How to adjust the rearview mirrors of Wuling Hongguang S?
3 Answers
The method to adjust the rearview mirrors of Wuling Hongguang S: 1. Left side: Adjust so that you can just barely see the edge of the car, with the horizon positioned in the middle vertically; 2. Right side: Adjust so that you can just barely see the edge of the car, with the horizon positioned in the middle vertically; 3. Interior rearview mirror: Adjust to see the center of the entire rear window. The Wuling Hongguang S is a vehicle launched by SAIC-GM-Wuling, with dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, and a wheelbase of 2720mm. It is equipped with two naturally aspirated engines, 1.2L and 1.5L, with maximum power outputs of 56kw and 73kw respectively, paired with either a 6-speed manual or a 5-speed manual transmission.
Adjusting the rearview mirrors of the Wuling Hongguang S is actually quite simple, and safety comes first. I've been driving this car for many years, and I've learned that it's best to do this little routine before driving: first, sit in the driver's seat without starting the engine, ensuring you're in a comfortable position. On the left door panel, there's a button or knob—turn it to adjust the left mirror angle until you can just see a tiny bit of your car's body, roughly the edge appearing in the mirror. Do the same for the right mirror, but make sure you can catch a glimpse of the right rear wheel's path in the mirror. As for the center rearview mirror, gently tilt it up, down, left, or right to align with a full rear view. This adjustment reduces blind spots, making lane changes much safer. I recommend checking every three months or before long trips, as road bumps might loosen them. If the knob gets stiff over time, a drop of lubricant will fix it. Remember to adjust on level ground—not on a slope—or the view will be off and cause trouble. Safe driving relies on these habits; the details really make a big difference.
When driving the Wuling Hongguang S, adjusting the rearview mirrors is an essential skill for beginners. I started with this when I was learning to drive. Here’s a simple three-step process: First, sit firmly in the driver’s seat and fasten your seatbelt. Second, locate the control area on the left side of the door—usually a round button or manual knob—select the left mirror position and turn it clockwise or counterclockwise slowly until the mirror shows a small gap on the outer side of the car body while ensuring most of the rear area is visible. Third, adjust the right mirror in the same way. The center rearview mirror can be adjusted by tilting its bracket to cover the direct rear view. After adjusting, start the car and test; if blind spots remain, make minor tweaks. It’s recommended for beginners to practice in an empty parking lot to avoid panic on the road. Also, check the mirrors after parking to ensure they haven’t been moved by others. Developing this habit can significantly boost driving confidence and reaction speed.
