How to Adjust the Time on a City?
4 Answers
The method to adjust the time on a City is as follows: 1. Turn the car key to power on the vehicle. 2. The dashboard lights up, indicating the vehicle is powered on. 3. Press and hold the time adjustment button for a long time. 4. The hour display will start flashing. 5. Press the time adjustment button to increase the hour by one each time. 6. After a few seconds, the minute display will start flashing. 7. Press the time adjustment button to increase the minute by one each time. Extension: Taking the 2019 City as an example, its body dimensions are: length 4450mm, width 1695mm, height 1477mm, wheelbase 2600mm, minimum ground clearance 100mm, and body weight 1078kg.
I used to drive a Honda City, and adjusting the time was actually quite easy with a few multifunction buttons on the steering wheel. I remember first starting the car but not driving off, then pressing the info button on the left side of the dashboard to bring up the settings menu on the screen. Next, use the up and down buttons to select the clock option and press OK to enter the adjustment mode. Be patient when adjusting the hours and minutes because the buttons respond a bit slowly. Once done, press confirm to save. I always felt that inaccurate time could affect navigation, especially on highways—if GPS synchronization fails, it could be troublesome, so I check it regularly. One more tip: never operate it while driving; safety first. Taking a few extra minutes to park and adjust is the most reassuring way.
I usually enjoy tinkering with these car settings, and adjusting the time is no big deal. First, make sure the car is parked and stable. Look for the button below the dashboard, usually the small icon displaying information, press it to switch to the setup mode, and the menu will show the clock option. Then use the up and down buttons on the left side of the steering wheel to select the hour, adjust with the plus and minus buttons, confirm, and then adjust the minutes in the same way. Finally, press the exit button to save. The process is quite foolproof, but don’t go too fast to avoid mistakes. Last time I messed up the date and had to reset it manually, so I recommend checking periodically to avoid small issues causing bigger delays. Changing the battery might also affect the time settings, so knowing these tips can save you a lot of hassle.
To adjust the time, simply put: turn the key to the power position without starting the engine, then press the button combination on the dashboard. For most Honda models, hold the info button for a few seconds to enter the menu, use the control keys to navigate to the time setting section. Adjust hours and minutes with the directional keys, then confirm and exit. Keep it straightforward—just avoid adjusting while driving to prevent accidents. Accurate time helps synchronize the dashboard and makes navigation more reliable.
