How to adjust the time on a 7th generation Accord?

1 Answers
MacRuth
07/25/25 2:31pm
To adjust the time, press and hold the first 'S' letter button at the top right of the radio switch for 5 seconds until you hear a beep, then press 4-5 to adjust the time. Below is the method for adjusting the time on a 7th generation Accord: 1. After starting the car, press the 'SOUND' button until you hear a beep, then release. 2. The time will start flashing. 3. Use the 'NR' button and 'DISC-' button to adjust. 4. Once all adjustments are complete, press the 'SOUND' button again to save. Below is additional information about the 7th generation Accord: 1. Engine: Equipped with a 2.4L inline 4-cylinder gasoline engine, producing 120 kW (170 hp) and 220 Nm of torque, with multi-point fuel injection. It comes with a traditional 5-speed AT automatic transmission or a 5-speed manual transmission. 2. Body structure: Front-engine, front-wheel-drive layout, front double-wishbone independent suspension, rear multi-link independent suspension, unibody construction, mechanical hydraulic power steering, body dimensions of 4854X1821X1463 mm, 4-door 5-seater sedan.
Was this review help?
11
5
Share
More Forum Discussions

How many kilowatt-hours of electricity does a Model 3 require for a full charge?

model3 requires 75 kilowatt-hours of electricity for a full charge. The Tesla Model 3 has a range of 346km and accelerates from 0 to 100km/h in less than 6 seconds. The base version requires 50 kilowatt-hours, while the long-range version requires 75 kilowatt-hours. A full charge can provide a range of at least 400 to 500 kilometers, making it very economical. Regularly clean the battery: During daily use, pay attention to the condition of the battery. Over time, the battery may become covered with dust, powder, oil stains, etc. To ensure the battery functions properly, promptly clean the dirt from the battery panel and the positive and negative terminals to extend its lifespan. Avoid long-term parking: If the vehicle is left unused for an extended period, the battery will self-discharge. Therefore, even if you don’t use the car regularly, it’s recommended to start it once a week and take it for a short drive to keep the battery fully charged. Regularly inspect the battery: The typical lifespan of a vehicle battery is 3-4 years. For high-end models with more electronic systems, the battery lifespan may be shorter. Regular inspections of the battery’s charge retention can help maintain it in optimal working condition.
7
0
Share

What brand is the transmission of the Changan CS75Plus?

The transmission of the Changan CS75Plus is from Aisin. Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the top market share in the transmission field globally. The Changan CS75 comes with two powertrains: 1.5T and 1.8T, while the CS75Plus is equipped with 1.5T and 2.0T engines. The 1.5T is paired with an Aisin 6AT, and the 2.0T is matched with an Aisin 8AT, both used in the same model. The Aisin 6AT transmission utilizes two sets of gear trains, reducing fuel consumption during upshifts, and also aids in torque converter lock-up. It employs an energy-saving valve. The Aisin 6AT features a long-stroke damper, effectively suppressing vibrations during driving. The torque converter is equipped with a heat exchanger connected to the engine cooling system, using circulating coolant to rapidly cool the transmission oil. The Aisin 8AT transmission adds a control clutch to the original Lepelletier mechanism and replaces one of the standard planetary gearsets with an internal-external meshing planetary gearset to achieve eight gears. It uses four sets of friction clutches, two sets of brakes, and three innovative planetary gear sets. From first to eighth gear, including reverse, two sets of shifting mechanisms are engaged. For the CS75Plus transmission in daily use, the following points should be noted: Do not delay changing the transmission oil for too long. Although many models now use maintenance-free transmission oil, 'maintenance-free' does not mean it never needs replacement. Prolonged intervals can damage internal bearings and housing components. Avoid prolonged coasting in neutral. While manual transmission drivers often coast in neutral, doing so in an automatic can cause overheating. Re-engaging D gear afterward may cause jolts. Never shift into D/R gear before the vehicle has come to a complete stop. Some drivers shift into reverse while still moving to demonstrate 'smooth' operation, but this severely damages transmission gears and can lead to gear grinding over time. Avoid frequent steep hill climbs in D gear. Automatic vehicles can overheat under high load or shift too early, causing poor climbing performance. Use manual mode to lock in low gears or sport mode to protect the transmission. Do not tow long distances. If an automatic vehicle breaks down, use a flatbed tow truck with the vehicle in N gear. Never use tow ropes for direct dragging.
3
0
Share

What is the fuel consumption per 100 kilometers for the Honda CRV?

The fuel consumption of the Honda CRV ranges between 6.4 and 7.3L/100KM, varying with different configurations. For two-wheel drive configurations, the fuel consumption is between 6.4 and 6.8L/100KM, while for four-wheel drive configurations, it ranges from 6.7 to 7.3L/100KM. Vehicles used in winter may experience a difference of about 1-2 liters in fuel consumption compared to summer. Additionally, fuel consumption is also influenced by the quality of fuel used, maintenance conditions, external environment, and driving habits. Below are some common reasons for high fuel consumption: Improper driving habits: Fuel consumption is closely related to the driver's habits, such as not turning off the engine during prolonged idling or frequent ignition, aggressive acceleration or frequent braking, driving at high speeds in low gears or low speeds in high gears. These driving habits significantly contribute to increased fuel consumption. Abnormal tire pressure and tire wear: Low tire pressure increases friction between the tires and the ground, leading to greater resistance and higher fuel consumption. Normal tire pressure is around 2.5bar, which can be slightly reduced by 0.1bar in summer. However, tire pressure should not be too high either; it's best to maintain it according to the vehicle's standard values. Moreover, severely worn tires often cause slipping, which also increases fuel consumption. Fuel quality and carbon deposits: Many drivers overlook fuel quality. Poor-quality gasoline can lead to increased carbon deposits, which roughen the intake pipe walls, affecting air intake and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, gasoline quality should not be ignored. Regular maintenance at a 4S shop is a forward-looking investment, ensuring normal vehicle performance and saving unnecessary future expenses.
10
3
Share

Will Plastic Hub Caps Fall Off When Driving on the Highway?

Plastic hub caps will not fall off when driving on the highway. To reduce costs, many domestic car manufacturers often use steel wheels instead of aluminum alloy wheels for lower-end models, then cover the steel wheels with plastic hub caps. These caps serve no functional purpose other than to conceal the steel rims and slightly improve the wheel's appearance. Drive in the designated lane on the highway: Highways have clearly marked lanes, including dedicated lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your appropriate lane promptly after completing the maneuver. Avoid occupying other lanes for extended periods. Additionally, the emergency lane should not be occupied for non-emergency reasons. Avoid speeding on the highway: The dangers of speeding are well-known, whether on local roads or highways, as it can lead to irreversible consequences. Maintain a safe longitudinal distance between vehicles on the highway: Under normal conditions, with dry roads and good braking, the distance between vehicles (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, maintain at least 80 meters, and at 100 km/h, maintain at least 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the distance should be doubled or more. Pay attention to traffic signs on the highway: While driving, always observe roadside and overhead signs and markings. Drive slightly to the right to avoid crossing the right lane divider, providing sufficient lateral space for overtaking vehicles. Avoid fatigue driving on the highway: Fatigue driving is extremely dangerous on highways. When fatigued, a driver's reaction time slows, making it difficult to respond correctly to sudden situations.
11
5
Share

How many points are deducted for littering on the highway?

Littering on the highway does not result in point deductions, but it can lead to fines. According to the relevant provisions of the Road Traffic Safety Law, motor vehicles that spill or scatter cargo while driving will be fined. If the litter causes accidents involving other vehicles, the responsible party will bear corresponding accident liability. If the litter results in property damage or personal injury, civil compensation liability may also be incurred, and in severe cases, criminal liability may apply. Drive in the designated lane on the highway: Highways have clearly marked lanes for large vehicles, small vehicles, etc. When overtaking, avoid occupying a lane for an extended period and return to your designated lane promptly after completing the maneuver. Additionally, emergency lanes should not be occupied for non-emergency reasons. Avoid speeding on the highway: The dangers of speeding are well-known, whether on local roads or highways, as it can lead to irreversible consequences. Maintain a safe following distance on the highway: Under normal conditions, with dry pavement and good braking, the following distance (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, maintain at least 80 meters; at 100 km/h, maintain at least 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the following distance should be doubled. Pay attention to traffic signs on the highway: While driving, always observe roadside and overhead signs and markings, and stay appropriately to the right to avoid crossing the right lane divider, ensuring sufficient lateral distance for overtaking vehicles. Avoid fatigued driving on the highway: Fatigued driving is extremely dangerous on highways, as it reduces reaction time and makes it difficult to respond correctly to sudden situations.
16
5
Share

What is the fuel consumption of the classic Focus?

The fuel consumption of the classic Focus automatic transmission is 12L/100km. Actual fuel consumption is related to various factors, so the specific fuel consumption should be based on actual usage. In addition to the car's design and engine factors, the real cause of fuel consumption waste is the driving habits of the owner, among which frequent sudden braking and sudden acceleration are the biggest reasons for the increase in fuel consumption. The following are some common reasons for high fuel consumption: Improper driving habits: The amount of fuel consumption is closely related to the driver's personal habits, specifically manifested in not turning off the engine during long idling or frequent ignition, aggressive acceleration or frequent braking while driving, driving at high speeds in low gears or low speeds in high gears, etc. All these driving habits greatly "contribute" to the increase in fuel consumption. Abnormal tire pressure and tire wear: If the tire pressure is too low, the friction between the tires and the ground increases, resistance becomes greater, and fuel consumption will rise. Normal tire pressure is around 2.5bar, which can be appropriately reduced by 0.1bar in summer; of course, tire pressure should not be too high either, it's best to inflate according to the vehicle's standard value. In addition, if the tires are severely worn, slipping will occur frequently, and fuel consumption will also increase. Fuel quality and carbon deposits: Many car owners do not pay attention to fuel quality. Poor-quality gasoline will increase carbon deposits, and excessive carbon deposits will roughen the intake pipe walls, affecting the intake effect and the quality of the air-fuel mixture, leading to a sharp increase in fuel consumption. Therefore, gasoline quality cannot be ignored; thus, regular maintenance at a 4S shop is a forward-looking investment, not only ensuring the normal performance of the vehicle but also saving unnecessary expenses in the future.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.