···
Log in / Register

How to adjust the time on a 2009 Peugeot 307?

4 Answers
DeEmmett
07/29/25 3:06pm

To adjust the time on a Peugeot 307, first press the MENU button on the display screen above the center console. Repeatedly press until the display shows 'Display Adjustment', then press the OK button to enter. Use the MENU button to toggle between year, month, day, hour, minute, and 12/24-hour format. Select the OK button to enter and modify each setting. After changing the values by repeatedly pressing the OK button, wait 10 seconds for the changes to take effect, or press ESC to cancel and return. Below is an introduction to the Peugeot 307: 1. The vehicle is equipped with common features for this class of cars, such as steering wheel audio controls, cruise control, an electric sunroof, and dual-zone automatic climate control. Additionally, the center console features a color screen and telephone keypad not found in the previous Dongfeng Peugeot 307 model. This system integrates GPS navigation, hands-free calling, DVD, and MP3 audio multimedia controls. 2. In terms of performance, the Dongfeng Peugeot 307 shares the same design philosophy as other models in its series, with a transverse engine, front-wheel drive, four-wheel independent suspension, and comprehensive active and passive safety features. Thoughtful human-centric design is evident throughout.

Was this review help?
20
5
Share
SanAaron
08/13/25 7:46am

When I first got my hands on the 2009 Peugeot 307, adjusting the time did take me a while to figure out. On the right side of the steering wheel, there's a set of multifunction buttons, one of which is labeled "MENU." After starting the car, press it lightly once to enter the main menu, then use the directional buttons to navigate to the clock setting option. Once inside, adjust the hours and minutes using the up and down keys, and press "Confirm" to save. If the operation fails, it might be due to overly sensitive buttons or the system not being fully booted—just try a few more times. Also, replacing the battery will reset the time, requiring you to set it again. I like to handle these little tasks over the weekend, sipping coffee while practicing, which feels quite relaxing. Remember to check the user manual for the exact location diagram to avoid accidentally touching other settings that might affect driving safety. Don’t worry about making mistakes; the system will revert to default automatically, but double-check before saving to ensure accuracy. A bit of practice will help you master the trick in no time.

Was this review help?
16
3
Share
Expand All
LeCarter
10/11/25 6:30am

Adjusting the time on the 2009 Peugeot 307 is quite straightforward, and I often help friends with this. The small buttons on the steering wheel are very practical—just press 'MENU' to bring up the interface and navigate to the time settings. The specific steps are: start the engine, wait a few seconds for the system to activate, press the button to enter the menu, use the directional keys to select the clock option, adjust the hour and minute values, and finally save the settings. The whole process takes about a minute. The principle is that the storage unit records your input without affecting the car's performance. During routine maintenance, it’s good practice to check the time to prevent minor issues. If the time jumps incorrectly, it might be due to a loose power connection—just readjust later or inspect the wiring. With practice, it becomes muscle memory—nothing difficult, just stay calm and patient.

Was this review help?
8
4
Share
Expand All
DelilahLee
11/24/25 7:37am

Simple steps: After starting the car, locate the "MENU" button on the steering wheel, press it to enter the menu, select the clock setting option, adjust the time value using the directional keys, then save and exit to complete the process. Ensure the car is stationary during operation to avoid distractions. After completion, verify the correct display on the dashboard.

Was this review help?
2
5
Share
Expand All
More Forum Discussions

What is the equivalent car engine displacement for 400cc?

400cc equals 0.4 liters of displacement, where "400CC" refers to the exhaust volume of a motorcycle engine's combustion chamber. CC is the volume unit for cylinder displacement, with 1CC equivalent to 1ml. According to China's relevant standards, different displacements correspond to the following vehicle types: 30CC and below are defined as fuel-powered bicycles. A type of bicycle includes a frame, front wheel, rear wheel, a bottom bracket set at the lower end of the frame, and an engine. The bicycle frame is composed of interconnected hollow tubes containing fuel oil. The front and rear top parts of the frame are equipped with fuel filling holes and air release holes, respectively, and an oil pipe connects the lower part of the bicycle frame to the engine. For motorcycle engine daily maintenance, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; Oil passes through the fine pores of the filter, trapping solid particles and viscous substances in the oil. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area and accelerating engine wear, intensifying internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases in the combustion chamber.
6
5
Share

What Causes the Engine Warning Light to Illuminate in a Ford Kuga?

The engine warning light in a Ford Kuga may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or oil quality issues: Failure to use the fuel or engine oil as recommended by the manufacturer may cause engine wear, leading to the warning light illuminating. Poor combustion of the air-fuel mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines can cause poor combustion. Turbocharger problems: The intake boost pipes or turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's intake system has issues, it may lead to clogged engine pipes, and in severe cases, trigger the engine warning light. A dirty or uncleaned air filter can cause intake problems. Exhaust problems: Exhaust system faults can also trigger the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is the most frequent culprit, often damaged by leaded gasoline, lead or silicon-based oil additives, physical impacts, or fuel system issues. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the anti-theft system may prevent the engine from operating normally, and the engine warning light will illuminate. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. If there are issues like shaking or black smoke, avoid restarting the engine. Note: Never restart the engine if the light is red. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position without engaging the clutch. The vehicle will perform a self-check. After 5-10 seconds, check if the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
18
3
Share

What are the solutions for excessive noise in Civic cars?

Civic car noise reduction solutions include: performing vibration damping and sealing treatments on the car's sheet metal, and improving the defects in the horn installation environment. Taking the 2021 Civic as an example, it is a compact car with body dimensions of: length 4517mm, width 1799mm, height 1434mm, wheelbase 2700mm, minimum ground clearance 104mm, and body weight 1343kg. The 2021 Civic is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 177PS, maximum torque of 220Nm, maximum power of 130kW, and is paired with a continuously variable transmission.
10
0
Share

What is the reason for the exclamation mark displayed on the car dashboard?

The reasons for the exclamation mark displayed on the car dashboard are: 1. A triangle with an exclamation mark in the middle is a general fault indicator, mainly indicating parking sensor failure, overheating of the dry dual-clutch transmission clutch, fuel cut-off system intervention, or malfunction; 2. An exclamation mark inside a circle with parentheses is a brake system warning light, mainly indicating a fault in the brake system, low brake fluid level during driving, or the handbrake being engaged; 3. An exclamation mark in the middle below parentheses is a tire pressure monitoring warning light, which lights up when the pressure in one of the vehicle's tires is too low.
18
5
Share

What to Do If You Drive Without Carrying Your Driver's License and Vehicle Registration?

Here is the relevant information about what to do if you drive without carrying your driver's license and vehicle registration: 1. Have other valid identification documents: Valid identification documents include ID cards, military officer certificates, passports, etc. These are also official documents in China and contain a lot of personal information. 2. Alipay ID folder function: The Alipay mobile app has an ID folder function. You can input your ID card information or driver's license information into the system. 3. Take a photo of your driver's license with your phone: Provide other valid identification information. Provide it to the traffic police for verification.
6
0
Share

Where is the horn button on the Baojun 510?

The horn button on the Baojun 510 is located in the center of the steering wheel, marked with a small horn symbol. The horn serves as the vehicle's audio signal device. Taking the 2021 Baojun 510 as an example, it is a compact SUV with the following dimensions: length 4220mm, width 1740mm, height 1615mm, and a wheelbase of 2550mm. The 2021 Baojun 510 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum torque of 135Nm, and a maximum power output of 73kW.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.