How to Adjust the Time and Date on a Ford Focus?

1 Answers
AndrewFitz
07/29/25 5:48pm
Method to adjust the time and date on a Ford Focus: 1. Turn the key to the second position. On the turn signal lever, there is a SET button and an adjustable switch that can be moved up and down; 2. Move the switch downward until SET is displayed on the instrument panel; 3. Press the SET button, then continue to move the switch downward until the indicator bar is on CLOCK; 4. Press the SET button, and now you can use the switch to adjust the year up or down. After setting the year, press the SET button to proceed to adjust the month, and use the same method to adjust the hour and minute; 5. After completing the adjustments, press the SET button and select EXIT to return. Taking the 2021 Ford Focus as an example, its body structure is a 4-door, 5-seater sedan with a length, width, and height of 4674mm, 1810mm, and 1468mm respectively, a wheelbase of 2705mm, a fuel tank capacity of 53 liters, a trunk capacity of 511 liters, and a curb weight of 1242kg.
Was this review help?
6
1
Share
More Forum Discussions

What Do the Dashboard Indicator Lights Mean?

Different categories of indicator lights have the following meanings: 1. Battery Indicator Light: This light indicates the working status of the battery. It turns on when the ignition is activated and turns off after the engine starts. If it does not light up or remains on continuously, the generator and circuit should be checked immediately. 2. Fuel Indicator Light: This light warns of low fuel. When it illuminates, it means the fuel is nearly depleted. Generally, the vehicle can still travel approximately 50 kilometers from the time the light comes on until the fuel runs out. 3. Washer Fluid Indicator Light: This light shows the level of the windshield washer fluid. If the fluid is about to run out, the light will turn on, reminding the owner to refill the washer fluid promptly. After adding the fluid, the light will turn off. 4. Electronic Throttle Control (EPC) Indicator Light: Commonly found in Volkswagen models, this light illuminates for a few seconds during the vehicle's self-check when starting up and then turns off. If a fault occurs, the light will stay on, indicating that maintenance is required. 5. Front and Rear Fog Light Indicator Lights: These lights indicate the operational status of the front and rear fog lights. When the fog lights are turned on, both lights illuminate. In the diagram, the left light represents the front fog light, and the right light represents the rear fog light.
16
2
Share

What engine does the Cadillac Escalade use?

Cadillac Escalade uses a 6.2-liter naturally aspirated engine with 8 cylinders arranged in a V-type configuration and a DOHC valve train. This engine delivers a maximum power of 313 kW, a maximum horsepower of 426, and a maximum torque of 621 N·m. In terms of exterior design, the Cadillac Escalade perfectly embodies Cadillac's Art and Science philosophy. The eye-catching chrome grille follows the avant-garde design style of the Sixteen concept car, and the body side features seven chrome accents. For the interior, the Cadillac Escalade boasts a luxurious cabin with a heated leather and wood multifunction steering wheel, and a tri-zone independent climate control system that allows passengers in all three rows to adjust the temperature individually.
10
5
Share

How often should the fuel filter of the Arrizo 5 be replaced?

The fuel filter of the Arrizo 5 should be replaced approximately every 10,000 kilometers. The replacement method is as follows: 1. First, depressurize the system by removing the fuel pump fuse or relay, then start the engine until it automatically shuts off; 2. Lift the vehicle on a hoist, locate the fuel filter near the right rear wheel, remove the protective cover of the fuel filter using tools, and then disconnect the fuel lines with a wrench; 3. Replace with a new filter, reinstall the fuel lines and filter cover; 4. Lower the vehicle and start the engine to check for leaks. In terms of body dimensions, the Arrizo 5 measures 4572 mm in length, 1825 mm in width, and 1482 mm in height, with a wheelbase of 2670 mm. The body design of the Arrizo 5 inherits the HDS (Hydrodynamic Sculpture) design philosophy of the Arrizo series, where the designer incorporated the water element from the traditional Chinese Five Elements theory into the vehicle's body styling.
14
2
Share

Where is the Nissan X-Trail engine produced?

Nissan X-Trail engine is produced in China. It is a naturally aspirated engine with a maximum horsepower of 151 hp, a maximum torque of 194 Nm, and a maximum power of 111 kW. In terms of body dimensions, the Nissan X-Trail has a length, width, and height of 4675 mm, 1820 mm, and 1722 mm respectively, with a wheelbase of 2706 mm. For the interior, the Nissan X-Trail is equipped with advanced technologies such as a digital 6-disc high-fidelity theater CD plus audio sound system, intelligent remote key system, intelligent voice navigation system, ASCD cruise control system, rearview camera, side-view system, multimedia entertainment system, anti-glare interior rearview mirror, outside temperature display, and intermittent multi-stage adjustable front wipers.
3
5
Share

How to Replace the Battery in a Changan Car Key?

Method to replace the battery in a Changan car key: 1. Press and hold the top of the car key and pull upwards firmly to remove the physical key; 2. Use the back of a utility knife to move along the seam of the car key to open it; 3. Use a coin to pry out the old battery; 4. Insert the new battery into the car key; 5. Close the car key cover and reinsert the physical key. The Changan CS75 is a compact SUV under the Changan brand, with dimensions of 4650mm in length, 1850mm in width, and 1715mm in height, and a wheelbase of 2700mm. In terms of appearance, the Changan CS75 features a large number of metal decorative parts, with different textures achieved through processes such as electroplating and spraying, making every detail design feel exquisite and adding elegance to the robust presence of the Changan CS75.
20
2
Share

What is China IV in terms of national emission standards?

China IV refers to the National IV emission standard. The term 'China IV' indicates that the vehicle's engine system and emission standard tests are configured to be compatible, making it a transitional vehicle model. The sulfur content limit for National IV standard gasoline is 150 milligrams per kilogram. Currently, light-duty diesel vehicles comply with the Phase III emission standard, while light-duty gasoline vehicles adhere to the Phase IV emission standard. The National IV emission standard represents China's fourth-stage standard for controlling pollutants emitted by motor vehicles. Major automotive pollutants include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard aims to control and reduce vehicle emissions below specified thresholds.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.