How to Adjust the Steering Wheel Weight of Haval H6?

2 Answers
DelEmiliano
08/29/25 7:53am
Haval H6 steering wheel weight adjustment method: Some models use a mechanical hydraulic power steering system, which cannot be adjusted; some models use an electric power steering system, which can be adjusted, but the adjustment needs to be done at a 4S shop. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Taking the 2021 Haval H6 Third Generation 2.0T Automatic Two-Wheel Drive Max as an example: its length, width, and height are 4653mm, 1886mm, and 1730mm respectively, with a wheelbase of 2738mm. It is equipped with a 2.0T turbocharged engine, with a maximum power of 155kw and a maximum torque of 325nm.
Was this review help?
20
1
Share
DiKing
09/11/25 5:22am
I remember adjusting the steering wheel weight on my Haval H6 was quite straightforward. It's equipped with an Electric Power Steering system, commonly known as EPS, which can be easily configured through the vehicle's menu. Look for the driving settings either below the steering wheel or on the central control screen, then find the power assist adjustment option. Typically, there are three modes: Light, Standard, and Sport. I usually choose Light for city driving as it makes the steering wheel easier and more effortless; on highways, I switch back to Standard or Sport for more stable steering. After adjustment, you can noticeably feel the steering response becomes more sensitive, making long drives less tiring. Regular maintenance is essential to check the EPS system periodically, as low voltage might also affect the power assist performance—don't overlook the battery health. Paying attention to these details can significantly enhance the driving experience.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

How is the fuel consumption of the 4th generation Emgrand?

After two rounds of comprehensive testing covering over 200 kilometers each in various road conditions including city streets, ring roads, and highways, the actual measured fuel consumption of the 4th generation Emgrand is around 6.8 liters per 100 kilometers. Compared to the officially announced fuel consumption level of 6.5 liters per 100 kilometers, the actual measured 6.8 liters is still a good performance. The factors affecting fuel consumption are as follows: Rough roads consume more fuel: Traffic congestion or uneven road surfaces force the vehicle to drive in low gear for extended periods, inevitably increasing fuel consumption; Using the trunk as storage increases fuel consumption: Treating the trunk as a warehouse and stuffing it with all sorts of items, useful or not, increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in vehicle weight can lead to a corresponding decrease in fuel consumption by several percentage points. Incorrect driving habits can double or triple fuel consumption: Poor driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.
20
1
Share

Which Kia model is the Sportage?

Sportage is the Kia Sportage model, produced by Dongfeng Yueda Kia. Taking the Kia K2 as an example. Overview of the Kia K2: The Kia K2 is a model under Dongfeng Yueda Kia, launched during the 2011 Shanghai International Auto Show and officially released in July 2011. As Kia's second main domestic A0-class model, the K2's design follows the latest family trends. Powertrain of the Kia K2: In terms of power, the K2 is equipped with 1.4L and 1.6L engines. The 1.6L engine is the same as the one used in the Forte, delivering a maximum power of 90.4 kW at 6300 rpm and a peak torque of 155 Nm at 4200 rpm. The 1.4L engine, model G4FA, produces a maximum power of 78.7 kW at 6300 rpm.
17
1
Share

What are the differences between the Mitsubishi Outlander and the Kodiaq?

The main differences between the Mitsubishi Outlander and the Kodiaq can be summarized in three aspects. Different fuel supply methods: The new Outlander adopts multi-point electronic fuel injection; while the Kodiaq utilizes direct injection. Engine oil is the lifeblood of an engine. It circulates within the engine to provide protection for all moving components. Different engines: The new Outlander is equipped with a 2.0L L4 engine; whereas the Kodiaq features a 1.4T L4 engine. The automobile engine serves as the power-generating device for the vehicle. Different transmission types: The new Outlander uses a Continuously Variable Transmission (CVT); while the Kodiaq employs a Dual-Clutch Transmission (DCT). The transmission is a device that alters speed ratios and changes the direction of motion.
14
4
Share

What is the solution for Peugeot 3008 burning engine oil?

The solution for Peugeot 3008 burning engine oil is to take it to a professional repair shop for maintenance. Engine oil burning occurs when the clearance between the piston rings and cylinder walls is too large, the piston rings are improperly installed, or their sealing performance deteriorates, causing oil on the cylinder walls to enter the combustion chamber, leading to oil burning. Poor sealing performance of the valve seals, damage to the crankcase forced ventilation valve, or blockage of the crankcase ventilation port, which increases the pressure inside the crankcase, can also cause oil to enter the combustion chamber along with the crankcase gases and participate in combustion. Taking the 2019 Peugeot 3008 as an example: the car has a length, width, and height of 4435mm, 1840mm, and 1652mm respectively, a wheelbase of 2613mm, and is equipped with a 6-speed automatic transmission, with a minimum ground clearance of 178mm. The 2019 Peugeot 3008 has a fuel tank capacity of 60L, a maximum torque of 245nm, front suspension as MacPherson independent suspension, rear suspension as torsion beam non-independent suspension, and a maximum torque speed range of 1400 to 4000 rpm.
14
1
Share

What is the grandvoyager?

grand-voyager is the Chrysler Grand Voyager. The Grand Voyager is a car model produced by the Chrysler Automotive Group. As early as 30 years ago, the Chrysler Automotive Group created an unprecedented vehicle concept called "minivans," which refers to a van-type travel vehicle. Essentially, it embodies the design philosophy of "sedan plus truck" and "comfort plus load-bearing." Subsequently, the international market popularized this type of vehicle and collectively referred to it as "MPV." Introduction to SUV: SUV stands for Sport Utility Vehicle, which is different from ORV (Off-Road Vehicle), designed for rough terrains. The full name of SUV is sport-utility-vehicle or suburban-utility-vehicle, meaning a suburban multi-purpose vehicle. It combines the space functionality of a station wagon with the off-road capability of a pickup truck. Features of SUV: The characteristics of an SUV include powerful performance, off-road capability, spacious comfort, and excellent cargo and passenger-carrying functions.
16
0
Share

Which company is Ketti Auto?

Ketti (Tianjin) Automobile Co., Ltd. was established on May 5, 2019. The legal representative is Ma Fu, and the company's business scope includes: general projects: new car sales; wholesale of auto parts; retail of auto parts; sales of auto decorations; manufacturing of auto parts and components, etc. The following is a related introduction about car overload: Introduction to overload: Overload refers to the actual loading capacity of a transportation vehicle exceeding the maximum allowable limit. Freight overload usually refers to the cargo transported by motor vehicles exceeding the loading capacity of the freight motor vehicle. Relevant legal provisions: Driving an operational passenger vehicle exceeding the approved number of passengers by more than 20% will result in a 12-point deduction; driving an operational passenger vehicle exceeding the approved number of passengers by less than 20%, or driving other passenger vehicles with passengers exceeding the approved number by more than 20%, will result in a 6-point deduction. Driving a passenger vehicle other than an operational passenger vehicle or school bus with passengers exceeding the approved number by less than 20% will result in a 3-point deduction.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.