How to Adjust the Time on a 2010 Teana?

1 Answers
VonJosephine
07/30/25 2:18am
2010 Teana time adjustment method: After turning on, the CLK button displays and sets the time. Press and hold CLK for about 5 seconds until the time display flashes on the screen. Use the adjustment knob (turn left to decrease, turn right to increase) to set the time, then press CLK to confirm. Here is some related information: 1. The Teana's body dimensions have been lengthened and widened. With a body length of 4901mm, it appears very sleek with the rear styling and waistline. 2. The 8-inch LCD display on the center console is large enough, but the display quality doesn't look premium. The interface design is relatively simple and clearly layered, making it easy to use even for first-time users. Functionally, it offers rich multimedia playback features and connectivity applications, including in-car apps, in-car WiFi, and common internet functions, but it does not support CarPlay.
Was this review help?
16
5
Share
More Forum Discussions

How to Use the Classic S Gear in Focus?

Here is how to use the classic S gear in Focus: While the car is in motion, simply shift into the S gear, and you can freely switch between gears. Below is some related information about the Focus: 1. Power Performance: The Ford Focus is equipped with the EcoBoost180 turbocharged dual-injection engine paired with the only 8AT in its class, forming a "high-performance CP." It delivers a maximum power of 128 kW and a peak torque of 243 N·m, accelerating from 0 to 60 km/h in just 4.5 seconds. Buyers also enjoy the added benefit of a lifetime engine warranty. 2. Configuration Features: The Ford Focus comes with the SYNC+ intelligent information entertainment system. This system boasts industry-leading natural semantic recognition capabilities, supports multi-scenario wake-free operation, and understands mixed Chinese-English commands. It can also engage in small talk, tell jokes, and control four major functions—entertainment, smart navigation, communication, and cabin temperature—via voice commands. Additionally, the car features an upgraded 8-inch digital instrument cluster and a 12.3-inch central control screen, further enhancing its technological appeal.
1
5
Share

What is the cause and solution for high idle speed after replacing the idle speed motor?

First, it is recommended to have the vehicle replaced with a genuine idle speed motor at a 4S shop. After installing the genuine part, conduct a test drive for observation, as the issue is likely related to the idle speed valve. Improper assembly can also lead to high idle speed. Focus on inspecting the assembly condition of the throttle body and idle speed valve, and check for any air leakage.
1
1
Share

How to Repair a Tire Balancing Machine Failure?

First, check whether the rotor being balanced itself is qualified, which is often encountered in the maintenance industry. If the rotational speed is unstable, the reference signal is also unstable, and after processing by the microcomputer, it remains unstable, the error will be large. If the sensor has no output or the output is unstable, it will cause balancing errors. On-site, a high-sensitivity multimeter can be used for inspection. Sometimes, due to the aging of the electrical measurement system components or the influence of temperature, the parameters stored for a certain type of rotor may change.
3
5
Share

What to Do About Spotted Paint Peeling on the Hood?

You can use a touch-up pen for treatment, or a sticker can also work. In such cases, traces of scratches or friction are usually already visible. Using a touch-up pen is a common method for handling this issue. Of course, the touch-up pen you purchase must match the color of your car's paint.
10
0
Share

How to Solve the Stiffness of Electric Power Steering?

Tire toe-in value is incorrect, it is necessary to go to a 4S shop to adjust the tire toe-in value, and a four-wheel alignment may be required if necessary. The steering wheel components lack lubricating oil, applying lubricating oil to the components can solve the problem. The steering column is stuck, replacement of the steering column may be necessary in certain cases. The steering angle sensor is not sensitive, check if it is due to poor lubrication of the angle sensor, replacement is also an option.
2
5
Share

How to Match the Instrument Panel After Replacement for Buick and Chevrolet?

After replacing the instrument panel, the anti-theft system will lock, and it is necessary to use an automotive computer diagnostic tool to rematch the keys. Use the automotive computer diagnostic tool to enter the instrument panel system. Input the original instrument panel number and confirm. Use the automotive computer diagnostic tool to enter the instrument panel system. Match the keys and confirm.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.