How to Adjust the Time on a Fit?

How to Calculate Fuel Consumption per Kilometer for a Vehicle?

Calculating a car's fuel consumption involves determining the fuel consumption per 100 kilometers, which is the parameter provided by manufacturers. This is done by dividing the actual fuel consumption by the actual distance traveled. The calculation formula is: fuel consumption per 100 kilometers equals fuel consumption (liters) divided by distance traveled (kilometers) multiplied by 100. Introduction to vehicle fuel consumption: Fuel consumption refers to the fuel economy indicator of a car traveling at a constant speed on good road conditions. The fuel consumption per 100 kilometers is the theoretical indicator of a vehicle's fuel consumption when traveling a hundred kilometers at a certain speed on the road. Calculating fuel consumption: The fuel consumption per 100 kilometers is a value measured by manufacturers under objective conditions using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then traveling at specified speeds to calculate the theoretical experimental fuel consumption per 100 kilometers for the vehicle model.

20

0

Share

Is the Highway Free During the Mid-Autumn Festival?

Highways are not free during the Mid-Autumn Festival. Normally, highways are toll-free during four national statutory holidays: the Spring Festival, Qingming Festival, Labor Day, and National Day, as well as other statutory holidays or consecutive rest days determined by the State Council. For example, highways remained toll-free throughout the pandemic in 2020. Below are the relevant details: The vehicle types eligible for toll-free passage are determined by the vehicle type specified on the vehicle registration certificate. Eligible vehicles include micro buses, sedans, small buses, small off-road vehicles with seven seats or fewer, and motorcycles permitted on ordinary toll roads. However, micro trucks, light trucks, and special-purpose vehicles are excluded.

14

4

Share

What does the M gear on an automatic transmission mean?

Here is an introduction to the meaning of the M gear on an automatic transmission: 1. The M gear is the manual mode of the transmission. After shifting to the M gear, you can manually control the upshifting and downshifting of the transmission, but this manual mode does not require stepping on the clutch, and the engine will not stall, which is different from manual transmission vehicles. 2. The main function of this manual mode is to allow you to control the transmission yourself. For example, some cars may have slower automatic transmission efficiency during low-speed starts, and you can use manual control in such cases. The following three driving situations can be switched to the manual mode M gear: 1. When climbing a long and steep slope, the manual mode allows you to shift to 1st gear for climbing, which can limit the vehicle to low-gear driving. Unlike the automatic D gear, which frequently shifts, this method provides more power for climbing and also protects the transmission. 2. When descending a long slope, driving in a low gear can help control the speed without constantly stepping on the brakes. 3. When accelerating to overtake, switching to manual mode and downshifting first can utilize the high torque of the low gear for instant acceleration, allowing you to complete the overtaking maneuver more quickly.

1

4

Share

How many kilometers does a car need to run before changing tires?

Car tires need to be replaced after running 30,000 to 50,000 kilometers, and the replacement time can be determined based on road conditions and mileage. The functions of tires are: 1. To transmit driving force, braking force, and steering force through the tires to achieve vehicle operation. 2. To support vehicle load. 3. To reduce and absorb the vibration and impact force during driving, avoiding severe vibrations that may damage car components. The maintenance methods for tires are: 1. Regularly clean stones stuck in the tire treads. 2. Reduce exposure of tires to direct sunlight. 3. Promptly check tire pressure. 4. Pay attention to the maintenance of the suspension system. 5. Regularly check front wheel alignment. 6. Be mindful of driving habits, choose smooth roads to drive on, avoid objects that can puncture or scratch tires, and steer clear of chemical spills that may corrode the tires.

9

5

Share

How to Use Rearview Mirrors When Driving in an S-Curve?

When driving in an S-curve, the method for using rearview mirrors is as follows: 1. When the left front edge of the car aligns with the right line of the S-curve, turn the steering wheel one full turn to the left. 2. Observe the left rearview mirror to ensure the distance between the car body and the left line remains approximately 30 cm. 3. At the curve junction, straighten the steering wheel and then check the right rearview mirror to maintain a distance of about 30 cm between the car body and the right line. Car rearview mirrors are categorized into: 1. Left-side rearview mirror. 2. Right-side rearview mirror. 3. Central rearview mirror. As crucial safety components, car rearview mirrors serve the purpose of allowing drivers to indirectly observe conditions behind, beside, and below the vehicle, thereby expanding the driver's field of vision.

18

0

Share

How Often Should Car Antifreeze Be Replaced?

For vehicles that operate for extended periods, such as taxis, high-quality antifreeze generally needs to be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. Long-life antifreeze can have a validity period of up to three years. Method for Replacing Antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leaks or cracks in the pipelines, with a focus on the five-way hose. The five-way hose gets its name from having five connection points to various parts. Antifreeze flows through the five-way hose and is then distributed to different parts of the car to function. If there are signs of antifreeze leakage in this section, replace the hose or resecure the connections as needed. Drain the old antifreeze, then flush the fluid channels with clean water. Add clean water to the antifreeze reservoir and continue filling until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Continue adding clean water until clear water flows out. Note: Do not forget to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new antifreeze through the radiator hose—this ensures the antifreeze flows quickly into the radiator. Then, add another container of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the system. Top up the antifreeze until it reaches the "MAXT" mark on the reservoir.

6

0

Share

How to Adjust the Time on a Fit?

How to Calculate Fuel Consumption per Kilometer for a Vehicle?

Is the Highway Free During the Mid-Autumn Festival?

What does the M gear on an automatic transmission mean?

How many kilometers does a car need to run before changing tires?

How to Use Rearview Mirrors When Driving in an S-Curve?

How Often Should Car Antifreeze Be Replaced?

How Often Should Car Coolant Be Replaced?

How Many Days of Practice Does a Beginner Need to Become Proficient on the Road?

What Type of Vehicle Has a Green License Plate?

What is the optimal temperature for car air conditioning in winter?