How to Adjust the Rearview Mirror on the Tiguan?

2 Answers
GageMarie
07/30/25 1:54am
The adjustment of the rearview mirror on the Tiguan can be done by pressing the circular button on the mirror to move it up, down, left, or right, corresponding to the desired direction. To adjust the left rearview mirror, move the circular button to the L position, and so on for the others. The specific adjustment positions are as follows: 1. Adjust the horizon reflection in the left rearview mirror to the center of the mirror. 2. Adjust the reflection of the left side of the vehicle to occupy the right quarter of the mirror. 3. Adjust the horizon reflection in the right rearview mirror to two-thirds of the mirror's height. 4. Adjust the reflection of the right side of the vehicle to occupy the left quarter of the mirror.
Was this review help?
3
0
Share
VanSophie
08/15/25 7:48am
As an enthusiast who enjoys studying car settings, I often adjust the rearview mirrors to ensure safe driving. On the Tiguan, the method is simple: first, sit in the driver's seat in your normal driving position; locate the control panel on the inner side of the door, where there are selection buttons for the left and right rearview mirrors—press the button marked L or R to choose which mirror to adjust; then use the circular directional key nearby to push up, down, left, or right, observing the angle change of the mirror outside the window, and adjust it slowly into position. The ideal position is when you can see a small part of your car's body in the mirror, such as a corner of the rear door, ensuring a wide field of view with no blind spots. You should check the mirrors after every long trip or bumpy road, as vibrations might shift them. If your Tiguan is a high-end model, it may come with electric folding or heating functions, but avoid folding them while driving. Once you develop this habit, driving becomes more reassuring and free of hidden risks. I recommend new owners start with simple settings and not worry too much about advanced features—basic adjustments are enough to enhance daily driving safety.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

What are the methods to deal with excessive carbon monoxide in car exhaust?

Clean the three-way catalytic converter. Once this component is clogged or too dirty, it will lose its ability to convert carbon monoxide. Check the dashboard for any engine warning lights. If the air-fuel ratio of the engine cannot stabilize, incomplete combustion may occur.
8
1
Share

What to Do When the Battery is Undercharged and Won't Charge?

Check if the fuse has poor contact and reconnect it. Replace the wiring. If the battery has been used for a long time, the electrolyte may decrease, and it needs to be refilled. Replace the battery.
1
3
Share

How to Shift to Neutral in an Automatic Transmission Without Starting the Engine?

Turn on the power without starting the engine. Press the brake pedal and shift the gear. First shift to N (Neutral) gear, then start the engine, and then shift to D (Drive) gear. Release the parking brake. Lift your foot off the brake pedal and start driving.
17
0
Share

What is the simplest way to reset a car's ECU?

Drive for a while to allow the car to reach normal operating temperature, then park and turn off the engine, shutting down all electrical devices in the car. Open the car's hood, locate the battery, and disconnect the battery's power cables. Wait for 10 minutes before reconnecting, then turn on the power without starting the engine and activate the car's electrical devices, waiting for 30 seconds. Remove the key, and the reset is successful.
12
5
Share

What are the starting and parking procedures for the Volvo XC40?

Make preparations before starting the car. Press the start button to start the engine while holding down the foot brake. Shift the gear to D (Drive), gently release the foot brake to move forward, and press the accelerator pedal if acceleration is needed. Press the foot brake to stop the car. Shift to P (Park) and turn off the engine.
5
3
Share

What is the voltage of the ABS sensor connector?

The voltage of the ABS sensor connector is 5V to 8V, with an output voltage of 650mV to 850mV. During actual measurement, due to the fault protection function of the electronic stability control module, the voltage cannot be sustained after unplugging the ABS sensor connector, so voltage data cannot be used as a judgment criterion. The ABS sensor is an important component of the ABS system. ABS can maintain the directional stability of the vehicle during braking while driving, shorten the braking time and distance, and effectively prevent wheel lock-up and uncontrolled skidding during emergency braking, thereby enhancing the vehicle's controllability and making driving safer.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.