How to adjust the time on a B50?

What does the eco display in a car mean?

When a car displays eco, it indicates the vehicle's fuel-saving mode, which is activated by pressing the eco button on the central console. This mode is suitable for urban driving conditions and significantly improves fuel efficiency. However, this mode reduces throttle sensitivity and may result in sluggish acceleration. The eco mode automatically turns off when the vehicle speed exceeds 120 kilometers per hour. The eco mode may also fail under the following circumstances: 1. When the vehicle speed exceeds 120 kilometers per hour, the eco mode automatically deactivates; 2. When idling or in N or P gear, or in manual mode, the eco mode may also deactivate; 3. When high torque output is required, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the eco mode will not function in this scenario either.

12

4

Share

Where to Add Windshield Washer Fluid for Small Cars?

Small cars' windshield washer fluid is added at: 1. Pull the engine compartment lever in the driver's cabin to open the engine compartment; 2. Locate the windshield washer fluid filler port, open the cap and add the fluid inside. There are two forms of automotive windshield washer fluid: solid and liquid. Solid windshield washer fluid needs to be dissolved in water according to the proportion. After placing the solid windshield washer fluid into the windshield washer tank, add clean water or dissolve the solid windshield washer fluid in a plastic container before injecting it into the windshield washer tank. Liquid windshield washer fluid needs to be distinguished by type. Concentrated liquid windshield washer fluid, due to its high corrosiveness, needs to be diluted with water according to the instructions before adding. Non-concentrated liquid windshield washer fluid can be used immediately after purchase.

7

1

Share

How to Open the New Magotan Key Fob?

To open the new Magotan key fob, follow these steps: 1. Press the small button on the side of the key fob's tail cap; 2. Pull out the key blade; 3. Push the chrome cap at the tail of the key sideways until you hear a click, then pull the cap upwards; 4. Use your thumbs to pry open the key fob by gripping the side slots and pulling it apart. The new Magotan is Volkswagen's first B-segment sedan, with a body length of 4866mm, width of 1832mm, height of 1464mm, and a wheelbase of 2812mm. It has a top speed of 230km/h and is front-wheel drive. Engine options include 1.4TSI, 2.0TSI (low-power version), and 2.0TSI (high-power version).

8

4

Share

Where is the cabin air filter located in the Haima S5?

The cabin air filter of the Haima S5 is located inside the central partition on the right side of the accelerator pedal. The steps to replace the cabin air filter are as follows: 1. Remove the plastic cover on the right side of the accelerator pedal; 2. After removing the plastic cover, the cabin air filter will be visible inside; 3. Replace the old cabin air filter with a new one; 4. Reinstall the cover to complete the replacement. The Haima S5 is an SUV model jointly designed by Haima Automobile and Italian LDA Design Company. Its body dimensions are 4418mm in length, 1823mm in width, and 1630mm in height, with a wheelbase of 2630mm.

20

1

Share

What Components Make Up a Universal Joint Drive?

Universal joint drive consists of universal joints, drive shaft, and intermediate support. During installation, it is essential to ensure that the universal joint yokes at both ends of the drive shaft are aligned in the same plane. Universal joint drives are commonly found in various parts of a vehicle, such as the steering column beneath the steering wheel, the half-shafts of the wheels, and the drive shafts of rear-wheel-drive or four-wheel-drive vehicles. These all fall under the category of universal joint drives. A universal joint drive is a mechanism designed to transmit power between two shafts whose relative positions continuously change during operation. Its primary function is to connect the transmission output shaft and the differential input shaft, which are not aligned in a straight line, and to reliably transmit power even when the angle and distance between the two shafts frequently vary.

8

5

Share

What is the reason for the smell of raw gasoline when starting a cold engine?

The reasons for the smell of raw gasoline when starting a cold engine are: 1. Excessive carbon deposits on the pistons due to cylinder combustion. The cylinder has a certain adsorption effect on gasoline, and excessive carbon deposits can cause a lot of gasoline to adhere to the valves and pistons, leading to insufficient high pressure in the engine and resulting in a stronger smell of raw gasoline; 2. Faulty fuel injector; 3. After the engine is turned off, some gasoline does not fully combust. Since the car is closed, the volatilized gasoline gas fills the car, also causing the smell of raw gasoline; 4. When starting a cold engine in winter, the cold weather makes it harder to ignite, causing some gasoline to be discharged from the exhaust pipe, hence the smell of raw gasoline.

15

0

Share

How to adjust the time on a B50?

What does the eco display in a car mean?

Where to Add Windshield Washer Fluid for Small Cars?

How to Open the New Magotan Key Fob?

Where is the cabin air filter located in the Haima S5?

What Components Make Up a Universal Joint Drive?

What is the reason for the smell of raw gasoline when starting a cold engine?

How to Remove the Energy Consumption Display on Mercedes Dashboard?

What is the difference between a car tachometer and a speedometer?

Where Does the Water Sound Come From When Stepping on the Accelerator?

How to eliminate ABS?