How to adjust the rearview mirror on the Tiguan?

1 Answers
OJames
07/24/25 12:11pm
Tiguan's rearview mirror adjustment method is: 1. Adjust the horizon image in the left rearview mirror to the center of the mirror; 2. Adjust the image of the left side of the car body to occupy one-quarter of the right side of the mirror; 3. Adjust the horizon image in the right rearview mirror to two-thirds of the mirror's height; 4. Adjust the image of the right side of the car body to occupy one-quarter of the left side of the mirror. The function of the car rearview mirror: It reflects the situation behind, beside, and below the car, allowing the driver to indirectly see these positions clearly, expanding the driver's field of vision, and increasing the safety of reversing and driving.
Was this review help?
11
5
Share
More Forum Discussions

What is the method for removing and installing the middle door panel of the Buick GL8?

To remove the door trim panel, you can see the bolts. Simply remove the cable hook and the bolts. More details about the Buick GL8 are as follows: 1. Introduction: As a top-tier MPV model, the Buick GL8 has achieved batch exports with its advantages of luxury, powerful performance, and spacious comfort, and has been praised by Southeast Asian media as the 'perfect MPV'. It has also served as the official courtesy vehicle for major international events such as Beijing's Olympic bid and APEC meetings, with notable figures like Bill Gates, Yo-Yo Ma, and Luciano Pavarotti among its passengers. 2. Advantages: The first major advantage of the GL8 is its 'size'. With a vehicle length of over 5 meters and only three rows of seats, the legroom is so spacious that no one can complain. The second advantage is its 'quietness'. The cabin's wind noise, road noise, and engine sound are all very low during driving, giving a feeling of a premium sedan. Long-distance highway travel is the GL8's most proficient feature. Its power performance is also considered excellent by MPV standards.
13
2
Share

Can a base model Oshan X5 be equipped with a reversing camera?

It is possible to install a reversing camera. Here is some relevant information about reversing cameras: 1. Advantages: The main advantage of installing a reversing camera is that it allows for a very intuitive observation of the real situation behind the vehicle, greatly enhancing driving safety. The downside is that the product's quality, performance, and the craftsmanship of the installer can all affect the user experience. 2. On-board display: Professional on-board probes have further improved anti-magnetic, anti-vibration, waterproof, and dustproof performance. The on-board display uses TFT true color, with anti-magnetic treatment to ensure no signal interference or flickering. It can simultaneously receive two video signals and play VCDs and DVDs without the need for a decoder. It also features automatic horizontal switching for reversing visibility and automatic on/off functions. The dashboard or rearview mirror display can clearly show the information captured by the rear on-board camera. It is also possible to install two rearview cameras to eliminate blind spots when reversing.
1
5
Share

Is the Malibu XL equipped with a three-cylinder or four-cylinder engine?

The 1.3T version of the Malibu XL uses a three-cylinder engine, while the 2.0T model is equipped with a four-cylinder engine. Below are the detailed specifications of the Malibu XL: 1. Model: The Malibu XL is a mid-size sedan powered by two engine options: a 1.3-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. 1.3-liter turbocharged engine: It delivers a maximum power of 121 kW and a peak torque of 240 Nm, with the maximum power achieved at 5,600 rpm and the maximum torque available between 1,500 to 4,000 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 3. 2.0-liter turbocharged engine: This engine produces a maximum power of 177 kW and a peak torque of 350 Nm, with the maximum power reached at 5,000 rpm and the maximum torque available between 1,500 to 4,000 rpm. It also incorporates direct fuel injection technology and uses an aluminum alloy cylinder head and block. The engine is mated to a 9-speed automatic transmission.
19
0
Share

What is the maintenance interval for the Golf 1.4T?

The maintenance interval for the Golf 1.4T is as follows: 1. At 2000 km and 7500 km: Engine oil and oil filter need to be replaced. 2. At 15000 km: Engine oil, oil filter, and spark plugs need to be replaced. 3. At 25000 km: Engine oil, oil filter, cabin air filter, and engine air filter need to be replaced. 4. At 35000 km: Engine oil, oil filter, fuel filter, and spark plugs need to be replaced. 5. At 45000 km: Engine oil, oil filter, and engine air filter need to be replaced. 6. At 55000 km: Engine oil, oil filter, cabin air filter, and spark plugs need to be replaced. 7. At 65000 km: Engine oil, oil filter, fuel filter, engine air filter, brake fluid, transmission fluid, etc., need to be replaced. From the above, it can be seen that engine oil and oil filter are mandatory items for every maintenance. The engine air filter and spark plugs are replaced every 20,000 km, while the fuel filter and cabin air filter are replaced every 30,000 km.
14
3
Share

What is the transmission of the Tiguan L?

The transmission brand used in the Volkswagen Tiguan L is Volkswagen Automatic Transmission (Dalian) Co., Ltd. Volkswagen Automatic Transmission (Dalian) Co., Ltd. is the first wholly-owned subsidiary of the Volkswagen Group. Established on September 24, 2007, the company is located in Dalian and primarily produces the latest dual-clutch automatic transmissions. The Volkswagen Tiguan L uses a 7-speed DQ381 wet dual-clutch transmission. A wet dual-clutch refers to a dual-clutch transmission where the clutch plates are immersed in transmission fluid. For the transmission of the Volkswagen Tiguan L in daily use, the following points should be noted: Do not delay changing the transmission fluid for too long. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and produce a certain impact when shifting back into D (Drive) mode. Never shift into D or R (Reverse) mode before the vehicle has come to a complete stop. Many drivers, to demonstrate smooth operation, shift directly into reverse while the vehicle is still moving, which can significantly damage the transmission gears and, over time, lead to gear grinding and other faults. Avoid frequently climbing steep slopes in D mode. On steep slopes, automatic transmission vehicles may overheat due to high load or shift too early, resulting in insufficient power. In such cases, use manual mode to limit the gear to a lower speed or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while it is in N (Neutral) mode. Do not use a tow rope or tow the vehicle directly with another vehicle.
18
2
Share

What is the storage box in the middle of the car called?

The box in the middle of the car for storing items is called the center armrest box. It is divided into original armrest boxes and modified armrest boxes. It is a car accessory installed between two seats and belongs to the car interior system. It is further divided into front seat center armrests and rear seat center armrests. The front seat center armrest is located in the middle of the front seats, and most front center armrests also come with cup holders and storage functions underneath. The rear seat center armrest is located in the middle of the rear seats, mostly retractable, providing elbow space for rear passengers. The original design intention was to allow car drivers to place their arms during long drives, thereby enabling effective rest for the arms to prevent numbness and stiffness. With the continuous development of manufacturing technology and the constant improvement of production processes, the armrest box has also gained additional storage functions. Some car models even feature storage compartments such as cup holders and card slots between the gear lever and the armrest box. Original Armrest Box: The original armrest box refers to the armrest box that comes with the car when it leaves the factory. Generally lower, it can be used as a storage box under normal circumstances but cannot serve as an armrest. Common modified armrest boxes include: Engineering Plastic Armrest Box: The engineering plastic armrest box mainly uses ABS resin as the primary raw material and is roughly divided into three parts: the main armrest box, the middle connecting trapezoidal box, and the base. Except for the different bases for each car, the styles of the main and secondary armrest (boxes) are basically similar. Engineering plastic armrest boxes have high production volumes, convenient material sourcing, low costs, and affordable prices, making them highly popular in the market. Handcrafted Armrest Box: With the rapid development of the automotive industry, the popularity of family cars, and people's increasing demands for the decorative artistic effects of car interiors, as well as functional and environmental practicality, leather craft armrest boxes have seen unprecedented development. Leather armrest boxes use environmentally friendly high-density boards as the framework, supplemented by injection-molded parts and metal components. The exterior design is human-centered, enhancing driving practicality while also excelling in aesthetic appeal.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.