How to Adjust the Sound Effects on the Buick New Excelle?

What is the Matching Relationship Between Gears and Vehicle Speed?

Here is the matching method between gears and vehicle speed, the reasonable matching relationship between vehicle speed and gears: 1. First gear: Used for starting, generally for speeds below 15 km/h. Suitable for uphill roads, congested roads, muddy or wet roads, and foggy days. 2. Second gear: Shift to second gear when the speed reaches 15 km/h. Second gear is also used for uphill roads, turning roads, narrow roads, and hazy conditions. 3. Third gear: Suitable for driving at around 30 km/h. Shift to fourth gear when driving at 40 km/h, and use fifth gear for speeds above 50 km/h. These are normal driving speeds, and the choice should be made based on road conditions. 4. Upshifting and downshifting: For upshifting, accelerate first and then shift up. For downshifting, decelerate first and then shift down. In other words, the vehicle should shift to the corresponding gear based on its current speed to avoid lugging the engine—this is what matching means. The correct operation is to adjust speed first and then shift gears. Upshifting should be done step by step without skipping gears. The same principle applies to downshifting—decelerate first and then shift down, but downshifting can skip gears. Based on road and traffic conditions, reduce to a safe speed and then directly shift to the corresponding gear.

12

0

Share

What Are the Techniques for Shifting Gears While Driving?

Here are some techniques for shifting gears while driving: 1. Familiarize with the gear positions: Before hitting the road, make sure you are familiar with the positions of all gears. Once on the road, your eyes should focus on the road, pedestrians, and other vehicles to handle any unexpected situations. You cannot afford to look down at the gear lever while shifting, as it can easily lead to accidents. 2. Press the clutch pedal fully: When shifting gears, always remember to press the clutch pedal all the way down. Otherwise, you won’t be able to engage the gear properly. Although you need to press the pedal firmly, the action of pushing or pulling the gear lever should be gentle—avoid using excessive force. 3. Shifting gears: Shifting gears is not difficult. For first gear, pull the gear lever all the way to the left and then push it up. Second gear is simply pulling down directly from first gear. For third and fourth gears, release the gear lever to neutral and then push or pull it up or down directly. Fifth gear involves pushing the gear lever all the way to the right and then pushing it up. Reverse gear is located directly behind fifth gear. In some cars, you need to press down the round knob on the gear lever to engage reverse, while others don’t require this—it depends on the specific car model.

9

3

Share

What Are the Functions of Car Cleaning Agents?

Here are the functions of car cleaning agents: 1. Wetting effect: After the cleaning agent comes into contact with the dirt particles on the car's surface, the strong wetting force of the cleaning solution allows the surface of the object being cleaned to be easily wetted, promoting full contact between the two. The surface of the dirt particles and the tiny gaps within the dirt aggregates can be deeply wetted, thereby weakening and loosening the bond between the dirt and the cleaned surface. 2. Adsorption effect: The inorganic ions formed by the electrolytes in the cleaning agent bind with the dirt particles, altering the electrostatic attraction of the dirt particles and preventing redeposition of dirt. When cleaning the exterior of a car, both chemical adsorption (attraction similar to chemical bonds) and physical adsorption (intermolecular attraction) occur. 3. Suspension effect: The surfactant in the cleaning agent forms a molecular layer arranged in a specific orientation on the surface of the dirt particles, further enhancing the cleaning effect. After the surfactant molecules come into contact with the dirt particles, the hydrophobic end binds with the dirt particles, while the hydrophilic end binds with water. The molecules arranged in a specific orientation around the dirt particles tightly combine the dirt particles with the surrounding aqueous solution, integrating hydrophobic substances with hydrophilic substances, causing the surface dirt to detach and then suspend in the cleaning agent. 4. Cleaning effect: Using a high-pressure water gun to wash away the dirt. Through the continuous cycle and combined action of wetting, adsorption, dissolution, suspension, and cleaning, the dirt on the car's surface can be effectively removed.

10

3

Share

What are the differences between cabin air filters and engine air filters?

Cabin air filters and engine air filters differ in the following aspects: 1. Different locations: The cabin air filter is located inside the glove compartment on the passenger side of the vehicle, and can be found by removing the cover; The engine air filter is located on the right side of the engine under the hood, housed in a box connected to the engine via a pipe. Some engine air filters are cylindrical in shape, hence also referred to as air filter cartridges. 2. Different functions: The cabin air filter is used to filter air entering the vehicle through the air conditioning system, removing external dust when in external circulation mode, thereby protecting the vehicle occupants; The engine air filter is used to filter air entering the engine, removing dust particles from the air to provide clean air for the engine combustion chamber, thus protecting the engine. 3. Different replacement intervals: Both should be replaced and maintained frequently. The cabin air filter should be replaced approximately every 10,000 kilometers or every six months, depending on the external driving environment. If the environment is relatively humid or prone to smog, the replacement interval should be shortened accordingly, normally every 3-6 months; The engine air filter should be replaced approximately every 15,000 kilometers. In cases of severe smog or willow catkins, the replacement interval should also be shortened.

17

3

Share

Why Are Parallel Import Cars Cheaper?

Parallel import cars, also known as parallel trade import cars or simply parallel trade cars, refer to vehicles purchased by traders from overseas markets and introduced into the Chinese market for sale without authorization from the brand manufacturers. The reason they are cheaper is that they bypass the multiple price markups by intermediate dealers, among other factors. The advantages of parallel import cars include the following: 1. Significant price advantage: Parallel import cars circumvent sales channels such as general distributors, regional dealers, and 4S stores, eliminating many intermediate links. Moreover, parallel import car dealers are not restricted by manufacturers in pricing, giving them more freedom, which results in substantial price discounts. Typically, parallel import cars are 10% to 20% cheaper than China-spec cars. 2. Model and delivery time advantage: Sometimes, when new cars are launched overseas, they may not be immediately available in China due to the automakers' strategic plans or domestic certification processes. However, parallel import cars have a natural advantage in this regard, as they can be freely purchased overseas and then shipped to China for sale, significantly reducing the waiting time for new models. 3. More diverse model configurations: Another advantage of parallel import cars is the ability to purchase overseas models not available in China. Generally, to align with the Chinese market positioning strategy, automakers make certain adjustments or modifications when importing overseas models to China. In contrast, parallel import cars are directly imported from regions such as North America and the Middle East, and their configurations may differ from those of China-spec cars.

5

Share

What are the impacts of installing a snorkel?

The impact of modifying a snorkel is that it will not pass the annual inspection. The more official term for a snorkel is 'high-position intake pipe' or 'water wading device,' which, in simple terms, is an extended intake pipe. Below is relevant information about snorkels: 1. Function of a snorkel: The true purpose of a snorkel is to assist the engine in operation, allowing it to breathe fresh air and gain more power. Thus, water wading is merely a side effect of the 'snorkel.' If a car needs to traverse relatively deep water, installing a snorkel is only one aspect. It is also necessary to remove all electronic devices from the dashboard, such as navigation systems and CD players, and then reinforce waterproofing measures for all lighting fixtures. Although the low voltage in cars makes short circuits unlikely. 2. Water wading height is determined by the intake height: Because the half-height of the wheels is only a reference figure, the height of the exhaust pipe is irrelevant to water wading, as the high pressure of the exhaust can expel water. Of course, to maintain this pressure, the engine must maintain sufficient RPM; otherwise, water may still enter the exhaust pipe. However, even if the water depth does not reach the intake height, one should not recklessly enter the water, as buses or large trucks passing by can create waves that easily pose a water ingress threat to surrounding vehicles.

14

4

Share

How to Adjust the Sound Effects on the Buick New Excelle?

What is the Matching Relationship Between Gears and Vehicle Speed?

What Are the Techniques for Shifting Gears While Driving?

What Are the Functions of Car Cleaning Agents?

What are the differences between cabin air filters and engine air filters?

Why Are Parallel Import Cars Cheaper?

What are the impacts of installing a snorkel?

How to Enable Automatic Folding for CT6 Rearview Mirrors?

What is the brake pad model for the Tiggo 3xe?

How is the horsepower of a truck calculated?

In which countries are car steering wheels on the right side?