How to Adjust the Seat for Driving Test Subject 2?
3 Answers
Driving Test Subject 2 seat adjustment methods are: 1. Vertical adjustment: Adjust the seat up and down so that there is at least one fist distance between the head and the car roof. If the seat is too high, the head may touch the roof when the vehicle bumps, affecting driving; 2. Horizontal adjustment: When the foot presses the brake pedal to the deepest point, the leg should still have a certain bend. This seat position is more appropriate. Driving Test Subject 2 has twenty-four class hours and five test items. The first item is reversing into a garage, the second item is parallel parking, the third item is stopping and starting on a slope, the fourth test item is turning at a right angle, and the fifth test item is curve driving.
Adjusting the seat for the driving test's Subject 2 is particularly important, and it took me over ten years of driving to realize this. After getting in the car, first adjust the forward and backward distance. Sit in the driver's seat and test the clutch pedal—your knees should be bent at about 30 degrees, which is most comfortable, allowing your feet to fully contact the pedals without strain. Adjust the height so that your eyes are level with the front edge of the hood, ensuring a clear view of both the dashboard and the road ahead. Set the backrest angle to nearly 90 degrees—an upright posture supports your back and makes steering wheel operation easier. After adjustments, don’t forget to test the brake and accelerator pedals and check the rearview mirror angles to ensure no obstructions. Poor posture during the reverse parking exercise in Subject 2 can easily cause misalignment of reference points, so fix your seat position before the test and avoid moving it. During practice, pay attention to comfort, as it affects overall driving safety. Additionally, ensure the seatbelt is snug but not too tight for better performance.
As a newly licensed driver, I found seat adjustment crucial for the driving test's second subject. After getting in the car, first adjust the front-back position by pulling the lever under the seat to slide it until your legs bend slightly when pressing the clutch - comfortable without overstretching. Then adjust height up or down to see both the hood and road clearly, avoiding obstruction. Don't recline the backrest too far; I keep it upright for better posture and fewer mistakes. Last practice I failed reverse parking because improper adjustment blocked the mirror's view of guidelines. My instructor emphasized taking time to secure the perfect position before testing. Remember: practice makes perfect - proper seat setup ensures clear reference points and smooth operation during Subject 2.
