···
Log in / Register

How to Adjust the Rearview Mirror to the Correct Position?

4 Answers
Graham
08/30/25 2:01am

The method for adjusting the rearview mirror is as follows: 1. Left side mirror: The driver should use the horizon as a reference, adjusting the vertical angle so that the sky and ground each occupy half of the mirror. Then adjust the horizontal angle so that the car body occupies about 1/4 of the mirror's surface. 2. Right side mirror: Since the right side mirror is farther from the driver, the space occupied by the sky should be reduced. Therefore, compared to the left side mirror, the right side mirror should have a different ratio of sky to ground, with the sky occupying 1/4 and the ground occupying 3/4. The horizontal angle adjustment is similar to the left side mirror.

Was this review help?
12
3
Share
LaKayden
09/11/25 6:13am

Having driven for over a decade, I've found that properly adjusting side mirrors can significantly reduce blind spot accident risks. The key is to adjust them only after settling into a comfortable driving position with the seat properly set. For the left mirror, I lean left towards the window until the car body occupies just about 20% of the mirror width, with the rest showing distant road and adjacent lane vehicles. The right mirror follows the same principle - sitting upright or leaning right to minimize car body coverage while ensuring blind spot visibility. After adjustment, test driving reveals clear rear traffic views during lane changes or turns, preventing surprise vehicle appearances. I regularly check the alignment since rough roads may cause shifts - safety always comes first.

Was this review help?
18
1
Share
Expand All
Karla
10/25/25 7:04am

I just got my driver's license not long ago, and when learning to drive, I preferred using a simple method to adjust the mirrors. After sitting in the driver's seat and adjusting the seat to a comfortable height, don't start the car yet. Look at the left mirror and adjust it until you can just see a little bit of your car's rear wheel or door handle; do the same for the right mirror. Then quickly check the rearview mirror to ensure a seamless overall view. This method has made me more confident when reversing or changing lanes, without worrying about missing anything. Beginners won't easily make mistakes this way, and with properly adjusted mirrors, driving becomes much smoother.

Was this review help?
11
5
Share
Expand All
SanEmmett
12/08/25 7:28am

I usually focus on efficiency when driving, adjusting the mirrors in just two minutes. After settling into the seat, I position the left rear mirror so the horizon is in the middle. The side mirrors are set wider, with less of the car body showing. This way, I have a clear view as soon as I start driving, reducing blind spot risks. After a quick test drive, if a car suddenly appears from behind, I make slight angle adjustments. It's both time-saving and safe.

Was this review help?
11
5
Share
Expand All
More Forum Discussions

Where is the gasoline filter of Volvo S90 located?

The gasoline filter of this car is located on the firewall behind the engine compartment. Introduction to the oil filter: The oil filter is a component that filters the engine oil. Engine oil contains a certain amount of gum, impurities, water, and additives; during engine operation, metal shavings generated by friction between parts, impurities from the intake air, and oxides in the oil are all filtered by the oil filter. If the oil is not filtered and directly enters the oil circuit, it will adversely affect the engine's performance and lifespan. Removal of the oil filter: Open the engine hood, unscrew the oil cap, locate the oil pan, find the nut on the oil pan, loosen it with a wrench, and place a waste oil bucket underneath to catch the black waste oil. Once the waste oil has completely drained, use a specialized tool to remove the oil filter.
5
5
Share

Is the Volvo S90 equipped with run-flat tires?

The Volvo S90 is not equipped with run-flat tires. Disadvantages of run-flat tires: Run-flat tires are relatively harder, so driving on bumpy roads can feel more intense. Additionally, run-flat tires of the same grade are slightly more expensive than regular tires. Functions of run-flat tires: Run-flat tires not only allow continued driving after losing pressure but also ensure safety. After a blowout, run-flat tires do not immediately collapse because their sidewalls are particularly thick, providing strong support to prevent the vehicle from rolling over. Moreover, vehicles with run-flat tires do not require a spare tire. They can continue driving after a blowout without needing to change the tire, offering convenience and additional trunk space.
11
1
Share

Why does the Wuling Hongguang Mini have no power when starting?

Car cannot start due to battery depletion. Specific reasons: The most common cause of this situation is using in-car electrical appliances for a long time while the engine is off, such as listening to music or running the air conditioning. Frequently draining the battery can cause permanent damage and shorten its lifespan. Other possible issues include ABS sensor failure or starter motor failure. Solutions: First, try jump-starting the battery using another vehicle. If the problem is simply a depleted battery, this should resolve the issue. If jump-starting does not solve the problem, it is recommended to seek inspection and repair from a 4S shop or professional.
18
4
Share

Where to Add Water in Wuling?

For the Wuling Zhiguang, water is added to the small reservoir, whose filler neck is located under the hood at the upper left corner of the engine. Below is some information about the car's cooling system: 1. Main Components: The radiator is part of the vehicle's cooling system. In an engine's water-cooling system, the radiator consists of three parts: the inlet tank, outlet tank, and the core with main fins. 2. Primary Function: When the engine's coolant temperature is high, the water pump circulates the coolant to reduce the engine's temperature, thereby protecting it. In winter, if the coolant temperature is too low, circulation stops to prevent the engine from becoming too cold.
16
3
Share

Why Can't the Wuling Engage Reverse Gear?

Reason: Excessive wear of the keyway causes the gear to deviate from its original axis, resulting in jumping, which prevents engaging reverse gear; incomplete clutch disengagement can also lead to difficulty in engaging reverse gear. Failure inside the gear shift lever assembly: Internal gear wear in the gear shift lever causes it to get stuck, making it difficult to pull forward and backward. This results in the inability to shift gears or experiencing difficulty in shifting. P-lock solenoid valve or brake failure: For safety reasons, to prevent accidentally shifting into other gears when starting the vehicle, the P-lock solenoid valve is installed. This solenoid valve requires a signal from the brake pedal to release. Therefore, these two components are interconnected, and if either one fails, it will prevent the gear shift lever from being pushed out of the P position to engage other gears.
10
3
Share

What type of gasoline should the Toyota Avalon use?

Toyota Avalon is equipped with naturally aspirated engines across all models, so using 92-octane gasoline is sufficient. Gasoline with different octane ratings has varying levels of octane numbers—higher octane gasoline has a higher octane value, which provides better anti-knock performance. The Toyota Avalon is powered by two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The Avalon is a mid-size sedan launched by FAW Toyota. In terms of body dimensions, the car measures 4975mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2870mm.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.