system, part-time four-wheel drive system, and on-demand four-wheel drive system. Introduction to full-time four-wheel drive system: All four wheels have power at all times. Some cars have very intelligent full-time four-wheel drive systems, which can distribute torque to all four wheels. Advantages of full-time four-wheel drive: Full-time four-wheel drive is the transmission method with the highest cornering limit on highways. It can distribute the optimal driving force to each wheel during high-speed cornering. Therefore, this technology is widely used in large-displacement sedans that emphasize handling performance, with the main purpose of improving effective driving force and cornering limits.
10
1
Share

What causes the BMW X5 fan to keep running?

BMW X5 fan keeps running may be caused by high engine temperature; poor fan cooling; or component failure in the fan control system, such as sensor failure, module failure, etc. Summer rotation speed: In summer, when the ambient temperature is higher, the electric fan needs to operate at a higher speed to dissipate the heat generated by the radiator compared to other seasons. When the air conditioning is turned on, the electric fan is required to operate. When the water temperature continues to rise, the fan needs to operate at an even higher speed to ensure normal air conditioning cooling and engine operating temperature, making the electric fan noise naturally louder. Caused by thermostat failure: Due to the thermostat, the temperature reaches the baseline but cannot send water to the radiator, or the water sent is too little, causing the engine to overheat and the electric fan to keep running.
8
0
Share

Does the BMW X2 not have cruise control?

The BMW X2 is equipped with cruise control, and the cruise control buttons are located on the left side of the multifunction steering wheel. Control adjustments: When the vehicle reaches a certain speed, press the button in the upper right corner to activate cruise control; the LIM button is the speed limit switch, which can set the maximum cruising speed; the middle roller can be used to adjust the vehicle speed. Function of cruise control: It is mainly used to control the vehicle's constant speed driving. After cruise control is activated, the vehicle will drive at the speed set by the driver, automatically maintaining the speed without the need to press the accelerator pedal, allowing the vehicle to travel at a fixed speed; in addition, speed adjustment, function pause, or cancellation can be achieved by adjusting the control switch.
7
2
Share

Why is the BMW 3 Series one-button start unresponsive after a power outage?

BMW 3 Series one-button start unresponsive after a power outage may be caused by a dead key fob battery, the gear not being in P position, etc. Dead smart key battery: When the vehicle's smart key battery is dead, the key's transmission power is very low, making it difficult for the in-car sensor to detect it. At this time, the one-button start cannot complete ignition. Solution: Generally, smart keys come with a mechanical key that can be directly inserted into the keyhole for starting. Gear not in P position: For automatic transmission vehicles (AT, CVT, AMT), the manufacturer will state in the manual: Ensure the gear is in P position when starting. Imagine if the vehicle could be started directly in D or R gear—the sudden movement of the vehicle during ignition would undoubtedly pose a significant safety hazard.
15
5
Share

Where is the drain valve for the antifreeze in Chery Fengyun 2?

The water filler port of the Chery Fengyun 2 radiator is located at the antifreeze reservoir cap in the upper left corner of the engine compartment. Antifreeze is a coolant containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year. Vehicle antifreeze generally needs to be replaced every 2 years or 40,000 kilometers, which is just a reference interval. For commercial vehicles with longer mileage, the replacement cycle is shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Check the antifreeze's condition; if it is found to be insufficient, replenish it promptly. If suspended matter, sediment, or signs of deterioration or discoloration are observed in the antifreeze, replace it immediately and clean the system. How to determine if antifreeze is lacking: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to insufficient antifreeze, although it could also be caused by excessively high cylinder temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level scale markings on the antifreeze reservoir. The antifreeze level should normally be between the maximum and minimum marks. Whether antifreeze is lacking depends on the scale. If the antifreeze is below the minimum mark, it indicates a shortage.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.