How to Adjust the Time on a Buick Excelle?

What Maintenance is Needed After a Car Has Driven 60,000 Kilometers?

After a car has driven 60,000 kilometers, the maintenance items include changing the engine oil, replacing the brake fluid, replacing the three filters, replacing the transmission fluid, and checking the tires. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. Here are the maintenance tasks required for a car after 60,000 kilometers: Changing the engine oil. After driving 60,000 kilometers, the car can switch to a higher viscosity and more protective engine oil, such as 0W-40, to ensure the engine operates more efficiently. Replacing the brake fluid. Generally, the brake fluid should be replaced after about 40,000 kilometers to ensure the braking system functions properly. Additionally, during the major maintenance at 60,000 kilometers, the wear level of the brake pads should be checked. If the wear is severe, the brake pads should also be replaced. Replacing the three filters. These include the air filter, oil filter, and cabin air filter. The three filters are parts that are prone to contamination and wear, so they usually need to be cleaned or replaced during each maintenance session. Replacing the transmission fluid. Generally, manual transmission vehicles require transmission fluid replacement every 50,000 kilometers, while automatic transmission vehicles need it every 80,000 kilometers. During major maintenance, the transmission fluid should be inspected. Checking the tires. Inspect the tire wear to ensure it is normal. If the wear is severe, the tires should be replaced promptly. Spark plugs: They ignite the air-fuel mixture to generate power and seal the spark plug hole to maintain cylinder pressure. They should be inspected every 40,000 kilometers. Battery: The battery usually needs replacement every 4-5 years, depending on usage habits. If the car's electrical functions (e.g., radio) are frequently used while the engine is off, the battery may wear out faster. Car maintenance generally includes the following inspection or replacement tasks: checking the coolant level; inspecting the brake and clutch fluid levels; verifying the power steering fluid level; examining all oil pipe connections for leaks; checking the battery fluid level and windshield washer fluid level; inspecting the condition and tension of belts (generator, air conditioning, water pump, and power steering pump); ensuring all lights (headlights, daytime running lights, turn signals, brake lights, reverse lights, and fog lights) are functional; checking tire pressure and wear, tightening the tire bolts to the specified torque, adjusting tire pressure to the recommended level, and rotating tires if necessary; and verifying that the vehicle's exhaust emissions meet standards. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. Modern car maintenance primarily covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more.

7

4

Share

What causes the ABS warning light to come on?

There are various states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and calculating the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can lead to signal issues, causing system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and the voltage rises, the ABS warning light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, loose wiring connections in the ABS hydraulic valve body, or ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. This can also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's specified tire and wheel rim sizes, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward, then release the pedal to complete the self-setting process. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

15

3

Share

What is the function of a fuel filter?

The function of a fuel filter is to remove harmful particles and moisture from the engine fuel system to protect components such as the fuel pump, injectors, cylinder liners, and piston rings, thereby reducing wear and preventing blockages. The fuel filter eliminates solid contaminants like iron oxide and dust contained in the fuel, preventing fuel system blockages (especially in the injectors), reducing mechanical wear, ensuring stable engine operation, and improving reliability. There are three types of fuel filters: diesel filters, gasoline filters, and natural gas filters. Fuel filters are consumable items and require regular replacement and maintenance during vehicle use; otherwise, they will not provide adequate protection.

20

3

Share

What does the tire code 18560r15 represent?

Tire code 18560r15 represents the following: 185 indicates the tire section width in millimeters, typically ranging from 145 to 285mm in 10mm increments. The letter R stands for Radial, denoting the tire's radial ply construction. 15 refers to the rim diameter in inches. 60 is the aspect ratio, which is the ratio of the tire's sidewall height to its section width; 60 represents 60%. Generally, tire aspect ratios range between 30% to 80%. Under normal circumstances, regular passenger cars should not use tires with aspect ratios exceeding 75%, while luxury cars and high-performance sports cars are recommended to use tires with aspect ratios below 60%.

9

0

Share

Where is the fuel pump fuse located in the Explorer?

Explorer fuel pump fuse is located in the central junction box under the glove compartment, marked with fuse number F51, 15A. The Explorer is equipped with an upgraded 2.3T EcoBoost engine, delivering a maximum output of 276 horsepower, paired with a new 10-speed automatic transmission. The Explorer is a large SUV introduced by Ford, with dimensions of 5050mm in length, 2004mm in width, 1775mm in height, and a wheelbase of 3025mm. The Explorer embodies the modern American SUV design style, featuring a spacious body size, flexible and smooth body lines combined with muscular contours, presenting a sporty appearance and superior aerodynamic performance.

14

2

Share

What is the ground clearance of the Chevrolet Orlando?

The ground clearance of the Chevrolet Orlando is 180 mm. The Orlando is a compact car under SAIC-GM Chevrolet, with dimensions of 4684 mm in length, 1807 mm in width, and 1628 mm in height, and a wheelbase of 2796 mm. In terms of exterior design, the Orlando adopts Chevrolet's latest family design language, featuring a new family-style dual grille design with a narrow top and wide bottom, complemented by a high-gloss black trapezoidal grille to accentuate the bold front fascia. The Chevrolet Orlando is equipped with a three-cylinder turbocharged engine, delivering a maximum horsepower of 163 hp, a maximum torque of 230 Nm, a maximum power of 120 kW, and a maximum power speed of 5500 rpm.

13

5

Share

How to Adjust the Time on a Buick Excelle?

What Maintenance is Needed After a Car Has Driven 60,000 Kilometers?

What causes the ABS warning light to come on?

What is the function of a fuel filter?

What does the tire code 18560r15 represent?

Where is the fuel pump fuse located in the Explorer?

What is the ground clearance of the Chevrolet Orlando?

The Hazards of Driving onto Curb for Vehicles?

What is the fuel consumption of the Audi A8?

Are Encouraging Words Helpful for the Subject 3 Driving Test?

Do parallel imported vehicles still require tax payment?