How to Adjust the Softness and Hardness of Airbag Seats?

What is the reason for the right reverse parking pressing the left corner of the garage?

The reason for the right reverse parking pressing the left corner of the garage is insufficient driving proficiency. Here are the specific explanations for the reasons why the right reverse parking presses the left corner of the garage: 1. The wheel presses the right front corner: The car body is not aligned properly when parking, and the distance between the rear of the car and the garage space is closer than normal. At this time, if the reverse parking operation is performed, the longitudinal distance between the rear of the car and the garage space will become smaller and smaller. 2. The wheel presses the left front corner: The car body is not aligned properly. This results in the rear of the car being farther from the garage space than normal when parking. 3. The rear of the car sweeps the left or right boundary line of the garage space: The rear of the car sweeps the right boundary line of the garage space. The timing of straightening the steering wheel when entering the garage is a bit late. If the rear of the car sweeps the left boundary line of the garage space, it means the steering wheel was straightened too early when entering the garage.

18

0

Share

How to Check the Wear Degree of Corolla Brake Pads?

Methods to check the wear degree of Corolla brake pads are as follows: 1. Check the thickness of the brake pads. The thickness of new front and rear brake pads is 10 millimeters, and the wear limit of the brake pads is 1 millimeter. When the remaining thickness is 1 millimeter, they need to be replaced. 2. When you feel very strenuous when stepping on the brake, it must be replaced. Methods to prevent excessive wear of brake pads are as follows: 1. During steep descents, reduce the speed in advance and use the appropriate gear. Using engine braking in conjunction with the operation of the braking system can effectively reduce the burden on the braking system and avoid overheating. 2. Do not turn off the engine during downhill driving. Most cars are equipped with a brake vacuum booster pump. Once the engine is turned off, the brake booster pump not only fails to assist but also creates great resistance to the brake master cylinder, significantly increasing the braking distance. 3. When driving an automatic transmission car in the city, always release the throttle in time, regardless of speed.

2

0

Share

How much impact does filling a Mercedes-Benz C200 with 92-octane gasoline have?

According to the official vehicle manual recommendation, the Mercedes-Benz C200 should use 95-octane gasoline. Filling it with 92-octane gasoline will have an impact. If the Mercedes-Benz C200 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can lead to the following effects: For vehicles recommended to use lower-octane gasoline, mistakenly using higher-octane gasoline will not cause damage, but the increase in octane rating will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in a noticeable decline in performance. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Due to the significantly lower octane rating, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it may only increase noise without obvious engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring in extreme cases. In addition to checking the recommended gasoline grade in the vehicle manual, the Mercedes-Benz C200's fuel cap also indicates the appropriate octane rating. Generally, the gasoline grade can also be determined by the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a ratio between 10.0-11.5 should use 95-octane gasoline. However, with advancements in technology, the compression ratio alone cannot solely determine the required gasoline grade. High-compression engines can be tuned to use lower-octane gasoline due to other influencing factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, higher gasoline grades have higher octane ratings and better anti-knock properties. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane.

13

3

Share

What kind of engine oil is good for private cars?

Engine oil is not divided into household or non-household use, it depends on the vehicle. Some of the better engine oil brands include Mobil 1/0W-20 Full Synthetic, Castrol EDGE/0W-40, LIQUI MOLY Premium/5W-40, Valvoline SynPower/0W-20, and Motul 8100X-cess/5W-40. First: Mineral oil. If the vehicle does not have high mileage, around 5,000 kilometers in six months, and can ensure timely maintenance, or if it has a low displacement, is non-turbocharged, and is an economical vehicle, then mineral oil is more suitable for individuals. It can meet the lubrication performance requirements of the vehicle while making maintenance more economical. Second: Semi-synthetic oil. It is a blended product made by mixing mineral oil and full synthetic oil in a certain proportion and adding additives. Its performance is better than mineral oil, making it a very balanced product with good cost-effectiveness. It has an oil change interval of 7,500 kilometers and is suitable for most vehicle models. Third: Full synthetic oil. It performs much better in low-temperature fluidity compared to mineral and semi-synthetic oils. In winter, with the same viscosity, full synthetic oil allows the vehicle to start faster and reach lubrication points more quickly. At high temperatures, due to its better oxidation resistance, full synthetic oil has a much longer oil change interval than semi-synthetic and mineral oils, typically over 10,000 kilometers. Although the cost is higher, considering the number of oil changes and performance, it may not necessarily be much more expensive than the first two types of oil.

4

3

Share

Is There a Time Limit for Hill Start?

There is a time limit for hill start. If the vehicle is not started within 30 seconds after stopping, it will be considered a timeout and result in failure. Below are the specific details about hill start: Not stopping at the pole line: If the front bumper of the car or the front axle of the motorcycle does not stop at the pole line and exceeds 50 cm forward or backward, 20 points will be deducted. Body distance: If the body of the vehicle is more than 30 cm away from the road edge line after stopping, 20 points will be deducted. Vehicle rollback: If the vehicle rolls back 30 cm but not more than 50 cm after starting, 20 points will be deducted. If the vehicle rolls back 50 cm after starting, the test will be considered a failure. Stalling: If the vehicle stalls on the slope, 20 points will be deducted. Other precautions for the Subject 2 driving test are as follows: The first thing to do after getting into the car is to adjust the seat and mirrors to a comfortable position and state, and always fasten the seatbelt. For parallel parking, make sure to find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the speed of the vehicle. For right-angle turns, find the reference point and react quickly to turn, coordinating with the speed of the vehicle to avoid deviation. For curve driving (S-curve), the safest method is to slow down and proceed cautiously. When reversing into a parking space, control the speed, find the reference point accurately, and make slight adjustments if there is any deviation observed in the mirrors.

12

0

Share

Which Brand of Tires is the Most Wear-Resistant?

1. Bridgestone Tires Bridgestone Tires is an authentic Japanese tire brand. Bridgestone is quite similar to the domestic Dunlop, with no particularly distinctive features, belonging to a more neutral category. Overall, its performance in various aspects is decent, with comfort and quietness second only to Dunlop. It is the most wear-resistant among high-end brands. 2. Pirelli Tires Pirelli is the main sponsor of Inter Milan, with its logo prominently displayed on the team's jerseys. When Pirelli first entered the Chinese market, it even specially printed Chinese characters on the jerseys for a match, highlighting its emphasis on the Chinese market. 3. Dunlop Tires Dunlop was the second tire brand to participate in F1, currently ranking second in the number of F1 Grand Prix wins. Although it has withdrawn from F1, it now primarily sponsors the German Touring Car Masters (DTM), A8 Touring Car Series, and MotoGP. It is also a major sponsor in various off-road competitions, as Dunlop is considered the best in off-road tires. 4. Michelin Tires Michelin is known for its comfort-oriented tires, with comfort levels close to Continental, but its grip and wear resistance are average. Michelin ranks second in global tire sales, just behind Bridgestone. It mainly supplies mid-range products for some top-tier car brands, such as the BMW 5 Series and Mercedes-Benz E-Class and C-Class. 5. Goodyear Goodyear is the world's largest tire manufacturing company, headquartered in Akron, Ohio, USA. The company produces tires, engineered rubber products, and chemical products in over 90 factories across 28 countries. Today, Goodyear employs more than 80,000 people worldwide.

9

3

Share

How to Adjust the Softness and Hardness of Airbag Seats?

What is the reason for the right reverse parking pressing the left corner of the garage?

How to Check the Wear Degree of Corolla Brake Pads?

How much impact does filling a Mercedes-Benz C200 with 92-octane gasoline have?

What kind of engine oil is good for private cars?

Is There a Time Limit for Hill Start?

Which Brand of Tires is the Most Wear-Resistant?

What Causes the Squeaking Noise When Releasing the Brake?

Why Don't New Cars Need Break-in Periods Nowadays?

Do You Need to Press the Clutch Every Time You Slow Down?

Why Can Sleeping in a Car with the Air Conditioner On Be Deadly?