How to adjust the second-row seats of the Trumpchi GM8?

2 Answers
DelPiper
07/28/25 2:17pm
Open the car door, enter the vehicle, and locate the seat adjustment switch. Push the left button forward or backward to adjust the seat's front and rear position, push the button up or down to adjust the seat height, and use the right button to adjust the seat angle.
Was this review help?
15
4
Share
LeMaddox
08/11/25 10:23pm
I remember frequently adjusting the second-row seats when driving the Trumpchi GM8 on family trips. There are electric buttons on the side—pressing the front and rear arrows slides the seat, which can move out up to nearly half a meter. The backrest angle is adjusted with a circular button; pressing backward reclines it, while pressing forward makes it sit upright. The legrest button is on the inner side of the armrest, and when raised, the calves can rest flat. After lowering the seat armrest, it can also move sideways, making it easier to care for a child in the adjacent car seat. On hot days, the ventilation button near the AC panel provides a cool breeze on the back, which feels incredibly comfortable. These features have proven especially helpful for elderly passengers and those prone to motion sickness, allowing them to adjust their seating position anytime during the ride.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What Causes the Burnt Smell When Accelerating Hard?

Reasons for the burnt smell when accelerating hard are: 1. Electrical system malfunction in the vehicle; 2. Severe brake pad wear generating heat and producing a burnt odor; 3. Aging of plastic pipes in the vehicle. The functions of the accelerator are: 1. Controlling the engine speed by adjusting the pedal pressure; 2. The accelerator regulates the carburetor to determine the engine's output power. The working principle of the accelerator is: Pressing the accelerator pedal directly controls the throttle valve, increasing its opening to allow more air into the engine. The ECU then commands the fuel injection system to increase fuel supply, raising the engine's RPM and thus accelerating the vehicle.
4
2
Share

What Causes the Red Light on the Car Temperature Gauge to Flash in Winter?

The reason the red light on the car temperature gauge flashes in winter is: the flashing red light indicates that the coolant temperature has exceeded the specified value, and the vehicle should be stopped immediately. The light will turn off once the temperature returns to normal. The causes of the car temperature gauge alarm are: 1. Lack of antifreeze; 2. The thermostat fails to open properly or is stuck; 3. Reduced water pump efficiency leading to poor water circulation; 4. The cooling fan does not operate properly or runs too slowly when the temperature rises. Solutions for the car temperature gauge alarm are: 1. Lack of antifreeze: Check for leaks, repair, and refill to the correct level; 2. Poor water circulation: If the thermostat fails to open properly or is stuck, it needs to be replaced.
11
4
Share

What is the method for resetting the maintenance reminder of Dongfeng Fengshen Yixuan?

Dongfeng Fengshen Yixuan maintenance reminder reset method is: 1. Turn on the ignition switch, hold the reset button for 5 seconds and then turn it off; 2. Hold the reset button for 5 seconds until the clock and mileage on the dashboard disappear, then release; 3. Hold the reset button for 5 seconds again and turn on the ignition switch, at this time the maintenance reminder on the dashboard will flash; 4. Keep holding the reset button until the maintenance reminder stops flashing, then release; 5. Turn on the ignition switch or start the vehicle to check if the maintenance reminder has been reset. Taking the 2020 Dongfeng Fengshen Yixuan as an example, it is a compact car with body dimensions of: length 4660mm, width 1812mm, height 1490mm, wheelbase 2680mm, luggage compartment volume 454l, and body weight 1235kg.
2
0
Share

What happens if the car radiator freezes?

If the car radiator freezes, the following situations may occur: the liquid inside the car cannot circulate, and the car continues to overheat without dissipating heat. The function of the car radiator is to dissipate excess and unnecessary heat from the engine, ensuring that the engine operates at normal temperatures under various speeds or driving conditions. The reasons for high temperature in the car radiator include: 1. Insufficient water level; 2. Radiator blockage, leading to poor circulation and backflow; 3. Radiator leakage obstructing water circulation; 4. Abnormal operation of the thermostat in switching between large and small circulation; 5. Damaged cooling fan or short circuit in the wiring causing the fan to stop working, or the cooling fan rotating very slowly; 6. Problems with the fan water temperature sensor.
17
3
Share

What brand is Atlas tires?

Atlas is a tire brand under the American Linglong Tire, also producing off-road tires for unpaved surfaces. As early as 1935, it collaborated with Goodyear to manufacture Atlas tires and was once a benchmark in the U.S. premium tire market. In 2009, it was acquired by China's Ruyi Group and officially entered the Chinese market in 2017. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high/low temperatures during operation. Therefore, they must have high load-bearing capacity, traction, and cushioning performance, as well as high wear and flex resistance, with low rolling resistance and heat generation. They directly contact the road surface and work with the vehicle suspension to absorb shocks, ensuring good ride comfort and smoothness, maintaining excellent adhesion between the wheels and the road, improving traction, braking, and off-road capability, and bearing the vehicle's weight. For daily use of Atlas tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear, the tread grooves gradually become shallow. If the tread is worn out, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may lead to blowouts at high speeds. Additionally, promptly remove stones stuck in the grooves. Park on flat ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires can overheat, and pressure may increase. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear caused by dragging on the road.
19
4
Share

What does it mean when the skid yellow light on the dashboard is on?

The skid yellow light on the dashboard being illuminated indicates that the vehicle stability control system has intervened, is currently working, or there is a malfunction in the vehicle stability control system that requires timely repair. The vehicle stability control system includes functions such as the electronic brake force distribution system, anti-lock braking system, traction control system, and vehicle dynamic control system. The principle of the vehicle stability control system is as follows: through the ABS electronic control unit, based on the signals sent by the wheel speed sensors of the car, the slip rate of the wheels and the vehicle speed are determined through calculation and analysis. The electronic control unit then adjusts the slip rate of the wheels by controlling the throttle opening and brake pressure.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.