How to adjust the seat of Trumpchi GS4?

What to Do When There's White Lime on the Car That Can't Be Wiped Off?

Solutions for white lime on the car that can't be wiped off are as follows: 1. Neutral car wax: Use neutral car wax to wipe it off. 2. Vinegar wash: Wipe with a towel dipped in edible vinegar. 3. Auto beauty shop: If the above methods don't work, go to an auto beauty shop for polishing as soon as possible. Methods for dealing with a dirty car are as follows: 1. Small vacuum cleaner: Use a vacuum cleaner to suck out all the debris from the gaps. 2. Fabric softener: It can reduce static electricity. Just add some fabric softener to water to make the car less prone to dust. 3. Coating: It can keep the car clean for a long time and make subsequent maintenance more convenient.

1

4

Share

What is the function of the rearview mirror?

Here is a detailed introduction to the functions of the rearview mirror: 1. Observing road conditions: While driving, the driver can observe the road conditions on both sides through the rearview mirror, enabling lane changes, overtaking, and other maneuvers. 2. Reference points: During operations such as parallel parking or reversing into a parking space, the rearview mirror can be used to identify reference points. 3. Judging the distance to the vehicle behind: Pay special attention to the center rearview mirror, as it helps determine the distance to the vehicle behind. When the front wheels of the following vehicle are just visible in the center rearview mirror, the distance is approximately 13 meters. When the grille is visible, the distance is about 6 meters, and when the grille is just out of sight, the distance is roughly 4 meters.

8

0

Share

How to turn off the VSA vehicle stability control system light?

To turn off the VSA vehicle stability control system light, simply locate the control switch. Here is some information about VSA: 1. VSA light: The full English name is Vehicle-Stability-Assist, which essentially means electronic stability control system. 2. VSA indicator light on: This does not indicate that the electronic stability control system is active, but rather that it is turned off. Reasons for the VSA vehicle stability control system light being on include: 1. Fault in the electronic stability control system: In this case, the vehicle can still be driven, but it is important to avoid high-speed sharp turns to prevent oversteering. 2. Carbon deposits on the piston top: Carbon deposits can lead to poor atomization, resulting in incomplete combustion. This situation requires repair at a maintenance shop.

6

1

Share

How to Remove the Steering Wheel of a Citroen C4L?

The steering wheel is very easy to remove. Use a mirror to look at the back of the steering wheel, press downward with a small screwdriver, and the airbag claws will pop out by themselves. The three claws can be removed in seconds. Pay attention to the airbag wiring harness. First, pull the white lock outward, then pinch the yellow plug and pull it outward with force. After removing the airbag, you will see a V-shaped metal rod. The airbag claws are hooked onto it. For the original car's airbag wiring harness, unplug one and replace one to avoid mistakes. To remove the steering wheel, use an M12 spline. Hold the wheel with your left hand and apply slight force with your right hand, and it will come off.

12

0

Share

How is the GS4235T engine?

GS4235T is equipped with the Trumpchi Ti-POWER powertrain, with a maximum power output of 112 kW and a peak torque of 235 Nm. Here are the specific details about the Trumpchi GS4: 1. Vehicle positioning: The Trumpchi GS4 is a compact SUV under GAC Motor. 2. Configuration: The 235T model is paired with a 6-speed automatic transmission and four-wheel drive, featuring a plug-in hybrid system composed of a 1.5L Atkinson cycle engine and the G-MC electric coupling system. 3. Fuel consumption: The gasoline version of the GS4 has a fuel consumption of 6.8 liters per 100 km, while the hybrid version reduces it to as low as 4.6 liters per 100 km. The parts commonality rate reaches 50%, and it also comes with the ADiGO intelligent connectivity system and autonomous driving system.

17

2

Share

Why Doesn't the Dash Cam Record Continuously?

Here are the specific reasons why a dash cam may not record: 1. Motion detection is enabled: If motion detection is turned on, the dash cam will not record when the scene is static. Turn off this function and try again. 2. Memory card issues: The memory card may have insufficient speed, encounter errors while storing video files, or have other inherent problems. You can choose to format the memory card and then restore the dash cam to its initial settings. 3. Loop recording is not enabled: Loop recording divides videos into segments of a certain duration and stores them in the memory card. Once the memory card is full, the oldest video segments are automatically deleted. If loop recording is turned off, videos will not be automatically deleted and will continue to be stored in the dash cam until the storage space is full, causing the dash cam to stop recording. Enable loop recording and set the time to 3 or 5 minutes.

5

2

Share

How to adjust the seat of Trumpchi GS4?

What to Do When There's White Lime on the Car That Can't Be Wiped Off?

What is the function of the rearview mirror?

How to turn off the VSA vehicle stability control system light?

How to Remove the Steering Wheel of a Citroen C4L?

How is the GS4235T engine?

Why Doesn't the Dash Cam Record Continuously?

How to Fasten the Seat Belt on a Bus?

What to Do If Road Construction Misleads into Wrong-Way Driving?

How to Use the Cruise Control on Toyota Highlander?

How to Repair a Dropped Car Headliner?