How to Adjust the Rearview Mirrors for Subject 2 Driving Test?

What are the main aspects to test drive a vehicle?

Test driving a vehicle primarily focuses on evaluating the operation of the engine and transmission, as well as assessing the vehicle's performance in terms of handling, power, comfort, and safety. The following are some precautions to consider during a test drive: 1. Prepare documents in advance: Bring your driver's license and ID card to ensure you have them when needed. 2. Driving experience: Many 4S stores require at least two years of driving experience, so make sure you meet this requirement before test driving. 3. Inspect the vehicle's exterior: According to the test drive procedure, you should first ride as a passenger before driving. Before test driving, it's best to inspect the vehicle's exterior. If there are any existing scratches, it's advisable to inform the salesperson in advance and take photos as evidence to avoid unnecessary trouble.

2

0

Share

How many points will be deducted for mistakenly entering the opposite lane at an intersection?

Mistakenly entering the opposite lane at an intersection will result in a deduction of 3 points, and may also be subject to a warning or fine. The relevant regulations are as follows: 1. According to Article 90 of the "Road Traffic Safety Law of the People's Republic of China": If a motor vehicle driver violates the road traffic safety laws or regulations regarding road traffic rules, they shall be given a warning or fined. If there are other provisions in this law, the punishment shall be carried out in accordance with those provisions. 2. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Driving a motor vehicle without following the rules for overtaking or yielding, or driving in the opposite direction, will result in a deduction of 3 points for each violation.

2

Share

What Are the Reasons for Difficulty in Disengaging Gears in a Manual Transmission Car?

Manual transmission car gear disengagement difficulties may be due to the following reasons: 1. Clutch failure: The clutch pedal has excessive free travel, requiring adjustment of its free play; the clutch driven disc is installed backward, necessitating reinstallation; the clutch driven disc is warped, rivets are loose, or the new clutch friction plate is too thick, requiring replacement or addition of shims as needed. 2. Release lever failure: The inner ends of the release levers are not on the same plane, with individual levers deformed, broken, or severely worn, requiring adjustment of the release lever height or replacement of the lever. 3. Mismatch between hub keyway and spline teeth: The gap between the driven disc hub keyway and the transmission first shaft spline teeth is too small or stuck, causing movement difficulties, requiring adjustment of the gap between the two.

11

1

Share

What gear is generally used for manual transmission cars on highways?

Manual transmission cars generally use the highest gear, which is 5th gear, when driving on highways. The matching between manual transmission car gears and speeds is as follows: 1st gear: Used for normal starting or climbing very steep slopes. When using this gear, the speed is generally around 10 km/h. 2nd gear: Used as a transition gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed is generally around 20 km/h. 3rd gear: Generally used when the speed is between 20 km/h and 40 km/h. This gear is often used when driving in urban areas. 4th gear: Can be used when the speed is between 40-60 km/h. 5th gear: Can be used when the speed exceeds 60 km/h. This gear is used when the vehicle is running at high speeds. There are two common mistakes when operating the gear shift: Holding the gear knob too tightly, which leads to stiff shifting movements and even incorrect gear engagement. The correct method is to hold the gear knob lightly, with just enough force to prevent it from slipping. Shifting too quickly. While faster shifting is generally better, shifting too quickly can easily result in selecting the wrong gear. Therefore, no matter how fast you shift, it's best to pause briefly in neutral, allowing the gear lever to return to the center position. This is the best way to avoid incorrect gear selection. When you become familiar with this shifting method, it won't significantly affect your shifting speed.

16

4

Share

What are the reasons for the width indicator light not working?

Reasons for the width indicator light not working are as follows: 1. Bulb or fuse burned out: It may be due to a damaged width indicator bulb or a blown fuse. Check if the bulb and fuse are functioning properly. If they are faulty, simply replace them with new ones. 2. Circuit failure: Open or short circuits in the light switch wiring can also cause abnormal operation of the vehicle's lighting system. The light switch needs to be replaced, and circuit faults must be diagnosed and resolved. Introduction to width indicator lights: 1. Definition: Width indicator lights indicate the width of the vehicle to alert other drivers and following vehicles. On cars, width indicator lights are referred to as front and rear position lights, commonly known as small lights. On larger vehicles, they are called width indicator lights due to their size. On trucks, they are commonly known as side lights. 2. Function: Primarily used during nighttime driving to indicate the presence of the vehicle and its approximate width, aiding other vehicles in making judgments during overtaking or meeting. They must be turned on during nighttime driving, along with the outline marker lights and rear position lights. In foggy or rainy conditions where visibility is poor, it is essential to turn on the width indicator lights to serve as a warning reference for preceding, following, and oncoming vehicles. During dusk driving, turning on the outline marker lights helps other drivers see the vehicle more easily.

11

3

Share

What is Automotive Intelligent Technology?

Automotive Intelligent Technology is a specialized program in Chinese higher vocational education institutions. More details are as follows: 1. Definition: Automotive Intelligent Technology primarily focuses on the fundamental knowledge and skills related to modern automotive electronics and electronic control application technology. It involves the application, debugging, maintenance, and technical management of automotive intelligent technology products. For example, it includes the analysis and design of automotive electronic circuits, the hardware and software design of onboard devices, and the development of automotive intelligent instruments. 2. Career Directions: Graduates can work in automotive-related enterprises and institutions, such as automotive fault detection and repair, auxiliary design of automotive electronic intelligent products, detection and maintenance of new energy vehicles and their components, and the development and technical services of automotive intelligent products.

2

5

Share

How to Adjust the Rearview Mirrors for Subject 2 Driving Test?

What are the main aspects to test drive a vehicle?

How many points will be deducted for mistakenly entering the opposite lane at an intersection?

What Are the Reasons for Difficulty in Disengaging Gears in a Manual Transmission Car?

What gear is generally used for manual transmission cars on highways?

What are the reasons for the width indicator light not working?

What is Automotive Intelligent Technology?

What Causes Abnormal Noise When Pressing the Clutch in a Manual Transmission?

Why Can't Some Used Cars Be Transferred?

How Often Should Valvoline Full Synthetic Motor Oil Be Changed?

What documents are required for driver's license review?