···
Log in / Register

How to adjust the time on a 2010 Teana?

1 Answers
Winifred
07/25/25 7:19am

The method to adjust the time on a 2010 Teana is: 1. Locate and hold the dispclock button until the time starts flashing; 2. Rotate the right tunefolder to adjust the time. The 2010 Teana has the following dimensions: length 4850mm, width 1795mm, height 1475mm, wheelbase 2775mm, minimum ground clearance 135mm, and fuel tank capacity 70l. The 2010 Teana is equipped with a 2.0L naturally aspirated engine, with a maximum power of 110kW and a maximum torque of 190Nm, paired with a CVT transmission.

Was this review help?
3
2
Share
More Forum Discussions

How to Clean Carbon Deposits with Dry Ice?

Dry ice cleaning works through a process of physical cryogenic freezing, impact peeling, and blow-off removal. Below are the principles of dry ice cleaning for carbon deposits: 1. New cold spray technology: Utilizing the high-pressure air from an air compressor to spray dry ice onto engine carbon deposits, the accelerated impact of dry ice particles causes the carbon deposits to crack. The cryogenic temperature of dry ice freezes and embrittles the carbon deposits, reducing their adhesion. This rapidly freezes and peels off dirt and oil from the surface without causing any damage to the engine's metal surfaces or affecting its sealing. Moreover, dry ice cleaning machines can quickly clean carbon deposits without disassembly, with visible results. 2. Physical cryogenic freezing: The low temperature of dry ice freezes the engine carbon deposits, increasing their brittleness, reducing viscosity, and weakening adhesion. Combined with the impact peeling from compressed air, the embrittled carbon deposits form cracks. Under the temperature changes of dry ice, they contract, and with the impact of air waves, effectively cleaning the carbon deposits.
12
5
Share

Where is the flasher located in the Wuling Hongguang?

Wuling Hongguang flasher is located in the engine compartment of the car. Open the engine hood and you can find it at the upper left corner of the small coolant tank. Below is more information about car flashers: 1. The function of the flasher is to enable the turn signals or hazard warning lights to emit alternating bright and dim light signals during driving, effectively alerting passing vehicles and pedestrians to pay attention to safety. 2. The flasher is a flashing device that indicates a change in the direction of the car during driving. 3. The flasher is installed in the flasher box, and through its control, it can accurately indicate the direction of the car, especially with an automatic protection function.
5
2
Share

Where is the daytime running light switch for the Baojun 510?

Baojun 510 daytime running lights do not have a switch. The daytime running lights will automatically turn on when the vehicle is started and automatically turn off when the vehicle is turned off. Below are the specific operation methods for the running lights: 1. The Baojun 510 daytime running lights are located in the topmost strip-shaped light group. 2. The daytime running lights are mainly composed of LED light groups with adjustable brightness. 3. Inside the driver's compartment, the light adjustment can be found on the backside of the left side of the steering wheel. 4. The outermost part of the light control lever is the high beam and width light adjustment knob. 5. Pushing the lever downward can turn on the high beam. 6. Adjusting the left knob to the width light position can reduce the brightness of the daytime running lights.
2
4
Share

Where is the transmission oil filler port located on the Citroen C-Quatre?

The location of the transmission oil filler port on the Citroen C-Quatre is not uniform and there are two possible scenarios: on the side of the transmission; or by removing the reverse gear switch, where the reverse gear switch is located. If you need to add transmission oil to the Citroen C-Quatre, here are the methods: 1. Manual transmission models: There are two bolts on the transmission housing, one at the top and one at the bottom. To add transmission oil, unscrew the top bolt. Before adding oil, you need to drain the old transmission oil by unscrewing the bottom bolt. 2. Automatic transmission models: There are two bolts on the transmission pan, a larger one for draining the oil and a smaller one for adding oil.
13
3
Share

Where is the Odyssey fuel filter located?

Odyssey fuel filter is located under the second row of seats, on the driver's side rear. Push the seat to the frontmost position and lift the carpet to find it. Here is some information about the fuel filter: 1. The fuel filter is integrated with the fuel pump assembly, so replacing the fuel filter requires removing the fuel pump assembly. 2. The fuel filter is used to filter impurities from gasoline and supply clean fuel to the engine. If the fuel filter is not functioning properly, impurities in the gasoline can easily clog the small passages in the carburetor, causing poor carburetor performance and a lean combustible mixture. 3. The main function of the fuel filter is to remove impurities from gasoline. If the fuel filter is dirty or clogged, the main symptoms are: slow or no response when accelerating, difficulty starting the car, and sometimes requiring 2-5 attempts to start the engine.
10
4
Share

How to Solve the Problem of Too Large Hood Gap on Superb?

The solution to the excessive hood gap on the Superb is as follows: There are two foot sleeves on the hood. First, turn the first foot sleeve downward, then adjust the other foot sleeve, and the gap will become smaller. The functions of the hood are as follows: 1. Protect the engine and surrounding pipeline accessories. Under the hood lie crucial components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system. By enhancing the strength and structure of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrostatic interference, ensuring the normal operation of the vehicle. 2. Aesthetics. The exterior design of a vehicle is a direct reflection of its value, and the hood, as a significant part of the overall appearance, plays a vital role. 3. Assist driving vision. During driving, the driver's front view and the reflection of natural light are crucial for correctly judging road conditions and what lies ahead. The shape of the hood can effectively adjust the direction and form of reflected light, thereby reducing the impact of light on the driver.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.