How to Adjust the Rearview Mirrors on the Geely Boyue?

2 Answers
LeVincent
07/24/25 9:10pm
Geely Boyue rearview mirror adjustment method is: 1. Adjust the horizon reflection in the left rearview mirror to the center of the mirror; 2. Adjust the reflection of the left side of the vehicle to occupy one-quarter of the right side of the mirror; 3. Adjust the horizon reflection in the right rearview mirror to two-thirds of the mirror's height; 4. Adjust the reflection of the right side of the vehicle to occupy one-quarter of the left side of the mirror. Taking the 2021 Geely Boyue as an example, it belongs to the compact car category with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, fuel tank capacity 58 liters, and curb weight 1575kg.
Was this review help?
10
5
Share
DelGrant
08/10/25 2:33pm
Adjusting the rearview mirrors on the Geely Boyue is quite straightforward. I usually make it a habit to start by adjusting the seat first when driving, ensuring I'm comfortable before operating. In the Geely Boyue, the mirror controls are typically located on the driver's side door panel, featuring a small toggle or button. First, press to select the left or right mirror, then use it to adjust the angle up, down, left, or right. Remember, the standard adjustment is to have the horizon centered in the mirror with a slight view of the rear wheels, which significantly reduces blind spots. I recommend adjusting slowly while parked, setting it correctly in one go—it's too dangerous to adjust while driving. Also, check the mirror's cleanliness during regular car washes, as dust buildup can impair visibility—safety first. Additionally, most Geely Boyue models come with electric adjustment in higher trims, while manual versions are fewer but follow a similar method by directly pushing or pulling the mirror angle.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

Where are the A-pillar, B-pillar, and C-pillar of a car located?

A sedan body has three pillars, from front to back, they are the front pillar (A-pillar), middle pillar (B-pillar), and rear pillar (C-pillar). For sedans, these pillars not only provide structural support but also serve as door frames. The details are as follows: 1. A-pillar: The pillar between the front windshield and the left front door, which can obstruct the view when turning left. 2. B-pillar: The pillar located between the front door and the rear door. 3. C-pillar: The pillars on either side of the rear windshield. Additional information: 1. Front blind spot: The area in front of the car that is not visible from the hood, commonly known as the front blind spot. Several factors contribute to the front blind spot, including the height of the car body and seats, the length of the front end, and the driver's physique. 2. Rear blind spot: The blind spot behind the vehicle, commonly known as the rear blind spot, refers to an area of approximately 30 degrees extending outward from the rear door that is outside the view of the side mirrors. When the front of a following car is near the rear door of the leading car, the following car cannot be seen in the leading car's mirrors, making it prone to sideswipes and rear-end collisions.
13
2
Share

How to Add a Driving License Category?

To apply for adding a driving license category, you must meet the corresponding conditions at the vehicle management office. After passing all the required tests, you will obtain the additional driving qualification. Below is relevant information about driving license additions:1. Laws and Regulations: According to Article 40 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' first-time applicants for a motor vehicle driving license or those applying to add a permitted driving category must schedule the subject two test.2. Application Conditions: To upgrade from original permitted categories C1, C2, C3, or C4 to a B1 license, you need at least 3 years of driving experience and no full-point penalty records in the last two scoring cycles. To upgrade from B1 or B2 to an A2 license, at least 3 years of driving experience and no full-point penalty records in the last two scoring cycles are required. To upgrade from A1 to A2, at least 1 year of driving experience and no full-point penalty records in the last scoring cycle are necessary.
13
3
Share

How to Check the Production Date on a Seat Belt?

There are two places where you can find the production date of a car seat belt: one is in the car manual, and the other is at the end of the seat belt. Below are detailed explanations on how to check the production dates of car seat belts and some other car parts: 1. How to check the production date of a car seat belt: (1) Car manual: In the car manual, you can find information such as the safety inspection qualification mark, manufacturer, production date, and labor safety protection product license of the seat belt. (2) End of the seat belt: There is a label at the end of the seat belt, which includes details like the car brand logo, QR code, seat belt production date, and seat belt code. 2. How to check the production dates of other car parts: (1) Engine production date: The engine production date is usually on the engine's nameplate and can also be seen in the engine number. (2) Car glass production date: The production date of car glass is marked on the glass itself. Some models use the number of black dots to indicate the production week. (3) Tire production date: The production date of a tire is on the side of the tire, specifying the week of the month it was produced. (4) Headlight production date: The production date of car headlights is on the label inside the headlight. It is normal for the two headlights to have different production dates.
16
0
Share

How many speakers does the BYD F0 have?

BYD F0 is equipped with 2 speakers. Here are the relevant details: 1. Introduction to BYD F0: The F0 is a small-displacement sedan launched by BYD on a brand-new technological platform, with a displacement of 1.0L. The vehicle is powered by the all-new BYD371QA engine, a mature and eco-friendly engine entirely developed by BYD. Compared to similar models, it boasts superior fuel economy and significant advantages in terms of power, handling, and safety. With dimensions of 3460×1618×1460mm, the F0 ensures a spacious interior. Its stylish and attractive exterior incorporates popular international microcar design elements while reflecting traditional Chinese cultural values, catering to the preferences of domestic consumers. 2. Advantages: Fashionable design: The F0's stylish appearance is inspired by the Toyota AYGO. Its smiling front grille, streamlined body, and rounded rear end make it visually appealing. Excellent value for money: The F0 Comfort model has a guide price of 40,900 RMB, with additional discounts of over 4,000 RMB. It comes equipped with ABS+EBD, a CD player, VMP intelligent power steering, and an all-aluminum engine, making it a great deal. Outstanding handling: BYD promotes the F0 as featuring a 4-wheel independent suspension system with front and rear subframes, though the rear torsion beam suspension is only semi-independent. However, the F0's rear suspension is well-built and tuned to be relatively stiff, delivering excellent handling with minimal body roll during turns and stable high-speed performance.
6
3
Share

What is the maintenance cycle for the CFMoto 250SR?

The maintenance cycle for the CFMoto 250SR is as follows: the break-in period is between 1,500 kilometers and 2,000 kilometers, during which oil changes can be performed at 200 km, 500 km, 800 km, 1,500 km, and 2,000 km intervals. Automotive maintenance items: Maintenance is divided into three parts: basic maintenance, full vehicle inspection, and deep maintenance. Cleaning primarily involves washing off external dirt, tidying up the cabin and interior, ensuring the engine and chassis components remain free of grime, maintaining cleanliness of fuel, oil, air filters, and the battery, and removing debris from the tires. The main focus of inspection is examining the external condition of various assemblies and mechanisms, checking the tightness of external connecting bolts, assessing the technical condition of electrical, lighting, signaling, and instrument systems, and inspecting tire pressure and any external tire damage. Replenishment mainly involves checking fuel, lubricating oil, coolant, brake fluid, battery electrolyte, and the working medium of the air conditioning system, topping up as needed, and inflating tires with insufficient pressure as per regulations. Lubrication involves using specified grades of lubricating oil (grease) according to the vehicle's lubrication chart for regular lubrication, ensuring all lubrication points and vent plugs are intact and unobstructed. The significance of automotive maintenance: The purpose of automotive maintenance is to keep the vehicle clean and in proper technical condition, eliminating potential hazards. It helps prevent faults, slows down the deterioration process, and extends the service life.
13
0
Share

Why does the Volkswagen DSG transmission make abnormal noises?

Most abnormal noises in Volkswagen DSG transmissions are caused by the clutch plates during the separation and engagement process. Some transmission noises are due to issues with the valve body. The dual-clutch transmission is currently a popular type of transmission, with an internal structure similar to that of a manual transmission, except it has two sets of clutches. Volkswagen DSG refers to the brand's direct-shift gearbox, also known as the S-Tronic transmission or double-clutch gearbox. Its unique feature is that it shifts gears faster than other transmissions, delivers greater torque, and operates more efficiently.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.