How to adjust the throttle and brake of the Boyue?

1 Answers
Tabitha
07/30/25 5:40am
The method to adjust the throttle and brake of the Boyue: 1. Before adjustment, first determine the height of the throttle pedal; 2. In the engine compartment, pull the metal wire of the throttle cable to the left to see how much margin there is. When it can't be pulled anymore, it is the highest point of the throttle pedal; 3. The position of the clip and the cable sleeve will determine the height of the throttle pedal. Remove the clip and move the sleeve to the right, then secure it to raise the throttle pedal position, and vice versa to lower it. The Boyue is a compact SUV under Geely Auto. Taking the Boyue 2021 Million Edition 1.8TD Manual Two-Wheel Drive Comfort Model as an example, its length, width, and height are 4519mm, 1831mm, and 1694mm respectively, with a wheelbase of 2670mm. It is equipped with a 1.8L inline four-cylinder turbocharged engine and a 6-speed manual transmission.
Was this review help?
20
5
Share
More Forum Discussions

How to Reset the Maintenance Reminder Light?

Eliminating the maintenance reminder light most quickly and accurately requires the use of a fault diagnostic tool, which individual car owners generally do not possess. It is recommended that car owners visit a 4S shop for maintenance to reset the reminder light or go to an external 4S shop for elimination. For those who wish to reset the maintenance reminder light themselves, the main operational steps are as follows: 1. Turn the ignition key to the second gear position, hold down the small mileage reset button without releasing, insert the car key and rotate it until the dashboard lights up before releasing, and the maintenance light will go off. There is a button on the dashboard for adjusting the mileage; hold this button for 2-3 seconds in idle state. 2. Simultaneously press the brake pedal and the accelerator pedal, then wait for the maintenance light to flash (approximately 15 seconds). 3. Release the brake pedal and accelerator pedal.
6
3
Share

Why does the car shake when the air conditioning is on?

The reasons why the car shakes when the air conditioning is on are: 1. Carbon deposits on the spark plugs cause the engine's output torque to decrease. 2. Carbon deposits on the intake valves lead to abnormal cylinder pressure, causing the car's computer to judge a cylinder misfire and automatically cut off the fuel supply. 3. Using the wrong gasoline causes severe engine carbon deposits. 4. A dirty throttle affects engine operation. The solutions are as follows: 1. Soak the spark plugs in a container with white vinegar for 2 to 3 hours, scrub off the carbon deposits with a hard brush, and then clean them with gasoline. 2. Drive at high speed above 4000 rpm to burn off the carbon deposits in the cylinders. 3. Choose the appropriate gasoline according to the car's compression ratio. 4. Clean the throttle.
6
1
Share

What is the SWM car brand?

SWM refers to the SWM Motors brand. Here is an introduction to the SWM car brand: 1. SWM is a new passenger car brand under Huachen Xinyuan with Italian roots. The SWM brand was founded in Milan, Italy in 1971 and became popular in Europe and America during the 1970s and 1980s, serving as a symbol of Italian manufacturing. In 2014, the Oriental Xinyuan Group fully acquired the Italian SWM brand and established the SWM Motors Design Center in Milan, Italy. 2. SWM was originally one of the top three off-road motorcycle brands in Europe, alongside KTM and Husqvarna. 3. On July 27, 2016, the SWM Motors brand was launched in Beijing, China. On August 30, 2016, SWM Motors' first model, the 'SWM X7', was launched in Chongqing, targeting the mid-to-large seven-seat SUV market. On June 8, 2017, SWM Motors' second strategic model, the SWM X3, was officially released.
17
3
Share

Should the Haval M6 use 92 or 95 octane gasoline?

Haval M6 uses 92 octane gasoline. The following is a related introduction to the Haval M6: Appearance: The vehicle dimensions are 4649/1830/1705mm in length/width/height, with a 2680mm ultra-long wheelbase and a trunk capacity of 808L. Power: Equipped with a 1.5T turbocharged engine, delivering a maximum power of 110kw and a peak torque of 210 N·m. It features front MacPherson and rear double-wishbone four-wheel independent suspension, along with a professional SUV chassis. Configuration: Includes a multifunctional steering wheel, intelligent dual-mode anti-pinch electric sunroof, dual-zone automatic climate control, keyless entry + one-button start, and adjustable rear seat angles, among other features.
3
2
Share

Should I use L gear or S gear for climbing uphill?

If it is a short and gentle slope, using L gear can meet the climbing demand. For long and steep slopes, S gear is recommended. Here is some relevant information: 1. If the car is driving in congested traffic or other slow-moving sections, staying in D gear may cause frequent gear shifts, not only increasing fuel consumption but also reducing driving comfort. When encountering a long downhill section, shift to L gear, which keeps the transmission fixed between 1st and 2nd gears and allows engine braking, unlike using D gear for downhill driving. 2. S gear provides strong power and is the exclusive gear for sports mode. Many car owners are unsure when to use D gear versus S gear. Generally, D gear is sufficient for most situations, including highway driving, climbing, and overtaking. S gear offers high engine RPM and is suitable for clearing engine carbon deposits, short-term overtaking, and climbing steep slopes.
20
2
Share

Where to Place the Car Fire Extinguisher?

The locations for placing a fire extinguisher in a car include: 1. Inside the glove compartment. 2. Beside the seat. 3. In the trunk. Here are some relevant details: 1. The storage environment temperature for the car fire extinguisher should be within the range of -10 to 45 degrees Celsius. The placement location should be kept dry and ventilated to prevent the extinguisher from getting damp and corroding. 2. Precautions for using a fire extinguisher are: (1) Do not cover the extinguisher with items; it should be easily accessible for quick retrieval. (2) The extinguisher is only suitable for putting out initial fires. (3) Use the extinguisher correctly. (4) Check the extinguisher's pressure once a month. (5) Fire extinguishers have an expiration date; they should be configured and replaced as required.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.