How to Adjust the Rearview Mirrors on a Lavida Car?

What are the techniques for starting and parking an automatic transmission car on a slope?

Correct method for starting an automatic transmission car on a slope: 1. When starting on an uphill slope, first firmly pull the handbrake. Start the car by pressing the brake pedal with your right foot before starting the engine. 2. Then shift the gear to position 1 or 2 (some models use Pinyin to mark gears 1 and 2, with only high gears marked as D. Do not shift to D). Release the brake and place your right foot on the accelerator pedal. Gradually increase the throttle while slowly releasing the handbrake with your right hand. 3. When going downhill, also use a low gear, either 1 or 2, and avoid pressing the accelerator pedal. Let the car descend by inertia, but keep your right foot on the brake pedal to control the speed. Below are precautions for driving an automatic transmission car: 1. Do not shift to P at traffic lights: When driving in urban areas, you will frequently encounter traffic lights. While waiting, flexibly switch gears based on the traffic light duration. Avoid shifting to P, as the transmission is locked in this position. Although this prevents rolling, if a rear-end collision occurs, it can cause significant impact on the transmission, potentially leading to severe damage or even rendering the transmission useless. For longer waits, it is recommended to shift to N and engage the handbrake. 2. Do not coast in neutral: Many drivers coast in neutral to save fuel, but this is not recommended for automatic transmission cars. The fuel-saving effect is minimal, and coasting in neutral reduces lubrication effectiveness in the transmission oil, leading to wear over time. Additionally, braking distance increases in emergencies, compromising safety. 3. Avoid shifting gears before the car comes to a complete stop: In manual transmission cars, shifting to reverse before the car stops can cause unusual noises in the transmission. Although automatic transmission cars do not produce such noises, shifting gears before stopping can still damage the transmission. Severe cases may even damage the gears. 4. Warm up the car properly: Properly warming up the engine ensures sufficient lubrication during operation, improving power output.

1

3

Share

What does Tianlong Fault Code 10 mean?

Tianlong Fault Code 10 indicates excessive engine vibration caused by unbalanced transmission shaft hanger and rotating shaft. Reasons for Tianlong pressure gauge malfunction: When both pressure gauges fail to work: Power the instrument panel and check for 5±0.5V voltage between A31 and C27. If abnormal, disconnect C27 on the instrument panel from the vehicle's C27 wiring harness and measure C27 on the instrument panel. If still incorrect, there may be an internal instrument panel fault. If normal, check sensors and wiring harness for issues. When only one pressure gauge fails to work: Disconnect A11 and A12 on the instrument panel from the vehicle wiring harness. Short-circuit A13 with A11 and A12 respectively to observe if the pressure gauge works. If not, there may be an internal instrument panel fault. If functional, check sensors and wiring harness. Root causes of faults: This condition mostly occurs in hardware. The final step should be checking the mainboard - whether several capacitors are damaged. The diagnostic card cannot identify the cause of crashes, only problematic hardware components.

5

Share

Where is the Rearview Mirror Heating Switch on the Tiggo 8?

The button for the rearview mirror heating on the Tiggo 8 is the same as the one for the rear windshield heating. Among the physical air conditioning buttons, the one with a small rearview mirror icon next to the front windshield is the rearview mirror heating button. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog, eliminating the need for the driver to frequently wipe the mirrors manually, thus reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed; the driver's side has an adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. Heat is then emitted from both left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly disappears, effectively defogging and deicing the mirror. However, in heavy rain, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. Ensure the car is running when using this function to avoid draining the battery in a stationary state, which could prevent the car from starting. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open the side windows slightly to allow airflow between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help by blowing warm air to defog the mirrors.

20

1

Share

Is a vehicle over 15 years old inspected once a year?

A vehicle over 15 years old is not inspected once a year. For passenger cars and blue license plate minivans: Within the first six years after new vehicle registration, inspection is required every two years; after six years, inspection is required once a year; after fifteen years, inspection is required twice a year. For small and mini non-operational passenger vehicles: Inspection is required every 2 years within the first 6 years; after 6 years, inspection is required once a year; after 15 years, inspection is required every 6 months; if a vehicle has been in use for 15 years and has not been mandatorily scrapped, it needs to be inspected twice a year. Service life: Small and mini taxi passenger vehicles have a service life of 8 years; medium taxi passenger vehicles have a service life of 10 years; large taxi passenger vehicles have a service life of 12 years; rental passenger vehicles have a service life of 15 years.

9

1

Share

Which Wheels Are the Drive Wheels of a Car?

Relevant information about car drive wheels is as follows: 1. Ordinary cars generally have only two rear wheels as drive wheels, with two front wheels as driven wheels, or two front wheels as drive wheels and two rear wheels as driven wheels. 2. All wheels of off-road vehicles and full-time four-wheel-drive vehicles are drive wheels. 3. To distinguish between ordinary cars and off-road vehicles, it is common to use the total number of wheels multiplied by the number of drive wheels for representation. Most vehicles we commonly see adopt a four-wheel configuration, arranged in two rows on the front and rear axles, among which the wheels used to propel the vehicle forward are the drive wheels. Generally speaking, the drive form of a car mainly refers to the number and position of the drive wheels. Based on this basic standard, the method of using front wheels to drive the vehicle is called front-wheel drive, while using rear wheels to drive the vehicle is called rear-wheel drive, both of which belong to the two-wheel drive form. If all wheels participate in driving, it is called four-wheel drive, but according to different working methods, it can be further divided into three types: full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive.

10

4

Share

Is the Jeep Compass purely imported?

The Compass has both imported and domestically produced models, with the imported version being purely imported. The Compass is a compact SUV. Below is an introduction to the four engines equipped in this vehicle: 1. The 1.4-liter turbocharged engine has a maximum power of 121 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5500 rpm and the maximum torque at 2500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. 2. The 1.3-liter turbocharged engine has a maximum power of 127 kW and a maximum torque of 270 Nm, with the maximum power achieved at 5500 rpm and the maximum torque at 1850 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The 2.4-liter naturally aspirated engine has a maximum power of 128.5 kW and a maximum torque of 228 Nm, with the maximum power achieved at 6450 rpm and the maximum torque at 3900 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 4. The 2.0-liter naturally aspirated engine has a maximum power of 109 kW and a maximum torque of 190 Nm, with the maximum power achieved at 6250 rpm and the maximum torque at 4600 rpm. This engine is equipped with D-VVT technology and uses an aluminum alloy cylinder head and block.

4

1

Share

How to Adjust the Rearview Mirrors on a Lavida Car?

What are the techniques for starting and parking an automatic transmission car on a slope?

What does Tianlong Fault Code 10 mean?

Where is the Rearview Mirror Heating Switch on the Tiggo 8?

Is a vehicle over 15 years old inspected once a year?

Which Wheels Are the Drive Wheels of a Car?

Is the Jeep Compass purely imported?

What Causes the Engine Valves to Sometimes Make Noise and Sometimes Not?

Where is the fuel gauge needle located in a small car?

What kind of engine does the Yu Zuan motorcycle have?

Do You Need to Press the Clutch When Releasing the Handbrake?