···
Log in / Register

How to Adjust the Rearview Mirror on the Tiguan L?

4 Answers
Ben
07/28/25 2:06pm

Tiguan L's method to adjust the rearview mirror is: 1. Locate the button below the left armrest of the driver's seat; 2. 'L' is for the right rearview mirror, 'R' is for the left rearview mirror; 3. Press the button to adjust up and down. The Tiguan L is a mid-size SUV with body dimensions of: length 4712 mm, width 1839 mm, height 1673 mm, wheelbase 2791 mm, and a fuel tank capacity of 60 liters. The Tiguan L is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission. Its drivetrain is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.

Was this review help?
1
0
Share
OMarcus
08/11/25 6:39pm

I think the key to adjusting the mirrors on SUVs like the Tiguan L is to maximize the field of view. First, adjust the seat to a comfortable position—if your posture is off, the mirrors will never feel right. The round knob on the driver’s door panel with the L and R markings is the control. Turn it to the L position to adjust the left mirror, and press the edges of the knob to move the mirror up, down, left, or right. I prefer setting the left mirror so that the side of the car is just out of view, minimizing blind spots. The right mirror should be adjusted lower, with the rear door handle appearing in the bottom-right corner—this makes judging curbs while reversing much more accurate. After adjusting, take it for a high-speed test drive to see if you can spot approaching cars in the mirrors without turning your head during lane changes.

Was this review help?
19
0
Share
Expand All
LeArabella
09/29/25 3:02am

Adjusting the rearview mirrors is crucial for driving safety. With a large vehicle like the Touareg L, extra caution is needed for blind spots. The first thing I do after changing drivers is adjust the mirrors. First, locate the adjustment buttons on the door panel - there's a small rotary knob on the left with L and R markings. When adjusting the left mirror, position the distant horizon in the center of the mirror with no more than a quarter of the car body visible. For the right mirror, set the horizon slightly higher, occupying about two-thirds of the mirror surface. Don't forget to use the mirror heating function in rainy weather - look for the square icon with wavy lines in the climate control panel. Properly adjusted mirrors make driving much easier, eliminating the need to constantly turn your head to check blind spots.

Was this review help?
10
5
Share
Expand All
DiTyler
11/12/25 4:57am

The adjustment for the Tiguan L's rearview mirrors is located on the driver's door panel, just push the knob with the icon left or right. I set the left mirror to a position where my car's body is just out of sight, while the right one is adjusted to clearly see the curb. For night driving, you can turn on the anti-glare function. Actually, the rearview mirror heating is particularly practical—just press the heating button on the center console before driving in the rain. Properly adjusting them makes driving much more reassuring.

Was this review help?
6
1
Share
Expand All
More Forum Discussions

Can I claim insurance for water accumulation in the car caused by sunroof leakage?

Sunroof leakage causing water accumulation in the car is not covered by insurance. Compulsory Traffic Insurance: In this case, since the water accumulation is caused by sunroof leakage, it depends on the type of insurance purchased. If you have comprehensive insurance or water damage insurance, these may cover the claim. However, if you only have compulsory traffic insurance, the insurance company will not be liable. It is advisable to review the specific terms of your insurance contract. Complete Water Accumulation in the Cabin: Sunroof leakage can range from merely wetting the roof liner to causing complete water accumulation in the cabin. Rainwater can not only "pour" into the car through the sunroof but also flow along the C-pillar to beneath the vehicle's carpet, forming hidden pools of water that are difficult to detect. Wet interior components can lead to mold growth, and rainwater coming into contact with exposed metal parts (where the paint is damaged) can cause rust.
14
0
Share

Where is the switch for a gasoline-to-gas converted vehicle?

Switch is located near the steering wheel. Reasons for gasoline-to-gas conversion: Gasoline prices have been rising continuously, while gas prices are relatively cheaper. For drivers, the cost of fuel is significant, resulting in much lower profits. Conversely, using gas can save a considerable amount of money, naturally leading to higher income. Precautions for gasoline-to-gas conversion: The gas fuel supply system should have effective safety protection structural measures to prevent gas leakage. Each vehicle's gas cylinder outlet (liquid) should have a fuel flow restriction function to ensure automatic closure in case of leakage, rupture, or breakage in the fuel supply pipeline behind it. Therefore, drivers need to pay attention to the vehicle's condition after gasoline-to-gas conversion.
12
3
Share

Can LED headlight modifications pass the annual inspection?

Whether modified LED headlights can pass the annual inspection depends on the specifications and performance of the modified headlights. If the color temperature, brightness, and beam angle of the modified headlights meet the national safety requirements, they can pass the inspection. There are two main aspects to check: Whether the brightness meets the requirements, meaning it must be at least 1400 lumens. Whether the beam angle is compliant, as long as the high and low beams are properly aligned. Essentially, as long as the modified LED headlights do not compromise driving safety, they can pass the annual inspection. Relevant regulations for vehicle annual inspections: Vehicles that fail the inspection must be repaired within a specified period. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further use. Vehicles that do not undergo the inspection without valid reasons or fail the inspection are not allowed on the road or to be transferred. Vehicles that meet the scrapping criteria or exceed the prescribed service life will not be inspected, and their license plates will be revoked, their records deleted, and they will be scrapped.
11
3
Share

How many items are there in the A2 driving test?

A2 driving test consists of 10 items. Basic test items: stake test, slope fixed-point parking and starting, side parking, passing single-plank bridge, curve driving, right-angle turn, speed-limited passing through width-limited gate, passing continuous obstacles, hundred-meter gear shifting, and bumpy road driving. Permitted vehicle types for A2: The permitted vehicle type for A2 license is tractor. Holding a valid A2 license issued by China's public security traffic police vehicle management authority allows driving heavy and medium-sized full-trailer and semi-trailer vehicle trains, as well as the vehicle types permitted by B1, B2, C1, C2, C3, C4, and M licenses. A2 test content: Completing the test items by driving a motor vehicle within the specified area; mastering the motor vehicle driving skills; and the ability to judge the spatial position of the motor vehicle.
20
2
Share

Under what circumstances will the engine report an exhaust camshaft position deviation?

If the relative position misalignment exceeds 1 gear tooth, this fault code will appear. Overview of the camshaft: The camshaft position sensor is installed at the position where the camshaft operates synchronously, providing camshaft position information. The camshaft position sensor has a significant impact on the system's emissions. When the sensor malfunctions, the vehicle will experience difficulty starting, and there will also be obvious poor acceleration during startup. The function of the camshaft is to control the opening and closing of the valves. Symptoms of camshaft failure: Camshaft failure generally manifests as difficulty in accelerating, poor ignition, idle fault light illumination, sudden stalling when the engine is hot, and other phenomena.
20
1
Share

How Long is the ABS Warranty?

ABS warranty period varies with specific vehicle models, generally three years. Functions of ABS: Maximize the effectiveness of the brakes, shorten braking time and distance. Effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability. Allow steering during emergency braking, providing excellent steering control. Avoid severe friction between tires and the ground, reducing tire wear. Working Principle of ABS: During braking, ABS quickly determines the wheel lock-up state based on speed signals from each wheel speed sensor, closes the normally open input solenoid valve on the wheel that begins to lock up, keeping the braking force constant. If the wheel continues to lock up, the normally closed output solenoid valve is opened, causing the brake pressure on that wheel to rapidly decrease due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force. This keeps the braking state always at the optimal point (slip ratio S of 20%), achieving the best braking effect and the highest driving safety.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.